Enorossi Sternradschwader 9,40 m, 16 Räder, Rubberflex, Lenkachse
€22,500.00
Scope of delivery
- 1 × star-wheel rake with V-frame construction and rear articulation, semi-mounted
- 16 star wheels Ø 1.50 m with Rubberflex tines (short, robust tines)
- Hydraulic lifting and working-width adjustment
- Rake-arm ground pressure control
- Individually sprung arms for ground contour following
- Damped, trailing gauge wheels
- Automatic steering (90° steering angle)
- Operating instructions in German, CE declaration of conformity
Not included in the scope of delivery: hydraulic braking system, wind guard (ABS discs), centre wheel set, tandem axle, spare wheel set.
Please note: With a machine weight of around 2,400 kg, the braking system and road approval should be clarified before ordering. We will be happy to do this for you.
Technical data
| Type | Star-wheel rake, V-frame with rear articulation |
|---|---|
| Mounting type | semi-mounted (drawbar at front, gauge wheels at rear) |
| Working width | approx. 9.40 m |
| Number of star wheels | 16 (8 per side) |
| Star-wheel diameter | 1.50 m |
| Tine design | Rubberflex, short, robust tines |
| Swath width | 1.0–1.4 m, mechanically adjustable in 4 stages |
| Star-wheel drive | Ground-driven – no PTO required |
| Steering | automatic steering, 90° steering angle |
| Hydraulic connections | 1 × single-acting, 1 × double-acting |
| Transport width | approx. 2.99 m |
| Transport length | approx. 10.30 m |
| Weight | approx. 2,400 kg |
Product description
This star-wheel rake forms a swath across a 9.40 m working width and requires no PTO: the 16 star wheels, each 1.50 m in diameter, are driven by the ground. Its semi-mounted design, automatic steering and 90° steering angle make it manoeuvrable at the headland, while its 10.30 m transport length makes it considerably more manageable than the larger models in the same range.
What the Rubberflex version is – and what we still don't know about it
This machine is fitted with Rubberflex tines: short, robust tines instead of the long spring-steel tines used in the standard version. The mechanical implications are clear:
- Short tines are more likely to avoid uneven ground and stones than long spring-steel tines. This is an advantage on fields with molehills or stones, or after wild boar have rooted around.
- Short tines do not reach as far into the stubble. When handling a short second cut and fine material, the standard version with long tines picks up more.
And now for the part others leave out: we have no manufacturer data on the service life, breakage behaviour or forage cleanliness of Rubberflex tines, and user experiences with rubber tines on star-wheel rakes vary – from longer service life to tines breaking off in the forage. So we make no claims about these points.
If you need to choose between Rubberflex and steel tines, talk to us. We will obtain the manufacturer's information on tine length, material and recommended use, then advise you on the right version for your fields and crop. That's more honest than listing benefits we cannot substantiate.
9.40 m without a PTO: what that means in practice
The star-wheel rake is the fastest swathing machine available – because it is not tied to a PTO speed:
| Calculated at 10 km/h | 9.4 ha/h |
|---|---|
| Calculated at 15 km/h | 14.1 ha/h |
| In practice, with 80% field efficiency | 7.5 to 11.3 ha/h |
These figures are our calculations based on working width and forward speed, not manufacturer specifications. By comparison, a rotary rake of the same working width costs several times more and works at a lower speed. A 9.40 m working width produces a swath 1.0 to 1.4 m wide – a combining ratio of around 7:1 to 9:1. Set the swath width to match the pick-up on your baler or forage wagon, rather than judging it by eye.
The honest side: ground contact, crude ash and the limits of this model size
A star-wheel rake works in contact with the ground – this is how it is driven. That is both its advantage (no gearbox, no drive train, very few wear parts, high working speed) and its risk: tines set too low scrape soil, molehills and stones into the forage. Every centimetre too low increases the crude ash content, and soil brings clostridia into the silage.
Three standard features help prevent this:
- Ground pressure control: Adjust the pressure so that the tines guide the forage, not the ground. As a starting point, set the tine tips around 2 to 3 cm above the ground.
- Individually sprung arms: Each arm follows the ground contour independently.
- Damped gauge wheels: They maintain the height even at higher forward speeds.
We will also be clear about what this model size does not have: The ERS 16 ST is the entry-level model in the range. Unlike models with 18 or more star wheels, it has no articulated frame, no articulated swath arm and no reinforced structure. This is not a problem on even ground. On very uneven ground, the next larger version is the better machine, even if a 9.40 m working width would be sufficient for you – because its frame moves with the ground, rather than relying on the gauge wheels alone. Tell us what your fields are like and we will give you an honest recommendation on the right model size.
Star-wheel rake or rotary rake?
| Criterion | Star-wheel rake (this machine) | Rotary rake |
|---|---|---|
| Drive | Ground-driven, no PTO | PTO, gearbox, drive train |
| Forward speed | high (10 to 15 km/h) | limited by rotor speed |
| Wear and maintenance parts | very few, no oil changes on the drive | gearbox, rotor bearings, cam track |
| Purchase price at the same working width | considerably lower | considerably higher |
| Forage cleanliness | highly dependent on adjustment | more consistent with gauge-wheel guidance |
| Wet, heavy grass | limited suitability | the rotary rake's strength |
| Hay, straw, lucerne | the star-wheel rake's strength | more leaf shatter from throwing |
Straw: where 9.40 m is particularly well suited
The star-wheel rake is the classic machine for straw behind a combine harvester, and 9.40 m is a practical working width here: it lets you combine the straw swath from a 9 m combine harvester, including the spread at the edges, into one swath, or cover one and a half passes of a 6 m combine. Match the working width to your harvesting width – this saves a complete pass and is where the machine pays for itself fastest.
Transport and road travel – more manageable than the larger models
Automatic steering with a 90° steering angle makes the machine manoeuvrable at the headland; it follows the tractor rather than forcing it. There are three points to check for road travel:
- Transport width around 2.99 m. Section 32 of the German Road Traffic Licensing Regulations (StVZO) permits agricultural and forestry implements up to 3.00 m wide – this machine is within the limit, but with no margin, and warning boards and marker lights are required above 2.55 m.
- Transport length around 10.30 m. With a tractor, the total length is around 15 m. This is considerably more manageable than the larger models in the range, but check farm entrances and routes through villages beforehand.
- Braking system. At around 2,400 kg, Enorossi offers a hydraulic braking system as an accessory. We recommend ordering it and will be happy to clarify the operating permit requirements in advance.
Frequently asked questions
What are the benefits of Rubberflex tines compared with steel tines?
What we can confirm is that they are short, robust tines rather than long spring-steel tines. Mechanically, this means they are more likely to avoid uneven ground and stones, but they also do not reach as far into the stubble – the steel version picks up more when handling short, fine material. We have no manufacturer data on service life, breakage behaviour or forage cleanliness, and user experiences with rubber tines vary. So we make no claims about these points. Talk to us and we will obtain the manufacturer's information and advise you based on your fields.
Does the star-wheel rake need a PTO?
No. The star wheels are ground-driven, so there is no PTO drive or gearbox. Your tractor needs one single-acting and one double-acting hydraulic connection. Any figures for PTO power that you may occasionally see quoted for this machine are misleading.
What tractor do I need?
The key factor is not engine power, but the weight of around 2,400 kg in a semi-mounted configuration: the tractor must support the drawbar load and keep the combination stable on the road and on slopes. In our assessment, this means tractors from around 70 to 80 hp. We will request a definitive figure from the manufacturer – tell us which tractor you have and we will check its lifting capacity and drawbar load for you.
How much area can I cover in an hour?
At a working width of 9.40 m and a speed of 10 to 15 km/h, the theoretical output is between 9.4 and 14.1 ha/h. With a realistic field efficiency of 80%, this comes to 7.5 to 11.3 ha/h. Use this figure when calculating quotations and machinery costs.
How can I prevent soil getting into the forage?
Use the ground pressure control, which is included as standard. Adjust the pressure so that the tine tips work around 2 to 3 cm above the ground and guide the forage instead of scraping the soil. The individually sprung arms and damped gauge wheels maintain this height even at higher forward speeds. Every centimetre too low increases the crude ash content and introduces clostridia into the silage.
How does this model size differ from the larger ones?
It is about more than working width. Models with 18 or more star wheels also have an articulated frame, an articulated swath arm and a reinforced structure; this version does not. This makes no difference on even ground, but it does on very uneven terrain, where an articulated frame follows the contours better. Tell us what your fields are like and we will advise you.
How wide is the swath?
1.0 to 1.4 m, mechanically adjustable in four stages. Set the swath width to match the pick-up width of your baler or forage wagon. This gives a combining ratio of around 7:1 to 9:1 from a working width of 9.40 m.
Can I drive the machine on the road?
The transport width of around 2.99 m is within the 3.00 m permitted for agricultural and forestry implements under Section 32 of the German Road Traffic Licensing Regulations (StVZO); warning boards and marker lights are required above 2.55 m. The transport length is around 10.30 m, or about 15 m with a tractor. Together with the braking system, these are three points we will be happy to clarify with you before you order.
| Anzahl Kreisel / Sternräder: | 16 |
|---|---|
| Cultivation method: | gezogen |
| Gerätetyp : | Schwader |
| Kraftbedarf: | ab 100PS |
| Working width: | 9,40m |