Bobcat L23 articulated loader – compact loader with 1051 kg tipping load & 18.2 kW engine power

Technical data - Bobcat articulated loader L23

Performance data

• Tipping load (straight - bucket): 1265 kg
• Tipping load (straight - forks): 872 kg
• Tipping load (articulated - bucket): 1051 kg
• Tipping load (articulated - forks): 724 kg
• Mobile payload (straight - bucket): 633 kg
• Mobile payload (straight - forks): 436 kg
• Mobile payload (articulated - bucket): 525 kg
• Mobile payload (articulated - forks): 362 kg
• Lifting force: 1116 kg
• Breakout force - cantilever: 1047 kg
• Lifting height: 2.20 m
• Bucket content: 0.23 m³

Engine

• Make/model: Kubota D1305-E4B-BC-1
• Fuel: Diesel
• Power at 2600 rpm: 18.20 kW
• Torque at 1700 rpm: 81.30 Nm
• Cylinder: 3 In-Line
• cubic capacity: 1.26 L
• Cooling: 53% propylene glycol / 47% water

Weight

• Operating weight: 1719 kg
• Transport weight: 1540 kg

Hydraulic system

• System relief: 20.00 MPa
• Appliance pump: Motorised gear type
• Conveying capacity: 45.80 L/min
• Main filter: Replaceable 16(c) ≥ 75 ISO 4572, 0.34 MPa bypass
• Tank vent filter: Not replaceable, 10 micron
• Control valve: Manual & electro-hydraulic (parallel construction)
• Hydraulic oil: Premium, wear-resistant, ISO V646

Cycle times

• Lifting time: 2.40 s
• Lowering time: 2.00 s
• Dumping time: 1.70 s
• Tipping-in time: 1.20 s

Filling quantities

• Cooling system: 5.70 L
• Fuel tank: 36.20 L
• Engine oil: 3.80 L
• Hydraulics/hydrostatic: 18.50 L

Drive system

• Gearbox: All-wheel drive with automatic driving modes
• Option: Traction support

Electrics

• Alternator: 90 A ventilated
• Battery: 12 V, 540 A cold start power, 80 min reserve capacity
• Starter motor: 12 V, 2.0 kW

Dimensions

• Cabin height: 1983.70 mm
• Ground clearance: 139.10 mm
• Wheelbase: 1200.00 mm
• Overall length with bucket: 3109.00 mm
• Digging depth: 19.50 mm
• Max. distribution amount: 1654.80 mm
• Hinge pin at max. height: 2169.20 mm
• Width over bucket: 1117.60 mm
• Machine width: 1180.70 mm
• Turning circle over bucket: 2339.20 mm
• Inside turning circle: 974.40 mm
• Kink angle: 43°
• Discharge angle max. height: 40°
• Exit angle: 23°