Go to homepage
Language
Delivery Country
€0.00

Menu

Compressor Battioni Paggani MEC9000A

Skip image gallery
BL20017 Kompressor Battioni Paggani MEC11000M

€1,910.00

Prices exclude VAT.

Free shipping

Product number: BL20009

Description

Compressor Battioni Paggani MEC9000A

details
  • The pumps in the MEC II series have an automatic protection system. For example, the rotor and rotor housing can be protected in the event of a valve breakage by pushing the rotor - including the flange mountings - downwards
  • Pumps with a "ballast system", characterised by B at the end of the article number (e.g. MEC9000MB), have a longer operating time in vacuum mode
  • The operating time at -0.95 bar is 8 minutes (standard) up to a maximum of 15 minutes. Continuous operation is permitted at -0.6 bar.
  • The pumps in the MEC II series are supplied with durable (heat-resistant) vanes as standard
  • The pumps in the MEC II series have a temperature gauge that can be used to read the temperature during operation
  • A maintenance flap can be used to determine the wear condition of the blades and indicate when the blades need to be replaced
  • Each pump undergoes a final inspection at the factory, during which vacuum, compression and lubrication are tested, among other things
  • A test report is created for each pump using the serial number
  
Area of application
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
  
Properties
These pumps can generate both overpressure and vacuum
  
Technical data
  • Composition of the article numbers: MEC = series, 9000 = type, M = indirect drive 540 rpm, A = automatic lubrication, B = ballast system
  • For pumps without automatic lubrication (no "A" in the article number), the pump is equipped with a forced lubrication system that is adjusted via drip nozzles
  • For pumps without automatic lubrication, the lubricating oil quantity is set at the factory and cannot be changed without tools
  • With forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
  • Pumps with indirect drive (M) must be driven anti-clockwise
  • The direction of rotation is determined when the axis to be driven is orientated towards the viewer
  • If the pump has a direct drive (e.g. by a tractor unit), it must be driven anti-clockwise
  • Oil for lubricating the blades: Original oil from B. P. (item number BP5070)
  
Useful
  • Minimised repair costs thanks to the unique automatic protection system
  • As B.P. pumps are tested, inspected and packaged with the utmost care, a trouble-free start is 100% guaranteed
  
Nominal volume flow
9030 l/min
  
Drive type
PTO shaft 540 rpm
  
Direction of rotation
Anti-clockwise (CCW)
  
Ballast-air injection system
No
  
Consisting of
  • Drive shaft cover included
  • Without pressure relief valve (art. 0200013) and vacuum valve (art. 0155513)
  • The pumps are supplied without lubricating oil (item BP5070)
  
Type of lubrication system
Automatic
  
Impeller type
Long service life
  
Impact protection system
Yes
  
Maximum vacuum
0.95 BAR
  
Max. Relative pressure
1.5 BAR
  
Power requirement at max. pressure
36 kW
  
Power requirement at max. vacuum
17 kW
  
D,PHose connection diameter
80 mm
  
Connection diameter of the safety valve
2 inch
  
Connection diameter of the vacuum valve
1-1/2 inch
  
ETotal length
670 mm
  
OTotal width
390 mm
  
HHeight
605 mm
  
FDiameter of the fixing holes
22 mm
  
B,LDistance between the fixing holes
  • 189 mm
  • 246 mm
  
AMounting holes for shaft end distance
340 mm
  
CFixing holes to the end distance
141 mm
  
MDistance of the shaft centre to the left side
195 mm
  
NDistance from the centre of the shaft to the right-hand side
195 mm
  
IDistance of the shaft from centre to floor
69 mm
  
Shaft diameter
1-3/8 inch
  
Max. Shaft rotation
540 rpm
  
Reservoir capacity
2,5 l
  
Weight
145 kg
This website uses cookies to ensure the best experience possible. More information...
Privacy policy | Imprint