To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

[data-zen-scroll-cms-animation] .zen-animate, [data-zen-scroll-listing-animation] .zen-animate-listing { visibility: visible; }

SPAREPARTS: +4937322 862-25 | MO-FR: 9 am - 4 pm | MACHINES: +4937322 862-44

This B2B shop is intended exclusively for commercial business customers.

Compressor Battioni Paggani MEC11000HAB

Battioni Paggani

Compressor Battioni Paggani MEC11000HAB

€3,110.00

Prices exclude VAT.

Free shipping

Product number: BL20089

Compressor Battioni Paggani MEC11000HAB

Special features	The pumps in the MEC II series have an automatic protection system. For example, the rotor and rotor housing can be protected in the event of a vane breakage by sliding the rotor including the mounting flanges downwards Pumps with "ballast system", recognisable by the B at the end of the article number (e.g. MEC9000MB, have a longer running time in vacuum operation The running time at -0.95 bar ranges from 8 minutes (standard) to a maximum of 15 minutes. Continuous operation is permitted at -0.6 bar. MEC II pumps are supplied with durable (heat-resistant) vanes as standard Pumps in the MEC II series have a temperature display so that the temperature can be read during operation A maintenance hatch allows the wear condition of the discs to be determined, indicating when the discs need to be replaced Each pump undergoes a final test at the factory, including vacuum, compression and lubrication tests A test report relating to the serial number is created for each pump
Areas of application	These vacuum pumps with vanes are mainly used in the agricultural sector for filling and emptying slurry tanks
Properties	These pumps can generate both positive and negative pressure
Technical information	Composition of the article numbers: MEC = series, 9000 = type, H = hydraulic drive, B = ballast system For pumps without automatic lubrication (no "A" in the article number), the pump is equipped with forced lubrication, which is adjusted using drip nozzles. Automatic lubrication available on request On a pump with automatic lubrication, the lubricating oil quantity is set at the factory and cannot be changed without tools With forced lubrication as with automatic lubrication, the function must be checked at all times during operation Pumps with hydraulic drive are clockwise rotating The direction of rotation is determined when the axis to be driven is directed towards the viewer Oil to be used to lubricate the discs: Original oil from B.P. (article number BP5070)
Advantages	Minimised repair costs thanks to the unique automatic protection system As B.P. pumps are tested, checked and packaged with the utmost care, one hundred per cent trouble-free start-up is guaranteed
Drive type	Hydraulics
Direction of rotation	Clockwise rotation (CW)
Ballast air injection system	Yes
Scope of delivery	Without pressure relief valve (article 0200013) and vacuum valve (article 0155513) Without hydraulic motor and wedge bush The pumps are supplied without lubricating oil (item BP5070) Including hydraulic base for mounting the hydraulic motor
Lubrication system type	Automatic
Slat type	Long service life
Collision protection system	Yes
Max. relative pressure	1.5 bar