Conow HW 60 (9t) V2.1
Conow HW 60 (9t) V2.1
Technical data
|
Chassis: |
9 tonnes gross vehicle weight |
|
Load volume: |
approx. 9.7m³ |
|
Maximum authorised speed: |
25 km/h 40 km/h and 60 km/h, incl. Dekra approval |
Standard equipment
-
Tyres: Standard tyres 385/65 R 22.5
-
Drawbar: 2150 mm or 1800 mm
-
Axles: Bergische axles (BPW), square 70 mm, axle pads for spring width 80 mm
-
Brake system: Two-wire air brake system
-
Suspension: Combination of 10 mm leaf springs, layer thickness and rubber suspension
-
Chassis frame: solid frame as welded construction made of 120 mm U-profile, ST 52 chassis frame
-
Tilt bearing: 4 tilt bearings
-
Tilt cylinders: 2 three-stage hydraulic cylinders, each with a load capacity of 11.7 tonnes in the 1st stage
-
Turntable: ND 950
-
Lighting: 12 V
-
DEKRA approval: depending on permissible speed 25, 40 or 60 km/h
-
Colour scheme: Light ivory primer, chassis 2-component paint red, RAL 3002, body 2-component paint cono green
Conow Anhängerbau
Deutschlands größter Hersteller von HW 60 und HW 80 Anhängern und Aufbauten.