ENOROSSI Double-Action-Mähwerk 1,35 m, 195 kg, ab 20 PS, Heckanbau
€2,623.50
Scope of delivery
- 1 × Double-Action mower with 1.35 m working width, rear-mounted
- Mechanical safety device that trips on contact with an obstacle
- Tie rod to prevent blade flutter
- Compensation springs
- Swath former (metal deflector)
- PTO shaft
- Replacement blades, complete
- Blade guard for transport and storage
Select when ordering: mechanical or hydraulic lift.
Technical data
| Manufacturer | Enorossi (Enoagricola Rossi) |
|---|---|
| Type | Mower with Double-Action cutter bar (scissor cut, upper blade and counter-blade moving in opposite directions) |
| Mounting | Rear-mounted, three-point linkage Cat. I and II |
| Working width | 135 cm |
| Power requirement | from 20 hp |
| Weight | approx. 195 kg without lift, approx. 206 kg with mechanical lift, approx. 211 kg with hydraulic lift |
| Lift | mechanical or hydraulic, selectable |
| Drive | PTO via PTO shaft, three-belt drive with belt tension spring |
| Working speed | 8–12 km/h |
| Min. cutting height | 3 cm |
| Guards | riveted |
| Overload protection | mechanical safety device |
| Cutter bar working range | +90° to −45° |
| Cutter bar guidance | Skid, adjustable to three positions, outer shoe, compensation springs |
| Control support | Pressed steel with hardened bushes |
Product description
A Double-Action mower with a working width of 1.35 metres, weighing around 195 kg and requiring power from 20 hp. This is the smallest model in the range, designed for small, compact and yard tractors that would not be able to operate a disc mower.
Scissor cut instead of impact cut – the difference starts at the stem
A rotary or disc mower cuts the stem with a high peripheral speed. A Double-Action cutter bar cuts it like scissors: the upper and lower blades move in opposite directions, guide the stem between them and cut it cleanly.
This has four effects at once:
- Power requirement. There is no heavy rotating mass to accelerate and keep turning. The mower can be operated from just 20 hp, with correspondingly low diesel consumption.
- Cut quality. A cleanly cut stem dries quickly at the cut surface. A crushed stem loses cell sap and becomes an entry point for fungi. Regrowth is faster and more even.
- Cleanliness of the forage. The cutter bar works close to the ground but does not throw up soil, as no discs are rotating. Less soil in the forage means lower crude ash and less Clostridia contamination. A soil-free cut is a clear advantage for clean hay, for example for horses or small animals.
- Insect protection. The slow, cutting action without suction kills considerably fewer insects than an impact cut with airflow. In agri-environment and conservation schemes, cutter-bar mowing is often a funding requirement. Please check the specific scheme conditions in your region.
1.35 metres from 20 hp – cutter-bar mowing for small tractors
Weighing around 195 kg and requiring power from 20 hp, this mower is suitable for tractors for which there would otherwise be few practical mowing options.
- Suitable for small tractors: Almost all compact and yard tractors have 20 hp, including older narrow-track tractors.
- Low weight on the linkage: This reduces strain on the linkage and front axle of small tractors and makes the combination more stable on slopes.
- Low ground pressure: A light combination causes less compaction, a noticeable difference on wet horse paddocks and traditional orchards.
Riveted guards – what this means
Enorossi builds this range in two versions. This smallest model has riveted mower guards. From a working width of 1.65 m, the guards are bolted on.
| Riveted guards (this version) | Bolted guards (from 1.65 m) | |
|---|---|---|
| Replacing a guard | Drill out the rivet and fit a new one, in the workshop | with two spanners at the field edge |
| Weight and power requirement | lowest, from 20 hp | from 35 hp |
| Best suited to | areas with few stones, small tractors | stony areas, frequent use |
Who is it suitable for? On well-maintained areas with few stones, such as horse paddocks, orchards and domestic grassland, a guard rarely breaks. Here, the riveted version is the economical choice. If you regularly mow stony areas or unfamiliar ground, the larger models with bolted guards are a better option.
Mechanical safety device
If the cutter bar hits a post, stone or tree stump, the safety device releases and the bar swings out of the way instead of breaking. That is the difference between a one-minute interruption and a bent cutter bar.
Mechanical or hydraulic lift
| Mechanical lift | Hydraulic lift | |
|---|---|---|
| Operation | by hand | from the driver's seat |
| Tractor hydraulics | not required | control valve required |
| Additional weight | approx. 11 kg | approx. 16 kg |
| Useful for | basic tractors, infrequent lifting | frequent lifting at fences, trees and crossings |
The mechanical lift is often the right solution, particularly for small tractors without an auxiliary control valve.
The cutter bar can also be raised to +90° and lowered to −45°. This makes it possible to trim hedges and mow banks and ditch edges with the same machine.
Cutter bar guidance and swath placement
The skid is adjustable to three positions and determines the cutting height, down to a minimum of 3 cm. The outer shoe helps the cutter bar enter the crop rather than push it down. Compensation springs take weight off the bar so it does not cut into soft ground.
The tie rod prevents blade flutter and keeps the cutter bar on track. The swath former lays the cut material in a defined line, which is important for subsequent work with a tedder or rake.
Range overview
| Working width | Weight | Power requirement | Guards | Lift |
|---|---|---|---|---|
| 1.35 m | 195 kg | from 20 hp | riveted | mechanical or hydraulic |
| 1.50 m | 200 kg | from 20 hp | riveted | mechanical or hydraulic |
| 1.65 m | 256 kg | from 35 hp | bolted | mechanical or hydraulic |
| 1.80 m | 264 kg | from 35 hp | bolted | mechanical or hydraulic |
| 2.10 m | 287 kg | from 35 hp | bolted | mechanical or hydraulic |
| 2.40 m | 305 kg | from 50 hp | bolted | hydraulic |
| 2.70 m | 322 kg | from 50 hp | bolted | hydraulic |
Weights up to 2.10 m without lift; mechanical approx. +11 kg, hydraulic approx. +16 kg.
Applications
Horse keeping and hay for horses, hobby and part-time farming, traditional orchards and fruit meadows, domestic grassland, small animal keeping, municipal areas, banks and ditch edges, areas under conservation agreements.
Operating notes
- Check the tractor's lifting capacity and stability. The weight is offset to one side.
- Check the PTO shaft length and fit all guards correctly.
- Check blades regularly for wear and correct seating. Blunt blades crush rather than cut and increase the power requirement.
- Check belt tension at the start of the season.
- Always fit the blade guard for transport and storage.
- Before working on the cutter bar, disengage the PTO, stop the engine and remove the key. Secure the machine against lowering.
- Check the area for posts, wire and stones before the first cut. The safety device protects the cutter bar but does not replace an inspection.
Frequently asked questions
What tractor do I need?
The power requirement starts at 20 hp, and the tractor needs a Cat. I or II three-point linkage. This makes the mower suitable for most compact and yard tractors.
What is the difference between a Double-Action mower and a disc mower?
The cutting principle. A disc mower cuts the stem at high speed. With a Double-Action cutter bar, the upper and lower blades move in opposite directions and cut the stem with a scissor action. This means lower power and diesel requirements, a cleaner cut and faster regrowth, less soil in the forage and considerably greater protection for insects.
Are the guards bolted or riveted?
This version has riveted mower guards. A broken guard is drilled out and replaced with a new rivet in the workshop. Models with bolted guards are available from a working width of 1.65 m.
Is the lift mechanical or hydraulic?
Both options are available. The mechanical lift weighs around 11 kg and does not require tractor hydraulics. The hydraulic lift weighs around 16 kg and is operated from the driver's seat.
What happens if the cutter bar hits an obstacle?
A mechanical safety device releases and allows the cutter bar to swing out of the way instead of breaking.
Can I use it to cut hedges and mow banks?
The cutter bar can be raised to +90° and lowered to −45°. This allows you to trim hedges and mow banks above and below the tractor's path.
How low does the mower cut?
The minimum cutting height is 3 cm. It is set using the skid, which is adjustable to three positions.
Is the mower suitable for areas under conservation agreements?
Cutter-bar mowing is considered particularly insect-friendly and is often included or required as a method in agri-environment and conservation schemes. The specific requirements vary by region and scheme. Please check your scheme conditions before purchasing.
| Cultivation method: | Heckanbau |
|---|---|
| Gerätetyp : | Mähwerk |
| Kraftbedarf: | ab 20PS |
| Working width: | 1,35m |