Bobcat L28 articulated loader – Compact high-performance articulated loader with 1109 kg tipping load & 2.7 m lifting height

Technical data - Bobcat articulated loader L28

Most important specifications

• Tipping load: 1109 kg
• Engine power: 18.2 kW
• Operating weight: 1903 kg
• Lifting height: 2.7 m
• Bucket content: 0.28 m³

Weight

• Operating weight: 1903 kg
• Transport weight: 1731 kg

Performance data

• Tipping load - straight - bucket: 1392 kg
• Tipping load - straight - forks: 945 kg
• Tipping load - straight extended - bucket: 805 kg
• Tipping load - straight extended - forks: 601 kg
• Tipping load - articulated - bucket: 1109 kg
• Tipping load - articulated - forks: 759 kg
• Tipping load - articulated extended - bucket: 645 kg
• Tipping load - articulated extended - forks: 479 kg
• Mobile payload - straight - bucket: 696 kg
• Mobile payload - straight - forks: 473 kg
• Mobile payload - straight extended - bucket: 403 kg
• Mobile payload - straight extended - forks: 301 kg
• Mobile payload - articulated - bucket: 554 kg
• Mobile payload - articulated - forks: 380 kg
• Mobile payload - articulated extended - bucket: 323 kg
• Mobile payload - articulated extended - forks: 239 kg
• Lifting force: 1085 kg
• Breakout force - cantilever: 1141 kg

Engine

• Make/model: Kubota D1305-E4B-BC-1
• Fuel: Diesel
• Power at 2600 rpm: 18.20 kW
• Torque at 1700 rpm: 81.30 Nm
• Cylinder: 3 In-Line
• cubic capacity: 1.26 L
• Cooling: 53% propylene glycol / 47% water

Filling quantities

• Cooling system: 5.70 L
• Fuel tank: 36.20 L
• Engine oil: 3.80 L
• Hydraulic/hydrostatic system: 20.80 L

Hydraulic system

• System relief: 20.00 MPa
• Appliance pump: Motorised gear type
• Conveying capacity: 45.80 L/min
• Main filter: Replaceable 16(c) ≥ 75 ISO 4572, 0.34 MPa bypass
• Tank vent filter: Not replaceable, 10 micron
• Control valve: Manual & electro-hydraulic (parallel construction)
• Hydraulic oil: Premium ISO V646

Drive system

• Gearbox: All-wheel drive with automatic driving modes
• Option: Traction support

Electrics

• Alternator: 90 A
• Battery: 12 V, 540 A cold start power, 80 min reserve
• Starter motor: 12 V, 2.0 kW Gear type

Cycle times

• Lifting time: 2.60 s
• Lowering time: 2.20 s
• Dumping time: 1.40 s
• Tipping-in time: 1.80 s

Dimensions

• Cabin height: 1983.70 mm
• Ground clearance: 139.10 mm
• Wheelbase: 1200.00 mm
• Overall length with bucket: 3109.00 mm
• Digging depth: 19.50 mm
• Max. distribution amount: 2136.40 mm
• Hinge pin at max. height: 2650.60 mm
• Exit angle: 23°
• Turning circle over bucket: 2407.70 mm
• Inside turning circle: 931.50 mm
• Width over bucket: 1117.60 mm
• Machine width: 1180.70 mm
• Kink angle: 43°
• Discharge angle at maximum height: 40°