Berti Schlegelmulcher TBF/M 200 cm, Heckanbau, 540 U/min, Schlegel Typ M
€7,950.00
Scope of delivery
- 1× Berti flail mower, working width 200 cm, Heavy-Duty version
- MEGA rotor with 18 forged and hardened M flails (2.4 kg each)
- Forged counter-blades
- Adjustable roller Ø 194 mm with height adjustment and scraper
- Mechanical side shift (hydraulic optional)
- PTO shaft (Heavy Duty, 1-3/8″ 6-spline)
- Front protective curtain with chains and rubber
- Collection rake
Technical data
| Manufacturer | Berti Macchine Agricole SpA (Italy) |
|---|---|
| Machine type | Flail mower, Heavy Duty, Low Body |
| Working width | 200 cm |
| Three-point linkage | Category II, adjustable, with top link mounting |
| PTO speed | 540 rpm |
| PTO shaft | Heavy Duty, 1-3/8″ 6-spline |
| Tractor power | 70–150 hp |
| Rotor | MEGA rotor, extra-heavy-duty version |
| Flails | 18 pieces, type M, forged and hardened, 2.4 kg/piece |
| Counter-blades | Forged |
| Housing | Double-skinned, high-performance Strenx steel |
| Discharge hood | Fixed, rear discharge |
| Adjustable roller | Ø 194 mm, height-adjustable, with scraper |
| Side shift | Mechanical (hydraulic optional) |
| Gearbox | With overrunning clutch |
| Belt tensioner | Fully automatic |
| Max. branch diameter | Ø 12 cm |
Product description
Who it is designed for
The Berti flail mower with a 200 cm working width is designed for farmers, fruit growers, winegrowers, contractors and municipal maintenance teams looking after grassland, orchards, vineyards, embankments and fallow land. In the Heavy-Duty version, the machine mulches not only grass and vegetation, but also scrub, vine prunings, cuttings and woody branches up to 12 cm in diameter.
MEGA rotor – extra-heavy-duty version
The MEGA rotor is the heart of the Berti flail mower. Its extra-heavy construction creates a high rotational mass, so it keeps turning even in thick wood and matted vegetation. Combined with the 18 forged M flails, it produces a fine, even mulch – important for the material to decompose quickly on the ground.
Forged M flails weighing 2.4 kg
Each of the 18 flails weighs 2.4 kg and is forged and hardened. Compared with stamped flails, forged flails last longer because the material is denser and tougher. The M type is versatile: it cuts grass cleanly while also shredding woody material. The flails can be replaced individually.
Double-skinned housing made from Strenx steel
The housing is double-skinned and made from high-performance Strenx steel. Strenx is lighter than conventional structural steel at the same strength – reducing weight without compromising durability. The double-skinned construction protects against penetration by stones or foreign objects and reduces noise levels.
Adjustable roller with height adjustment
The rear adjustable roller (Ø 194 mm) determines the working height and therefore the cutting or mulching depth. Use the stepless height adjustment to adapt the working depth to the vegetation – lower for a short cut on grassland, higher for scrub and vine prunings. The integrated scraper keeps the roller clean.
Overrunning clutch in the gearbox
The gearbox is fitted with an overrunning clutch. If the PTO is suddenly disengaged or switched off, the rotor continues to turn without transmitting power back to the tractor gearbox. This protects both the tractor and the PTO shaft from peak loads and extends the service life of the driveline.
Available working widths
| Working width | PTO | Application |
|---|---|---|
| 180 cm | 540 rpm | Narrow row spacing, viticulture |
| 200 cm | 540 rpm | This item – orchards, grassland, municipal use |
| 220 cm | 540 rpm | Larger areas, wide rows |
| 250 cm | 1,000 rpm | Large tractors, embankment maintenance |
| 270 cm | 1,000 rpm | Heavy-duty land maintenance, forestry work |
| 285 cm | 1,000 rpm | Professional use, large areas of fallow land |
| 300 cm | 1,000 rpm | Maximum area coverage |
Note: A PTO speed of 1,000 rpm is required for working widths of 250 cm and above.
What this flail mower does not have – and why
| Feature | Why not | Alternative |
|---|---|---|
| Hydraulic side shift as standard | Not every farm needs lateral offset; the mechanical version is often sufficient | Hydraulic side shift available as an option |
| Front mounting | This model is designed as a rear-mounted mower | Berti offers separate front-mounted mower ranges |
| Collection hopper / container | Mulch should decompose on the ground | Berti PICKER/R with collection hopper |
| Hammer flails (Y type) | M flails are more versatile and better suited to wood than Y flails | Berti TFB/Y (same range with Y flails) |
Frequently asked questions
What tractor power do I need for the 200 cm mower?
Berti recommends 70 to 150 hp for the entire range. For the 200 cm mower, you should have at least 80 to 90 hp to provide sufficient power reserves even in dense scrub. 70 hp is enough for mowing grass alone.
Can the mower also shred branches?
Yes. The Berti flail mower can handle woody material up to 12 cm in diameter. This includes vine prunings, orchard prunings, scrub and thin trunk remnants. A forestry mulcher is recommended for thicker wood.
What is the difference between M and Y flails?
M flails are versatile and shred both grass and woody material. Y flails (hammer flails) produce a finer finish when mowing grass alone, but are less effective on wood. Berti also offers the same range with Y flails (model TFB/Y).
Is the side shift hydraulic?
The side shift is mechanical as standard – it is adjusted manually before work begins. Berti offers hydraulic side shift as an option, which can be operated from the cab. Ask for the hydraulic version when ordering.
Will the mower fit my tractor?
The mower is mounted via an adjustable Category II three-point linkage. Your tractor must have rear linkage with a Category II three-point hitch and a 540 rpm PTO with a 1-3/8″ 6-spline profile. This is the case with most European tractors from 50 hp upwards.
How do I replace the flails?
Each of the 18 flails is attached individually to the rotor and can be replaced without removing the entire rotor. Use only genuine Berti type M flails (2.4 kg) to avoid rotor imbalance.