Fliegl bulk material bucket »Robust«, 2600 mm, painted; Height 1310 mm; Depth 1570 mm; Volume approx. 3.7 m³
€4,115.00
Equipment
- Scraper blade made from HB 500, 200 × 20 mm
- Floor reinforcements to prevent wear-through
- Reinforced side panels
- Spill guard
- Painted finish
Important: The attachment interface will be determined by Customer Service before the order is placed. Please specify your carrier vehicle in the comments field.
Technical data
| Manufacturer | FLIEGL |
|---|---|
| Product type | Bulk material bucket for lightweight bulk materials |
| Working width | 2.600 mm |
| Capacity | approx. 3,70 m³ |
| Depth | 1.570 mm |
| Height | 1.310 mm |
| Scraper blade | HB 500, width 200 mm, thickness 20 mm |
| Unladen weight | approx. 750 kg |
| Attachment | Wheel loader or telescopic handler, depending on type |
| Finish | painted |
Product description
Bulk material bucket with a capacity of 3.7 m³
The bucket is suitable for a range of loads and offers a large capacity. Its ergonomic design, with reinforced side panels and a spill guard, is intended for lightweight bulk materials.
“For lightweight bulk materials” – what this means
This is the most important information when choosing the right bucket.
The relationship: Volume and material density together determine the weight – and therefore what the loader has to carry.
| Material | Bulk density | Weight at 3.7 m³ |
|---|---|---|
| Wood chips | approx. 250 kg/m³ | approx. 925 kg |
| Grain | approx. 750 kg/m³ | approx. 2.775 kg |
| Silage | approx. 700 kg/m³ | approx. 2.590 kg |
| Dry sand | approx. 1.500 kg/m³ | approx. 5.550 kg |
| Gravel | approx. 1.800 kg/m³ | approx. 6.660 kg |
Why the bucket is not designed for heavy materials: With gravel or sand, the bucket would be overloaded long before it was full. Its full capacity could not be used – and the construction is not designed for these loads.
For gravel, sand and excavated material earthmoving buckets with a smaller capacity and heavier construction are the right choice.
Calculating the weight for the loader
| Bucket unladen weight | approx. 750 kg |
|---|---|
| Wood chips | + approx. 925 kg = approx. 1.675 kg |
| Silage | + approx. 2.590 kg = approx. 3.340 kg |
| Grain | + approx. 2.775 kg = approx. 3.525 kg |
What to check: The loader’s rated tipping load must be sufficient for this load at the working height – stability is at its lowest when loading overhead.
With a telescopic handler, reach is also a factor: Its lifting capacity depends directly on the extension. A load that can be lifted easily close to the machine may pose a tipping risk at full reach. The machine’s load chart is decisive.
The floor reinforcements
They prevent the floor plate from wearing through.
Why the floor is the critical area: When penetrating a pile and pushing along the ground, the underside is constantly scraped.
- On concrete and asphalt this acts like sandpaper.
- On gravel surfaces impacts and scratches add to the wear.
- Wear is uneven – it is concentrated in just a few strips.
What the reinforcements do: They take the wear instead of the floor plate becoming thinner. Once the plate has worn through, the bucket is unusable – repairs are rarely worthwhile.
Practical tip: Guiding the bucket flat rather than pushing it along the ground considerably extends its service life.
HB 500 scraper blade
200 mm wide, 20 mm thick, made from highly wear-resistant steel.
What HB 500 means: A Brinell hardness of around 500 – about three times that of ordinary structural steel.
Why it is used here: The scraper blade is the part that first contacts the material and is dragged along the ground. It wears faster than any other component.
The 20 mm thickness and 200 mm width provide a substantial wear allowance. The blade can be used for a long time before it needs replacing.
What a blunt scraper blade means: The bucket no longer penetrates the material, but pushes the pile ahead of it. More power is required and capacity is reduced – while the load on the loader increases.
The spill guard
It is fitted along the top edge of the rear wall.
What it prevents: When lifting and tipping back, material slides towards the rear – without a spill guard, it falls over the rear wall onto the machine.
What this means in practice:
- Material on the vehicle roof – and on the windscreen.
- Contamination of hydraulic cylinders and joints.
- Material loss with every cycle.
- Obstructed visibility – a safety issue.
The effect is particularly pronounced with lightweight bulk materials: Wood chips and grain slide more easily than cohesive materials.
Large tipping angle
The manufacturer lists this as a feature.
Why the tipping angle matters with lightweight bulk materials: Low-density material sticks to the bucket walls – especially when damp.
What a large tipping angle does: The bucket empties completely instead of leaving material behind. With silage, damp wood chips and manure, this makes the difference between one pass and having to shake the bucket repeatedly.
Another benefit: When filling high-sided containers – feed mixer wagons, containers and trailers – the material discharges quickly and in a controlled manner.
The reinforced side panels
They are structurally necessary at this width.
Why: At a working width of 2.600 mm, considerable torsional forces arise when one side of the bucket engages with the pile. The side panels maintain its shape – without them, the bucket would gradually distort.
Another point: The side edges come into contact with silo walls, masonry and bay dividers. This creates impact loads, not evenly distributed loads.
Suitable materials
- Wood chips and biomass
- Grain and cereals
- Silage and animal feed
- Manure and organic material
- Chippings and low-density bulk materials
- Compost and soil
The attachment interface – compatibility needs to be confirmed
This is what sets this product apart from standard accessories.
The manufacturer makes this clear: Before the order is placed, Customer Service will get in touch to determine the correct attachment interface.
Why this is necessary: Wheel loaders and telescopic handlers do not have a standardised attachment interface.
- Volvo, Kramer, Weidemann, Schäffer, JCB, Manitou – each has its own systems.
- Model ranges within a manufacturer also differ.
- Euro attachment interface is standard on front loaders, but not on wheel loaders.
What to provide when ordering: The manufacturer, model designation and year of manufacture of the carrier vehicle – ideally in the order comments field.
The advantage of this approach: The bucket will fit first time. A 750 kg implement with the wrong attachment interface would be costly and complicated to return.
Painted finish
The bucket is painted.
What this means: This is sufficient for wood chips, grain, soil and general bulk materials.
Where a galvanised finish would be better: for prolonged contact with silage, slurry or manure. Silage juice is acidic and attacks paint where it is scratched – and scratches are unavoidable during loading.
Applications
Farms, biogas plants, wood chip and biomass suppliers, agricultural contractors, animal feed suppliers, composting plants, storage and handling businesses, plant hire companies.
Operating instructions
- Specify the carrier vehicle when ordering – the attachment interface will be confirmed in advance.
- Check the rated tipping load and load chart – when filled, the bucket weighs between 1.700 and 3.500 kg, depending on the material.
- With a telescopic handler, check the lifting capacity at the actual reach.
- Use only for lightweight bulk materials – with gravel, sand and excavated material, the bucket will be overloaded before it is full.
- Check that the attachment is fully locked after every change.
- Guide the bucket flat rather than pushing it along the ground – this protects the floor and scraper blade.
- When filling high-sided containers, ensure the machine is stable and visibility is clear.
- Never stand beneath a raised bucket.
- Check the scraper blade regularly for wear; a blunt blade increases power requirements and the load on the loader.
- Check the floor reinforcements for wear.
- After use with silage, slurry or manure, clean the bucket – paint is less resistant than galvanising in these conditions.
Frequently asked questions
Will the bucket fit my loader?
The attachment interface will be confirmed before the order is placed. Please provide the manufacturer, model and year of manufacture of your carrier vehicle in the comments field – Customer Service will contact you about this.
What is the bucket’s capacity?
Approximately 3,70 m³, with a working width of 2.600 mm, depth of 1.570 mm and height of 1.310 mm.
Can I use it to load gravel or sand?
No. The bucket is designed for lightweight bulk materials. 3.7 m³ of gravel weighs approximately 6.700 kg – the bucket would be overloaded before it was full. Earthmoving buckets are the right choice for heavy materials.
How much does the bucket weigh when full?
Approximately 750 kg when empty. With wood chips, approximately 1.675 kg; with silage, approximately 3.340 kg; with grain, approximately 3.525 kg.
What does HB 500 mean?
A Brinell hardness of around 500 – about three times that of ordinary structural steel. The scraper blade measures 200 × 20 mm, providing a substantial wear allowance.
What are the floor reinforcements for?
They prevent the floor plate from wearing through. Once the plate has worn through, repairs are rarely worthwhile.
What does the spill guard do?
It prevents material from falling over the rear wall onto the machine when the bucket is raised – an especially pronounced effect with lightweight bulk materials.
Why is a large tipping angle important?
Lightweight and damp material sticks to the bucket walls. A large tipping angle ensures the bucket empties completely, without having to shake it repeatedly.
| Gerätetyp : | Schaufel |
|---|---|
| Working width: | 2.60m |
| volume: | 3700L |