Conow HW 60 (9t) V2.2

Price on request

Product number: BL12023

Bulk goods body variant 2.2 with side wall height 94 cm tiltable left or right
Central locking as standard
External tipper body dimensions L/W/H in mm: 45000 / 2460 / 940
Profiled, laser-welded drop sides
Reinforced tipper body, ST 52 load-bearing beams
Front and rear walls are continuous drop sides and firmly welded to the tipper body, welded on the right, left side with two pendulum drop sides, centre stanchion and central locking, stable corner and centre stanchions. The locking elements of the central locking system are drop-forged and therefore of very high quality. The dropside seal guarantees rape tightness. One side can also be welded on request.
Colour: 2-component conov green paint

Technical data

Tyres: Standard tyres 385/65 R 22.5
Drawbar: 2150 mm or 1800 mm
Axles: Bergische axles (BPW), square 70 mm, axle pads for spring width 80 mm
Brake system: Two-wire air brake system
Suspension: Combination of 10 mm leaf springs, layer thickness and rubber suspension
Chassis frame: solid frame as welded construction made of U-profile 120 mm, ST 52
Tilt bearings: 4 tilt bearings
Tilt cylinders: 2 three-stage hydraulic cylinders, each with a load capacity of 11.7 tonnes in the 1st stage
Turntable: ND 950
Lighting: 12 V
DEKRA approval: depending on permissible speed 25, 40 or 60 km/h
Colour scheme: Light ivory primer, chassis 2-component paint red, RAL 3002, body 2-component paint cono green

(All dimensions are approximate)

Deutschlands größter Hersteller von HW 60 und HW 80 Anhängern und Aufbauten.