Compressor Battioni Paggani MEC9000M

details

• The pumps in the MEC II series have an automatic protection system. For example, the rotor and rotor housing can be protected in the event of a valve breakage by pushing the rotor - including the flange mountings - downwards
• Pumps with a "ballast system", characterised by B at the end of the article number (e.g. MEC9000MB), have a longer operating time in vacuum mode
• The operating time at -0.95 bar is 8 minutes (standard) up to a maximum of 15 minutes. Continuous operation is permitted at -0.6 bar.
• The pumps in the MEC II series are supplied with durable (heat-resistant) vanes as standard
• The pumps in the MEC II series have a temperature gauge that can be used to read the temperature during operation
• A maintenance flap can be used to determine the wear condition of the blades and indicate when the blades need to be replaced
• Each pump undergoes a final inspection at the factory, during which vacuum, compression and lubrication are tested, among other things
• A test report is created for each pump using the serial number

Area of application

Properties

Technical data

• Composition of the article numbers: MEC = series, 9000 = type, M = indirect drive 540 rpm, A = automatic lubrication, B = ballast system
• For pumps without automatic lubrication (no "A" in the article number), the pump is equipped with a forced lubrication system that is adjusted via drip nozzles
• For pumps without automatic lubrication, the lubricating oil quantity is set at the factory and cannot be changed without tools
• With forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
• Pumps with indirect drive (M) must be driven anti-clockwise
• The direction of rotation is determined when the axis to be driven is orientated towards the viewer
• If the pump has a direct drive (e.g. by a tractor unit), it must be driven anti-clockwise
• Oil for lubricating the blades: Original oil from B. P. (item number BP5070)

Useful

• Minimised repair costs thanks to the unique automatic protection system
• As B.P. pumps are tested, inspected and packaged with the utmost care, a trouble-free start is 100% guaranteed

Nominal volume flow

Drive type

Direction of rotation

Ballast-air injection system

Consisting of

• Drive shaft cover included
• Without pressure relief valve (art. 0200013) and vacuum valve (art. 0155513)
• The pumps are supplied without lubricating oil (item BP5070)

Type of lubrication system

Impeller type

Impact protection system

Maximum vacuum

Max. Relative pressure

Power requirement at max. pressure

Power requirement at max. vacuum

D,PHose connection diameter

Connection diameter of the safety valve

Connection diameter of the vacuum valve

ETotal length

OTotal width

HHeight

FDiameter of the fixing holes

B,LDistance between the fixing holes

• 189 mm
• 246 mm

AMounting holes for shaft end distance

CFixing holes to the end distance

MDistance of the shaft centre to the left side

NDistance from the centre of the shaft to the right-hand side

IDistance of the shaft from centre to floor

Shaft diameter

Max. Shaft rotation

Reservoir capacity

Weight

Additional information