Compressor Battioni Paggani MEC9000MSC

details

• The pumps in the MEC II series have an automatic protection system. For example, the rotor and rotor housing can be protected in the event of a valve breakage by pushing the rotor - including the flange mountings - downwards
• The pumps in the MEC II series are supplied with durable (heat-resistant) vanes as standard
• The pumps in the MEC II series have a temperature gauge that can be used to read the temperature during operation
• A maintenance flap can be used to determine the wear condition of the blades and indicate when the blades need to be replaced
• Each pump undergoes a final inspection at the factory, during which vacuum, compression and lubrication are tested, among other things
• A test report is created for each pump using the serial number

Area of application

Properties

Technical data

• Composition of the article numbers: MEC = Series, 9000 = Type, M = Indirect drive 540 rpm, SC = Reel compressor
• Drum compressors are equipped with a forced lubrication system that is adjusted with drip nozzles
• The lubrication system must be checked at all times to ensure proper functioning
• Pumps with indirect drive (M) must be driven anti-clockwise
• The direction of rotation is determined when the axis to be driven is orientated towards the viewer
• If the pump has a direct drive (e.g. by a tractor unit), it must be driven anti-clockwise
• Oil for lubricating the blades: Original oil from B. P. (item number BP5070)

Useful

• Minimised repair costs thanks to the unique automatic protection system
• As B.P. pumps are tested, inspected and packaged with the utmost care, a trouble-free start is 100% guaranteed

Nominal volume flow

Drive type

Direction of rotation

Ballast-air injection system

Consisting of

• The S.C. version has a forced lubrication system
• Drive shaft cover included
• The pumps are supplied without lubricating oil (item BP5070)

Type of lubrication system

Impeller type

Impact protection system

Max. Relative pressure

Hose connection diameter

Total length

Total width

Height

Diameter of the fixing holes

Distance between the fixing holes

• 246 mm
• 189 mm

Mounting holes for shaft end distance

Fixing holes to the end distance

Distance of the shaft centre to the left side

Distance from the centre of the shaft to the right-hand side

Distance of the shaft from centre to floor

Shaft diameter

Max. Shaft rotation

Reservoir capacity

Weight