Skip to main content Skip to search Skip to main navigation
Menu

Enorossi Sternradschwader 12,10 m, 22 Sternräder, Lenkachse

Skip product gallery

Optionen

Enorossi EU-Straßenzulassung - passend zu EASY RAKE SUPERSTAR
Prod. no.: ENO-18038214
Hersteller:

Regular price: €900.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Enorossi Hydraulische Bremse - passend zu EASY RAKE SUPERSTAR
Prod. no.: ENO-18036264
Hersteller:

Regular price: €1,687.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Scope of delivery

  • 1 × star-wheel rake in V-frame design with rear articulation, semi-mounted
  • 22 star wheels Ø 1.50 m, tine thickness 7.5 mm, 40 tines each
  • Hydraulic lifting and hydraulic working width adjustment
  • Ground pressure adjustment for the rake arms
  • Individually sprung arms for ground contour following
  • Articulated frame and articulated rake arm
  • Damped, trailing gauge wheels
  • Automatic steering (90° steering angle)
  • Reinforced frame construction
  • Operating instructions in German, CE Declaration of Conformity

Not included in the scope of delivery: hydraulic braking system, wind guard (ABS discs), centre wheel set, tandem axle, spare wheel set, Rubberflex star wheels.

Please note: With a machine weight of around 3.65 t, the braking system and road approval should be clarified before ordering. We can take care of this for you – contact us before placing your order.

Technical data

DesignStar-wheel rake, V-frame with rear articulation, central swath deposition
Mounting typesemi-mounted (drawbar at front, gauge wheels at rear)
Working widthup to 12.10 m, hydraulically adjustable
Number of star wheels22 (11 per side)
Star wheel diameter1.50 m
Tines per star wheel40
Total number of tines880
Tine thickness7.5 mm
Swath width1.0–1.4 m, mechanically adjustable in 4 stages
Star wheel driveGround-driven – no PTO required
Steeringautomatic steering, 90° steering angle
Hydraulic connections1 × single-acting, 1 × double-acting
Tractor powerfrom approx. 100 hp (74 kW) – for pulling, lifting capacity and driving stability
Transport widthapprox. 2.99 m
Transport lengthapprox. 13.1 m
Weightapprox. 3,650 kg

Product description

This star-wheel rake forms a central swath across a 12.10 m working width and requires no PTO: the 22 star wheels, each 1.50 m in diameter, are ground-driven. The V-frame with rear articulation, semi-mounted design and automatic steering with a 90° steering angle make this 12 m-wide machine practical to manoeuvre even at the headland.

What 12.10 m means per hour

The star-wheel rake is the fastest type of rake available – not because it has greater capacity, but because it is not tied to a PTO drive at high forward speeds. The figures:

Theoretical at 10 km/h12.1 ha/h
Theoretical at 15 km/h18.2 ha/h
In practice, at 80% field efficiency9.7 to 14.5 ha/h

Use the last figure for your calculations. These figures are our calculations based on working width and forward speed, not manufacturer specifications – but they are figures you can use for planning. By comparison, a rotary rake of the same working width costs several times as much and operates more slowly.

A 12.10 m working width is brought together into a 1.0 to 1.4 m swath – a consolidation ratio of around 9:1 to 12:1. This is exactly the swath size a large square baler or forage wagon with a wide pick-up needs to operate at full capacity continuously. Set the swath width to suit your pick-up, not by eye: a swath that is too narrow feeds the baler unevenly, while one that is too wide starves it of crop.

880 tines, 118 mm spacing – why this determines how cleanly it works

22 star wheels with 40 tines each give a total of 880 tines. A wheel with a diameter of 1.50 m has a circumference of 4.71 m, so the tine spacing around the wheel is approximately 118 mm. This is what determines how much short and fine material is actually picked up – every centimetre less spacing counts when handling lucerne leaves and a short second cut.

The 7.5 mm tine thickness is robust for this class. Alternatively, Enorossi offers Rubberflex star wheels with short, robust teeth – these are less susceptible to ground contact and foreign objects and do not lose tines, but they work less delicately. Contact us if you mainly rake straw or stony ground.

The honest truth: ground contact and crude ash

A star-wheel rake works in contact with the ground – that is precisely how it is driven. This is its advantage (no gearbox, no drive train, very few wear parts, high speed) and also its risk: Tines set too low scrape soil, molehills and stones into the forage. Every centimetre too low increases the crude ash content, and soil brings clostridia into the silage – with all the consequences for fermentation quality and butyric acid.

If you have used a double-blade mower to achieve clean cut surfaces and low crude ash, you can lose that advantage in a single pass with an incorrectly adjusted rake. That is why these three components are included as standard and should be used:

  • Ground pressure adjustment: Set the pressure so that the tines guide the forage, not the ground. As a starting point, set the tine tips around 2 to 3 cm above the ground.
  • Individually sprung arms: Each arm follows the ground contour independently, rather than the whole frame riding over the highest point.
  • Damped gauge wheels: They maintain the height even at higher forward speeds and prevent the wheels from dropping into hollows.

On undulating ground, where there are many molehills, or with wet, heavy grass, a rotary rake is the cleaner option. For hay, straw, lucerne and large areas, the star-wheel rake clearly outperforms it in terms of capacity and cost.

Star-wheel rake or rotary rake?

CriterionStar-wheel rake (this machine)Rotary rake
DriveGround-driven, no PTOPTO, gearbox, drive train
Forward speedhigh (10 to 15 km/h)limited by rotor speed
Wear and maintenance partsvery few, no oil changes to the drivegearbox, rotor bearings, cam track, tine arms
Purchase price at the same working widthconsiderably lowerconsiderably higher
Forage cleanlinesshighly dependent on adjustmentmore consistent with gauge wheel guidance
Wet, heavy grasslimited – crop tends to be rolledthe rotary rake's strength
Hay, straw, lucernethe star-wheel rake's strengthgreater leaf loss from throwing
Uneven groundhigher risk of contaminationmore robust on uneven ground

Straw: where this working width is just right

For straw behind the combine harvester, the star-wheel rake is the classic choice, and 12.10 m is no arbitrary figure here: at this width, you can combine two passes from a 6 m combine harvester into one swath, or one 9 m pass together with the spread edge. Match the working width to your harvesting width – this saves an entire pass and is where the machine pays for itself fastest.

Transport and road travel – something to clarify beforehand

The automatic steering with a 90° steering angle makes the machine manoeuvrable in the field and at the headland; it follows the tractor rather than forcing it. For road travel, however, there are two dimensions you should check before buying:

  • Transport width approx. 2.99 m. § 32 StVZO permits agricultural and forestry implements up to 3.00 m wide – this fits, but leaves no margin. Above 2.55 m, marking requirements apply, including warning boards and marker lights.
  • Transport length approx. 13.1 m. With a tractor around 5 m long, the overall length of the combination is around 18 m. In practice, this is a greater limitation than the width: check farm entrances, routes through villages and turning options beforehand.
  • Braking system. At around 3.65 t, Enorossi offers a hydraulic braking system as an accessory. We recommend ordering it from the outset, and would be happy to clarify the operating permit for road use with the manufacturer in advance.

Contact us about these three points before ordering. A machine that works perfectly in the field but cannot get there is no use to anyone.

Frequently asked questions

Does the star-wheel rake need a PTO?

No. The star wheels are ground-driven; there is no PTO drive or gearbox. Your tractor needs one single-acting and one double-acting hydraulic connection. The occasionally quoted figure of 100 hp PTO power is misleading – tractor power is needed for pulling, lifting capacity and driving stability, not for a drive system.

What tractor do I need?

We recommend a tractor with around 100 hp or more, equivalent to 74 kW. The key factor is not engine power, but the weight of the semi-mounted machine, at around 3.65 t: the tractor must carry the drawbar load and keep the combination stable on the road and on slopes. A light tractor with nominally sufficient power is the wrong choice here.

How much ground can I cover per hour?

Theoretically, a 12.10 m working width at 10 to 15 km/h gives between 12.1 and 18.2 ha/h. With a realistic field efficiency of 80%, this comes to 9.7 to 14.5 ha/h. Use this figure when comparing quotes and calculating machinery costs.

How do I prevent soil getting into the forage?

Use the ground pressure adjustment, which is included as standard. Set the pressure so that the tine tips work around 2 to 3 cm above the ground and guide the forage rather than scraping the soil. The individually sprung arms and damped gauge wheels maintain this height even at higher forward speeds. Every centimetre too low increases the crude ash content and introduces clostridia into the silage.

Is a star-wheel rake worse than a rotary rake?

No, it is built for different conditions. For hay, straw, lucerne and large areas, it is clearly superior in terms of capacity, purchase price and maintenance, and treats dry forage more gently because it rolls rather than throws it. A rotary rake works more cleanly with wet, heavy grass and on undulating ground with many molehills. Tell us what you mainly harvest and we will advise you on the right machine.

How wide is the swath?

1.0 to 1.4 m, mechanically adjustable in four stages. Set the swath width to match the pick-up width of your baler or forage wagon. This gives a consolidation ratio of around 9:1 to 12:1 from a 12.10 m working width.

How many tines does the machine have?

880 tines: 22 star wheels with 40 tines each, with a tine thickness of 7.5 mm. The tine spacing around the wheel is approximately 118 mm – this determines how much short and fine material is actually picked up. Rubberflex star wheels with short, robust teeth are available as an alternative.

Can I drive the machine on the road?

The transport width of around 2.99 m is within the 3.00 m permitted for agricultural and forestry implements under § 32 StVZO; above 2.55 m, warning boards and marker lights are required. More significant is the transport length of around 13.1 m, which brings the overall length with the tractor close to 18 m. Together with the braking system, these are three points we would be happy to clarify with you and the manufacturer before you order.

Properties
Anzahl Kreisel / Sternräder: 22
Cultivation method: gezogen
Gerätetyp : Schwader
Kraftbedarf: ab 100PS
Working width: 12,10m