Skip to main content Skip to search Skip to main navigation
Menu

FLIEGL Anbaukehrmaschine 2.800 mm, Walze Ø 600, 1 DW-Anschluss

Skip product gallery

Optionen

OPTION Fliegl spray system with 120 l tank for sweeper »Typ 500 und Typ 600« (Accessories 2800 mm)
Prod. no.: FAC-KEHFLI280806
Hersteller:

Regular price: €2,235.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl weed side brush Ø 600 mm with steel cable braids, mounted on the right for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000140
Hersteller:

Regular price: €1,251.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl weed side brush Ø 600 mm with flat wire segments, mounted on the right for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000125
Hersteller:

Regular price: €1,251.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl weed side brush Ø 600 mm with flat wire segments, mounted on the left for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000120
Hersteller:

Regular price: €1,251.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl weed side brush Ø 600 mm with steel cable braids, mounted on the left for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000145
Hersteller:

Regular price: €1,251.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl Euronorm mounting part with pendulum compensation, mechanically swivelling for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000060
Hersteller:

Regular price: €1,093.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl hydraulic swivel frame incl. control panel – surcharge for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000070
Hersteller:

Regular price: €1,006.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl dirt collection hopper 158 l with hydraulic emptying for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI280811
Hersteller:

Regular price: €962.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl forklift mounting part with pendulum compensation, mechanically swivelling for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000050
Hersteller:

Regular price: €810.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl support wheel set »Schwerlast« Ø 306 mm for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000160
Hersteller:

Regular price: €729.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl sweeper brush, mixed – with bristles made of plastic (thickness 2.7 mm) and steel (thickness 0.7 mm) – for Typ 600 for sweeper »Typ 500 und Typ 600« (Accessories 2800 mm)
Prod. no.: FAC-KEHFLI810280
Hersteller:

Regular price: €684.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl support wheel »Schwerlast« Ø 306 mm, front (required for mount with pendulum compensation) – Typ 600 for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000155
Hersteller:

Regular price: €549.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl three-point frame for front and rear mounting with three-point (Cat. 2) and tractor A-frame mount, mechanically swivelling for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI000000
Hersteller:

Regular price: €526.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl front reinforcement for 2800 mm version for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI280815
Hersteller:

Regular price: €378.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl spray system for side and weed brushes (only in combination with spray system with 85 l tank) for sweeper »PowerPro«
Prod. no.: FAC-KEHFLI000130
Hersteller:

Regular price: €369.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl splash guard (recommended for sweepers without dirt collection hopper) for sweeper »Typ 500 und Typ 600« (Accessories 2800 mm)
Prod. no.: FAC-KEHFLI900564
Hersteller:

Regular price: €351.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl LED marker lights 12 V / 24 V, fitted for sweeper »Typ 500 und Typ 600«
Prod. no.: FAC-KEHFLI900090-3
Hersteller:

Regular price: €297.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Equipment

  • Sweeping roller Ø 600 mm, infinitely adjustable
  • Internally mounted hydraulic motor
  • Robust machine housing
  • Debris collection hopper
  • Free-sweeping mode as standard
  • 2 adjustable rear support wheels, Ø 306 mm
  • Mechanically swivels approx. 30° to either side

Technical data

ManufacturerFLIEGL
Product typeHydraulically driven mounted sweeper
Working width2.800 mm
Sweeping roller diameterØ 600 mm
Roller adjustmentinfinitely adjustable
Swivel rangeapprox. 30° to either side, mechanical
Support wheels2 rear wheels, Ø 306 mm, adjustable
Required oil flow30 – 80 l/min
Required connections1 × double-acting
Driveinternally mounted hydraulic motor
Brushesindividual disc brushes, plastic bristles
Free-sweeping modestandard, via shut-off valve

Product description

Mounted sweeper for heavily soiled surfaces

The machine sweeps a width of 2.800 mm and is designed for use on heavily soiled surfaces. Heavy-duty support wheels ensure optimum guidance, even on uneven ground.

The internally mounted hydraulic motor – the key feature

The manufacturer specifically highlights two benefits: excellent protection against damage and sweeping close to edges.

Why the motor position affects service life: With an externally mounted motor, the machine’s most expensive component is in its most exposed position.

  • Kerbs are inevitably touched when sweeping along edges.
  • Posts, walls and ramps are right where the sweeping takes place.
  • A damaged hydraulic motor means downtime and a substantial repair bill.

The second benefit is more important in practice: Without a motor protruding at the side, the sweeping roller reaches the outer edge. This makes it possible to sweep right up to the kerb – exactly where dirt accumulates.

With an externally mounted motor, an unswept strip remains, which has to be cleaned by hand or in a second pass.

Free-sweeping mode – two machines in one

Sweeping with the debris collection hopper open is included as standard – activated by operating a shut-off valve.

Operating modeHopperApplication
Collection sweepingclosedCollect debris and empty it at a designated point
Free sweepingopenMove material to the side or forwards

When free sweeping is the better choice:

  • Large quantities of debris. A full hopper after just a few metres is more of a hindrance than a help.
  • Coarse material – leaves, crop residues, clods of earth, silage residues.
  • Wet material, which sticks to the hopper.
  • Material that is intended to be deposited at the side anyway – for example, snow or earth on a farm track.

Why use a shut-off valve rather than a second spool valve: Switching is done hydraulically via the existing circuit. No additional connection or hose is needed.

One double-acting connection is sufficient

A double-acting connection is required for the drive and functions.

Why this determines the range of applications: Many yard loaders, telehandlers and older tractors have only one or two auxiliary circuits. A machine that uses two or three circuits will not be suitable – regardless of whether there is sufficient power.

The second benefit: Fewer couplings mean quicker changes and fewer potential leak points.

Sweeping roller Ø 600 mm – why diameter matters

This is a large roller.

  • Higher peripheral speed at the same rotational speed – more energy at the tip of the bristles.
  • Longer service life. The bristles wear down; with a larger diameter, more usable length remains for longer.
  • Larger contact area with the ground – resulting in a more even sweeping pattern.
  • Better movement of material over the edge of the hopper.

The manufacturer also points out: The brushes can be used right up to the wear limit. On many machines, sweeping performance declines well before the actual wear limit is reached, because the contact pressure cannot be adjusted.

The infinitely adjustable sweeping roller

The height adjustment solves exactly this problem.

Why contact pressure determines the result:

  • Too little pressure: The bristles barely touch the ground – fine dirt is left behind.
  • Too much pressure: The bristles bend, the roller slows down and wear increases sharply.
  • Correctly adjusted: The bristles sweep the ground with a defined pressure.

What the infinitely variable adjustment also does: It compensates for wear. As the bristles get shorter, the roller is lowered – keeping sweeping performance constant right to the end.

The support wheels – Ø 306 mm, adjustable

Two heavy-duty wheels guide the machine at the rear.

What they do: They keep the roller at a constant height above the ground – regardless of the boom position or vehicle angle.

Why this is essential on uneven ground: Without ground guidance, the driver would have to constantly readjust the height. This is practically impossible on farmyards with slopes, drains and depressions – the roller either hits the ground or lifts off.

The large 306 mm diameter rolls over edges, joints and gravel instead of getting caught on them.

The adjustability allows the setting to be adapted to roller wear and ground conditions.

Swivels 30° to either side

The machine can be angled mechanically.

What this is used for: The swivel angle determines where the material goes.

  • Straight – move material forwards or into the hopper.
  • Angled – continuously move material to the side in free-sweeping mode.
  • Changing direction – direct material to the correct side on both the outward and return passes along the same track.

Why it swivels both ways: When sweeping along a wall or kerb, the material needs to be directed towards the open side. On the return pass, that is the other side.

The cranked side brushes

According to the manufacturer, they provide optimum road cleaning.

What “cranked” means: The brush arm is angled. This allows the side brush to extend beyond the width of the machine and reach areas the main roller cannot.

What this is used for: Kerbs, gutters, drain edges and the base of walls. Dirt accumulates there – and a straight roller cannot reach those areas.

The cranked shape has a second benefit: The brush can skim along the edge without the machine itself hitting it.

Plastic bristles in individual disc brushes

The brush assembly consists of individual discs.

Why use individual discs instead of one continuous brush:

  • Targeted replacement. Areas subject to greater wear can be replaced individually – not the entire roller.
  • Adaptable configuration. The density can be changed to suit the application.
  • Lower spare part costs over the service life.

Plastic bristles are the popular choice for paved surfaces – they sweep thoroughly without damaging the surface. For highly abrasive material and weed removal, steel or mixed brushes are the alternative.

2.800 mm working width – area coverage

The width determines how quickly an area is cleaned.

An example calculation: At a working width of 2.8 m and a speed of 5 km/h, the machine theoretically covers 14,000 m² per hour. In practice, output is lower due to turning time, overlap and emptying – but the figures show why working width is the decisive factor.

Please note: When angled, a 2.8 m machine has an effective sweeping width of around 2.4 m. The overall width is also the key measurement for road transport.

Hydraulic requirements

The drive requires 30 to 80 l/min.

What this wide range means: The machine is compatible with carrier vehicles with different specifications – from smaller yard loaders to powerful tractors.

What to check before ordering:

  • At least 30 l/min must be supplied continuously by the auxiliary circuit.
  • No more than 80 l/min – excessive flow will overload the hydraulic motor.
  • The return line must be adequately sized – back pressure can damage the motor.

For carrier vehicles with a flow rate above 80 l/min, a flow control valve is required.

Applications

Farms and farmyards, biogas plants and silage clamps, local authorities and depots, road cleaning, construction sites and site access roads, commercial and logistics areas, agricultural contractors, equestrian facilities, winter maintenance.

Operating instructions

  • Check the hydraulics: 30 to 80 l/min – below this, the roller turns too slowly; above it, the hydraulic motor will be overloaded.
  • Ensure the return line is adequately sized.
  • Choose a mounting to suit the carrier vehicle.
  • Set the roller contact pressure correctly – excessive pressure doubles wear without improving the result.
  • Readjust the roller as it wears.
  • Choose a swivel angle that directs the material towards the open side.
  • Regularly check that the support wheels turn freely and that their running surfaces are clear.
  • In free-sweeping mode, keep an eye on the discharge area – stones may be thrown out.
  • Do not enter the working area.
  • When working on public roads, follow the requirements for securing the work site.
  • When travelling on roads, comply with the requirements for lighting, marking and permitted dimensions.
  • Watch out for manhole covers, drainage channels and road markings.
  • Dry swept material creates dust – be considerate of neighbours and open windows; a water system reduces dust.
  • Dispose of swept material properly.
  • Depressurise the hydraulics before maintenance and secure the machine against accidental lowering.

Frequently asked questions

How wide does the machine sweep?

2.800 mm. When angled, the effective sweeping width is reduced according to the selected swivel angle.

How many hydraulic connections do I need?

One double-acting connection. An oil flow of 30 to 80 l/min is required.

What is free-sweeping mode?

Sweeping with the debris collection hopper open – switched via a shut-off valve. Material is moved to the side rather than collected. Useful for large quantities of debris, or coarse or wet material.

Why is the hydraulic motor mounted internally?

For two reasons: it is protected from damage caused by kerbs and obstacles, and the sweeping roller reaches the outer edge, making it possible to sweep close to edges.

Can the roller be adjusted?

Yes, it is infinitely adjustable. This allows the contact pressure to be adapted to the ground and readjusted as wear increases – the brushes can be used right up to the wear limit.

What are the support wheels for?

They keep the roller at a constant height above the ground, regardless of the vehicle angle or boom position. With a diameter of Ø 306 mm, they roll over edges and joints.

How far does the machine swivel?

It swivels mechanically by approx. 30° to either side. This directs the material to the correct side on both the outward and return passes.

What do the cranked side brushes do?

The angled arm extends beyond the width of the machine and reaches kerbs, gutters and the base of walls – exactly where dirt accumulates.