Compressor Battioni Paggani MEC13500DL

Special features

• The pumps in the MEC II series have an automatic protection system. For example, the rotor and rotor housing can be protected in the event of a vane breakage by sliding the rotor including the mounting flanges downwards
• Pumps with "ballast system", recognisable by the B at the end of the article number (e.g. MEC9000MB, have a longer running time in vacuum operation
• The running time at -0.95 bar ranges from 8 minutes (standard) to a maximum of 15 minutes. Continuous operation is permitted at -0.6 bar.
• MEC II pumps are supplied with durable (heat-resistant) vanes as standard
• Pumps in the MEC II series have a temperature display so that the temperature can be read during operation
• A maintenance hatch allows the wear condition of the discs to be determined, indicating when the discs need to be replaced
• Each pump undergoes a final test at the factory, including vacuum, compression and lubrication tests
• A test report relating to the serial number is created for each pump

Areas of application

Properties

Technical information

• Composition of the article numbers: MEC = series, 9000 = type, D = direct drive 1,000 rpm, L = anticlockwise, R = clockwise, A = automatic lubrication, B = ballast system
• For pumps without automatic lubrication (no "A" in the article number), the pump is equipped with forced lubrication, which is adjusted using drip nozzles
• On a pump with automatic lubrication, the lubricating oil quantity is set at the factory and cannot be changed without tools
• With forced lubrication as with automatic lubrication, the function must be checked at all times during operation
• The direction of rotation is determined when the axis to be driven is directed towards the viewer
• If a pump is driven directly (e.g. by a tractor), it must be driven in anti-clockwise direction
• Oil to be used to lubricate the discs: Original oil from B.P. (article number BP5070)

Advantages

• Minimised repair costs thanks to the unique automatic protection system
• As B.P. pumps are tested, checked and packaged with the utmost care, one hundred per cent trouble-free start-up is guaranteed

Nominal volume flow

Drive type

Direction of rotation

Ballast air injection system

Scope of delivery

• Drive shaft cover included
• Without pressure relief valve (article 0200013) and vacuum valve (article 0155513)
• The pumps are supplied without lubricating oil (item BP5070)

Lubrication system type

Slat type

Collision protection system

Max. Vacuum

Max. relative pressure

Power requirement for max. pressure

Power requirement for max. vacuum

D,PDiameter of the hose connection

Diameter of safety valve connection

Diameter of the connection of the vacuum valve

ETotal length

OTotal width

GHeight

FMounting hole diameter

B,LDistance between mounting holes

• 247 mm
• 246 mm

ADistance between mounting holes and shaft end

CDistance mounting holes to end

MDistance, centre of shaft to left end

NDistance from the centre of the shaft to the end of the right-hand side

IDistance from the centre of the shaft to the floor

Shaft diameter

Max. Shaft rotation

Container volume

Weight