Conow HW 60 (9t) V3.1
Conow HW 60 (9t) V3.1
-
Combined body variant 3.1 with dropside height 94 / 93 cm tiltable left or right
-
Outer dimensions of tipper body L/W/H in mm: 4500 / 2460 / 940
-
Profiled, laser-welded drop sides
-
Reinforced tipper body, ST 52 load-bearing beams
-
Tipper body with superstructure 94 / 93 cm high
-
Profiled laser-welded drop sides
-
Tiltable on the left
-
Left-hand sides with longitudinally divided drop sides
-
the upper dropside is mounted on pendulum bearings,
-
the lower dropside can be opened using kinematics
-
Dropside division (bottom/top in mm): 425 / 500
-
The right-hand dropside, the front and rear walls are
-
continuous drop sides and firmly welded to the tipper body
-
Dropside height: 940 mm
-
incl. colouring: primer and 2-component cono green paint
Technical data
|
Chassis: |
9 t gross vehicle weight |
|
Load volume: |
approx. 9.7 m³ |
|
Maximum authorised speed: |
25, 40 or 60 km/h, incl. Dekra approval |
dimensions
|
Dropside height |
940 mm |
|
Track width: |
1750 mm |
|
Body length outside/inside: |
4400 mm / 4500 mm |
|
Body width outside/inside: |
2340 mm / 2460 mm |
-
Tyres: standard tyres 385/65 R 22.5
-
Drawbar: 2150 mm or 1800 mm
-
Axles: Bergische axles (BPW), square 70 mm, axle pads for spring width 80 mm
-
Brake system: Two-wire air brake system
-
Suspension: Combination of 10 mm leaf springs, layer thickness and rubber suspension
-
Chassis frame: solid frame as welded construction made of 120 mm U-profile, ST 52 chassis frame
-
Tilt bearings: 4 tilt bearings
-
Tilt cylinders: 2 three-stage hydraulic cylinders, each with a load capacity of 11.7 tonnes in the 1st stage
-
Turntable: ND 950
-
Lighting: 12 V
-
DEKRA approval: depending on permissible speed 25, 40 or 60 km/h
-
Colour scheme: Light ivory primer, chassis 2-component paint red, RAL 3002, body 2-component paint cono green
Conow Anhängerbau
Deutschlands größter Hersteller von HW 60 und HW 80 Anhängern und Aufbauten.