Skip to main content Skip to search Skip to main navigation

Menu

Casappa piston pump LVP - 30 cm³/rev

Description

Casappa piston pump LVP - 30 cm³/rev

Detailed description
Tandem piston pumps, open centre, type LVP-30
 
Areas of application
Medium pressure range; up to 280 bar
 
Technical information
  • The LVP series pumps from Casappa are axial piston variable displacement pumps in swash plate design.
  • They are used for hydrostatic drives (with open circuit) in the medium pressure range.
  • They are available with a displacement volume of 30-48-75 cm³ (90 cm³ is still under development).
  • As these pumps can be equipped with different control devices, there are many possible combinations. Kramp therefore stocks pumps with LS controllers (LS2) and builds other control devices (with the exception of the RN power controller) on customer request.
  • These standard pumps (see table below) have a side connection, a splined shaft (type 04) and a load-sensing controller (LS2).
  • You will find explanations of the individual codes in the type code.
  • Explanation:
  • RP-0: Pressure regulator, set to 280 bar as standard (is also the maximum value).
  • LS-2: Load sensing with pressure regulator, set to 14 bar and 280 bar. The outer regulator is the pressure regulator, the inner regulator is the load-sensing regulator.
  • Further specifications can be found on the data sheets
 
Clutch bushing
03
 
Flange type
S5 = SAE B centering ring ø 101.6mm
 
max. pressure
280 bar
 
Rear cover
SAE-A
 
Connection code
  • MD / QB
  • MD = 3000 Psi 1"1/4
  • QB = 6000 Psi 3/4"