Compressor Battioni Paggani MEC11000M

Battioni Paggani

€2,040.00

Prices exclude VAT.

Free shipping

Available, delivery time: 2-3 Tage

Product number: BL20017

Compressor Battioni Paggani MEC11000M

Special features	The pumps in the MEC II series have an automatic protection system. For example, the rotor and rotor housing can be protected in the event of a vane breakage by sliding the rotor including the mounting flanges downwards Pumps with "ballast system", recognisable by the B at the end of the article number (e.g. MEC9000MB, have a longer running time in vacuum operation The running time at -0.95 bar ranges from 8 minutes (standard) to a maximum of 15 minutes. Continuous operation is permitted at -0.6 bar. MEC II pumps are supplied with durable (heat-resistant) vanes as standard Pumps in the MEC II series have a temperature display so that the temperature can be read during operation A maintenance hatch allows the wear condition of the discs to be determined, indicating when the discs need to be replaced Each pump undergoes a final test at the factory, including vacuum, compression and lubrication tests A test report relating to the serial number is created for each pump
Areas of application	These vacuum pumps with vanes are mainly used in the agricultural sector for filling and emptying slurry tanks
Properties	These pumps can generate both positive and negative pressure
Technical information	Composition of the article numbers: MEC = series, 9000 = type, M = indirect drive 540 rpm, A = automatic lubrication, B = ballast system For pumps without automatic lubrication (no "A" in the article number), the pump is equipped with forced lubrication, which is adjusted using drip nozzles On a pump with automatic lubrication, the lubricating oil quantity is set at the factory and cannot be changed without tools With forced lubrication as with automatic lubrication, the function must be checked at all times during operation Pumps with indirect drive (M) must be driven in anti-clockwise direction The direction of rotation is determined when the axis to be driven is directed towards the viewer If a pump is driven directly (e.g. by a tractor), it must be driven in anti-clockwise direction Oil to be used to lubricate the discs: Original oil from B.P. (article number BP5070)
Advantages	Minimised repair costs thanks to the unique automatic protection system As B.P. pumps are tested, checked and packaged with the utmost care, one hundred per cent trouble-free start-up is guaranteed
Nominal volume flow	11137 l/min
Drive type	Cardan shaft, 540 rpm
Direction of rotation	Counterclockwise rotation (CCW)
Ballast air injection system	No
Scope of delivery	Drive shaft cover included Without pressure relief valve (article 0200013) and vacuum valve (article 0155513) The pumps are supplied without lubricating oil (item BP5070)
Lubrication system type	Manual
Slat type	Long service life
Collision protection system	Yes
Max. Vacuum	0.95 bar
Max. relative pressure	1.5 bar
Power requirement for max. pressure	40 kW
Power requirement for max. vacuum	21 kW
D,PDiameter of the hose connection	80 mm
Diameter of safety valve connection	2 inch
Diameter of the connection of the vacuum valve	1-1/2 inch
ETotal length	740 mm
OTotal width	390 mm
HHeight	605 mm
FMounting hole diameter	22 mm
B,LDistance between mounting holes	247 mm 246 mm
ADistance between mounting holes and shaft end	346 mm
CDistance mounting holes to end	147 mm
MDistance, centre of shaft to left end	195 mm
NDistance from the centre of the shaft to the end of the right-hand side	195 mm
IDistance from the centre of the shaft to the floor	69 mm
Shaft diameter	1-3/8 inch
Max. Shaft rotation	540 rpm
Container volume	3 l
Weight	160 kg

Menu

Compressor Battioni Paggani MEC11000M

Description

Compressor Battioni Paggani MEC11000M

Your account

Menu

Compressor Battioni Paggani MEC11000M

Description

Compressor Battioni Paggani MEC11000M