Skip to main content Skip to search Skip to main navigation

Menu

Compressor Battioni Paggani Star 84PRA

Description

Compressor Battioni Paggani Star 84PRA

Areas of application
These vacuum pumps with vanes are mainly used in the agricultural sector for filling and emptying slurry tanks
 
Properties
These pumps can generate both positive and negative pressure
 
Technical information
  • Composition of article numbers: STAR = series, 72 = type, P = pulley drive, R = clockwise, A = automatic lubrication
  • For pumps without automatic lubrication (no "A" in the article number), the pump is equipped with forced lubrication, which is adjusted using drip nozzles. Forced lubrication available on request
  • On a pump with automatic lubrication, the lubricating oil quantity is set at the factory and cannot be changed without tools
  • With forced lubrication as with automatic lubrication, the function must be checked at all times during operation
  • Pumps with belt pulley drive are clockwise rotating. Left-hand rotation available on request
  • The direction of rotation is determined when the axis to be driven is directed towards the viewer
  • Oil to be used to lubricate the discs: Original oil from B.P. (article number BP5070)
  • STAR replaces the Agri and Euro series
 
Nominal volume flow
14800 l/min
 
Drive type
Belt pulley
 
Direction of rotation
Clockwise rotation (CW)
 
Ballast air injection system
No
 
Scope of delivery
  • Without pulley
  • Including vacuum valve
  • Without pressure relief valve (article 0200013)
  • These pumps are supplied with standard vanes. Long-life vanes available on request
  • Including swivelling connection pipes
  • The pumps are supplied without lubricating oil (item BP5070)
 
Lubrication system type
Automatic
 
Slat type
Standard
 
Collision protection system
No
 
Max. Vacuum
0.9 bar
 
Max. relative pressure
1.5 bar
 
Power requirement for max. vacuum
29 kW
 
ETotal length
90 mm
 
OTotal width
490 mm
 
GHeight
540 mm
 
FMounting hole diameter
18 mm
 
B,LDistance between mounting holes
  • 245 mm
  • 247 mm
 
ADistance between mounting holes and shaft end
289 mm
 
CDistance mounting holes to end
269 mm
 
MDistance, centre of shaft to left end
220 mm
 
NDistance from the centre of the shaft to the end of the right-hand side
220 mm
 
IDistance from the centre of the shaft to the floor
196 mm
 
Wavelength
90 mm
 
Max. Shaft rotation
1200 rpm
 
Weight
239 kg