Skip to main content Skip to search Skip to main navigation
Menu

ENOROSSI Double-Action-Mähwerk 1,65 m, Heckanbau, ab 35 PS

Skip product gallery

Zubehör

Enorossi Mechanische Aushebung BFS - passend zu BFS 165, BFS 180
Prod. no.: ENO-17310005
Hersteller:

Regular price: €229.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Enorossi Hydraulische Aushebung BFS - passend zu BFS 165, BFS 180
Prod. no.: ENO-18031301
Hersteller:

Regular price: €378.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Enorossi Hochschnittkufen 6 cm (4 Stück) - passend zu BFT 135, BFT 150, BFS 165, BFS 180, BFF 270H, BFF-DL 270H
Prod. no.: ENO-18038160
Hersteller:

Regular price: €225.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Scope of delivery

  • 1 × Double-Action mower with 1.65 m working width, rear-mounted
  • Mechanical or hydraulic lift, depending on the version selected
  • Mechanical safety device that trips on contact with an obstacle
  • Anti-flutter tie rod
  • Compensation springs
  • Swath former
  • PTO shaft
  • Complete replacement blade
  • Blade guard for transport and storage

Technical data

ManufacturerEnorossi (Enoagricola Rossi)
TypeMower with Double-Action cutter bar (scissor cut, upper blade and counter-blade move in opposite directions)
MountingRear-mounted, three-point linkage Cat. I and II
Working width165 cm
Power requirementfrom 35 hp
Weightapprox. 256 kg without lift, approx. 267 kg with mechanical lift, approx. 272 kg with hydraulic lift
Liftmechanical or hydraulic
DrivePTO via PTO shaft, three-belt drive with belt tensioning spring
Working speed8–12 km/h
Min. cutting height3 cm
Bladesindividually replaceable
Guardsbolted on
Overload protectionmechanical safety device
Cutter bar working range+90° to −45°
Cutter bar guidanceSkid, adjustable to three positions, compensation springs

Product description

A Double-Action mower with a working width of 1.65 metres for tractors from 35 hp. It brings the scissor-cut principle to farms with compact tractors, yard tractors and municipal tractors, as well as to orchards, horse paddocks and sloping ground, where a heavy disc mower is neither suitable nor necessary.

Scissor cut instead of impact cut – the difference starts at the stem

A rotary or disc mower cuts the stem with a high peripheral speed. A Double-Action cutter bar cuts it like scissors: the upper and lower blades move in opposite directions, guide the stem between them and cut it cleanly.

This has four effects at once:

  • Power requirement. There is no heavy rotating mass to accelerate and keep turning. The mower can be operated from just 35 hp, with correspondingly low diesel consumption.
  • Cut quality. A cleanly cut stem dries quickly at the cut surface. A crushed stem loses cell sap and becomes an entry point for fungi. Regrowth is faster and more even.
  • Cleanliness of the forage. The cutter bar works close to the ground but does not throw up soil, because no discs are rotating. Less soil in the forage means lower crude ash levels and less Clostridia contamination. This matters for silage quality and for farms supplying milk to cheesemakers, as Clostridia spores cause late blowing in cheese. A soil-free cut is also an advantage for clean hay, for example for horses or for hay milk production.
  • Insect protection. The slow cutting action, without suction, kills considerably fewer insects than an impact cut with airflow. In agri-environment and contractual nature conservation schemes, cutter-bar mowing is often a funding requirement. Please check the specific scheme conditions in your region.

1.65 metres – the right size for compact tractors

At around 256 kg without the lift and with a power requirement from 35 hp, this is the right size for smaller tractors.

On the ground: A lightweight implement allows you to use a lightweight tractor. Less total weight on the land means less compaction; on wet ground and wet pastures, this is often what makes it possible to drive at all.

On slopes: The lighter the mounted implement, the greater the stability of the combination. The cutter bar works down to −45 degrees and can therefore follow ditches and embankments.

On the tractor: The weight is not centred, but sits out to the side on the lift arms. In addition to engine power, the tractor’s lifting capacity, kerb weight and stability are therefore important. Please check the lifting capacity and permitted rear axle load before purchase; we will be happy to advise.

Individually replaceable blades – the difference from the riveted version

This feature sets the range apart from the manufacturer’s simpler Double-Action mowers, and makes a difference throughout the product’s service life.

With riveted blades, each blade is permanently attached to the knife back. If a stone, wire or molehill damages a blade, it must either be re-riveted or the complete knife replaced.

On this version, the blades can be replaced individually. The damaged blade is released and replaced in minutes, out in the field with the tools carried on the tractor, rather than spending an hour in the workshop. The guards are also bolted on and can be replaced individually.

Mechanical safety device

If the cutter bar hits a post, stone or tree stump, the safety device gives way and the bar swings out instead of breaking. That is the difference between a minute’s interruption and a bent cutter bar. According to the manufacturer, the system is also suitable for stony ground.

Mechanical or hydraulic lift

This size is available with two lift options:

Mechanical liftHydraulic lift
Operationby handfrom the driver’s seat
Tractor hydraulicsnot requiredcontrol valve required
Additional weightapprox. 11 kgapprox. 16 kg
Suitable forbasic tractors, infrequent repositioningfrequent lifting, many obstacles

The cutter bar can also be raised to +90 degrees. This makes it possible to trim hedges and mow embankments above the driving track, for example when maintaining verges, waterside buffer strips and landscapes.

Cutter bar guidance and swath placement

The skid is adjustable to three positions and determines the cutting height, down to a minimum of 3 cm. Compensation springs take weight off the cutter bar so that it does not dig in on soft ground.

The anti-flutter tie rod keeps the cutter bar on track. A vibrating bar cuts unevenly and causes disproportionate wear to the knife guide.

The swath former lays the cut material in a defined row instead of spreading it out. This is important for the subsequent work with a rotary tedder or swather.

Applications

Small grassland farms and part-time farms, horse keeping and hay for horses, orchards, sloping ground, wet sites, extensive areas under contractual nature conservation, landscape and roadside maintenance, waterside buffer strips, local authorities, and farms producing hay milk or milk for cheesemakers.

Operating notes

  • Check the tractor’s lifting capacity and stability before purchase. The weight sits off-centre to the side, so front ballast may be required.
  • Check the PTO shaft length and fit all guards correctly.
  • Check the blades regularly for wear and correct seating. Blunt blades crush rather than cut and increase the power requirement.
  • Always fit the blade guard for transport and storage.
  • Before working on the cutter bar, disengage the PTO, stop the engine and remove the key. Secure the implement against lowering.
  • Check the area for posts, wire and stones before the first cut. The safety device protects the cutter bar, but does not replace an inspection.

Frequently asked questions

What tractor do I need?

The power requirement starts at 35 hp. Lifting capacity and stability are just as important, because the mower is mounted out to the side on the rear lift arms. If in doubt, please contact us before purchase.

What is the difference between a Double-Action mower and a disc mower?

The cutting principle. A disc mower cuts the stem at high speed. With a Double-Action cutter bar, the upper and lower blades move in opposite directions and cut the stem with a scissor action. This means lower power and diesel requirements, a cleaner cut and faster regrowth, less soil in the forage and significantly greater protection for insects.

Is the lift mechanical or hydraulic?

Both options are available. The mechanical lift weighs around 11 kg and does not require tractor hydraulics. The hydraulic lift weighs around 16 kg and is operated from the driver’s seat.

What happens if the cutter bar hits an obstacle?

A mechanical safety device gives way and allows the cutter bar to swing out instead of breaking.

Can the blades be replaced individually?

Yes. A damaged blade can be released and replaced without changing the complete knife. The guards are also bolted on. A complete replacement knife is included in the scope of delivery.

Can I use it to cut hedges and embankments?

The cutter bar can be raised to +90° and lowered to −45°. This makes it suitable for trimming hedges and mowing embankments above and below the driving track.

How low does the mower cut?

The minimum cutting height is 3 cm. It is set using the skid, which is adjustable to three positions.

Is the mower suitable for areas under contractual nature conservation?

Cutter-bar mowing is considered particularly insect-friendly and is often included or required as a method in agri-environment and contractual nature conservation schemes. The specific requirements vary by region and scheme. Please check your scheme’s conditions before purchase.

Properties
Cultivation method: Heckanbau
Gerätetyp : Mähwerk
Kraftbedarf: ab 35PS
Working width: 1,65m