Skip to main content Skip to search Skip to main navigation
Menu

Enorossi Kreiselheuer VORTEX G2-310 gezogen, 2-Rotor, 310 cm Arbeitsbreite

Description

Scope of delivery

  • 1 × Enorossi VORTEX G2-310 rotary tedder trailed (PTH)
  • 2 rotors, each with 6 tine arms
  • Drawbar with trailer coupling
  • Support wheels with 15x6.00-6 tyres
  • Mechanical working width adjustment
  • Mechanical spreading angle adjustment
  • Mechanical tine height adjustment
  • PTO shaft (please confirm scope of delivery with the manufacturer)

Technical data

ManufacturerEnorossi (Enoagricola Rossi S.r.l.)
ModelVORTEX G2-310 PTH
TypeRotary tedder / rotary hay tedder, trailed
Mounting typeTrailed (Pull-Type Hitch / PTH)
Rotors and tines
Number of rotors2
Tine arms per rotor6
Number of tines per armplease request from the manufacturer
Dimensions
Working width310 cm
Transport width320 cm
Transport length230 cm
Transport height110 cm
Weight and drive
Weightapprox. 195 kg
Minimum tractor power15 kW / 20 PS
PTO speed540 min&supmin;¹ (please confirm)
Tyres15x6.00-6

Product description

Who this rotary tedder is designed for

The Enorossi VORTEX G2-310 in the trailed version (PTH) is a compact 2-rotor rotary tedder for small and medium-sized grassland farms. With a minimum power requirement of just 15 kW (20 PS), this hay tedder is suitable for compact tractors, narrow-track tractors and older standard tractors – machines used on part-time farms, in equestrian operations, for municipal grass cutting and on hobby farms.

A 310 cm working width is the entry-level size for serious haymaking: wide enough to turn a mower swath in one pass, yet narrow enough for farm tracks and small fields. Those working larger areas will need the VORTEX G4-420 (4 rotors, 420 cm) or the G6-740 PROFILINE (6 rotors, 740 cm).

Trailed (PTH) vs. mounted (3PH) – why the difference matters

Enorossi offers the VORTEX G2-310 with two mounting types: as a three-point linkage implement (3PH) and as a trailed implement (PTH – Pull-Type Hitch). The PTH version is guided by a drawbar attached to the tractor’s trailer coupling or towing hitch, rather than being mounted on the three-point linkage. This has three practical consequences:

VORTEX G2-310: PTH vs. 3PH compared
FeaturePTH (trailed)3PH (mounted)
Transport width320 cm250 cm
Transport height110 cm180 cm
Transport length230 cm–
Weightapprox. 195 kgapprox. 190 kg
Ground followingeven (support wheels)depends on top link adjustment
Linkage free?yes – front loader, front mower, etc. can be usedno – occupied

The key difference is transport height: 110 cm instead of 180 cm. On farms with low gateways, barn passages or storage sheds, this is the difference between “fits through” and “tears off the gutter”. However, the PTH version is wider in transport (320 cm vs. 250 cm), which matters on narrow roads.

A second advantage: The rear linkage remains free. If you are using a front mower or front loader at the same time, you can still hitch up the rotary tedder – this is not possible with the 3PH version.

12 tine arms, one goal: an even spread pattern

Each rotor carries 6 tine arms – 12 in total. The tine arms lift, turn and spread the crop evenly across the full working width. Three adjustments determine the spread pattern:

  • Spreading angle: Determines how far the forage is thrown sideways. A steeper angle means a narrower, higher swath; a shallower angle means a wider, thinner spread.
  • Tine height: The distance between the tine tips and the ground. Too low and soil gets into the forage; too high and forage is left behind. The correct height depends on the sward and the soil moisture content.
  • Working width: The effective spreading width can be adjusted to suit the crop – narrower for a light aftermath cut, wider for a heavy first cut.

All three adjustments are mechanical. This keeps the rotary tedder simple and easy to repair – no hydraulic hose, no valve and no tractor control valve requirement. If you need hydraulic adjustment, you will need to look further up the VORTEX range.

195 kg – what this means for the tractor

The VORTEX G2-310 PTH weighs approx. 195 kg. This is at the lower end for a rotary tedder in the 3-metre class. For comparison, competing machines with a similar working width typically weigh 200–280 kg.

The low weight has three advantages:

  • Sward: Less ground pressure from the support wheels and tines means less damage to the sward, especially on wet permanent grassland.
  • Fuel: Less rolling resistance and lower drawbar pull required.
  • Tractor compatibility: Even light tractors from 20 PS upwards can tow the implement safely without overloading the rear axle with the drawbar load.

Where the G2-310 fits in the VORTEX family

Overview of the Enorossi VORTEX range
ModelRotorsWorking widthMinimum powerMounting type
G2-3102310 cm15 kW / 20 PS3PH or PTH
G4-4204420 cmapprox. 25 kW / 34 PS3PH or PTH
G6-5206520 cmapprox. 30 kW / 40 PS3PH or PTH
G6-6206620 cmapprox. 35 kW / 48 PSPTH
G6-740 PROFILINE6740 cmapprox. 40 kW / 55 PSPTH

The logic is simple: G + number of rotors + working width in cm. The G2-310 is the entry-level model for small areas. For twice the area, choose the G4-420. For large-scale haymaking, you need the G6-740 PROFILINE – with an oil-bath gearbox, hydraulic rotor folding and warning lights as standard.

What the G2-310 PTH does not have – and why

The compact 2-rotor design is deliberately simple:

  • No hydraulic adjustment: The spreading angle, tine height and working width are adjusted mechanically. This saves a double-acting control valve on the tractor and reduces potential faults, but means adjustments can only be made when stationary, not from the driver’s seat.
  • No hydraulic rotor folding: On the PROFILINE range (G6-740), the rotors fold hydraulically for road transport. This feature is not included on the G2-310 – with two rotors, its 320 cm transport width is already narrow enough for most farm tracks.
  • No warning lights as standard: Lighting and warning boards are standard equipment on the larger VORTEX models. On the G2-310, they must be retrofitted or ordered separately if required for road transport.

If you need hydraulic adjustment or rotor folding from the driver’s seat, you will need to look further up the range – but this also increases the tractor’s minimum power requirement.

Frequently asked questions

What does “trailed (PTH)” mean on the Enorossi VORTEX G2-310?

PTH stands for Pull-Type Hitch. The rotary tedder is not mounted on the three-point linkage, but is towed via a drawbar attached to the tractor’s trailer coupling or towing hitch. The main advantage is that transport height is reduced to just 110 cm (instead of 180 cm for the three-point version), and the rear linkage remains free for other implements. The trade-off is that the PTH version is 70 cm wider in transport (320 cm vs. 250 cm).

What tractor power is required for the VORTEX G2-310 PTH?

Enorossi specifies a minimum power of 15 kW or 20 PS at the PTO. This is sufficient to drive the two rotors. In practice, the tractor should be heavy enough to safely support the drawbar load – a tractor weighing less than 1,000 kg will become unstable at full speed. The PTO speed is expected to be 540 min&supmin;¹ – please confirm with your dealer.

What is the working width of the VORTEX G2-310 compared with other VORTEX models?

The VORTEX G2-310 has a working width of 310 cm and, with 2 rotors, is the most compact model in the VORTEX range. The next-largest VORTEX G4-420 works with 4 rotors across a width of 420 cm, while the VORTEX G6-740 PROFILINE has 6 rotors and a width of 740 cm. The model designation indicates the working width: the number after the hyphen is the width in centimetres.

Can the VORTEX G2-310 PTH also be used on small or uneven areas?

Yes – this is one of its strengths. The trailed design with support wheels follows uneven ground better than an implement rigidly mounted on the linkage, as the wheels maintain the distance from the ground. Its low weight of just 195 kg helps protect the sward. The compact transport dimensions (320 × 230 × 110 cm) allow access along narrow farm tracks and through low gateways.

Do I need a hydraulic connection on the tractor for the VORTEX G2-310 PTH?

This is not clearly documented. The mechanical adjustments (spreading angle, tine height and working width) do not require a hydraulic connection. Whether the implement is raised hydraulically at the headland or mechanically via the drawbar depends on the exact equipment variant. Please check with your dealer whether a double-acting control valve is required.

Properties
Cultivation method: gezogen
Gerätetyp : Kreiselheuer
Kraftbedarf: ab 20PS
Working width: 3,10m