Battioni Pagani Vacuum pump Star60 MAV LF SX D80 STD, 10680 l/min
€2,260.05
Series/model:
Star
Drive:
1 3/8" 6 teeth
Speed (rpm):
1000
Direction of rotation:
left
Capacity (l/min):
10680
Connection (mm):
80
Version:
Star60 MAV LF SX D80 STD
Additional information:
Abbreviations:
LF: forced lubrication
LA: automatic lubrication
SX: left-hand rotation
DX: right-hand rotation
STD: standard vane
Longlife: heat-resistant vane
NORMAL LUBRICATION
Lubrication takes place only during the intake phase. The vacuum created in the rotary vane vacuum pump draws oil from the tank. During the compression phase, lubrication is provided by the oil remaining from the previous phase. Normal lubrication is used only on the MEC 1000 and MEC 1600 models, which are manufactured exclusively with this type of lubrication.
FORCED LUBRICATION (LF)
This is the standard version for slurry tankers. Lubrication takes place during both the intake and compression phases, using a gear pump fitted at the rear and driven by the rotor shaft. The gear pump draws oil from the tank and feeds it to the manually adjusted metering tap. Excess oil returns to the tank from the tap through a hose.
AUTOMATIC LUBRICATION (LA)
With this system, lubrication takes place during both the intake and compression phases using an adjustable-output metering piston pump fitted at the rear and driven by the rotor. Oil is injected directly into the rotary vane vacuum pump, eliminating the need for manual adjustment and ensuring significant oil savings.
Features of B&P vacuum pumps
M
The drive shaft (PTO) is driven by a propeller shaft at 540 rpm. This version can be identified by the gearbox housing on the front of the rotary vane vacuum pump, as well as by the identification plate and the marking on the upper part of the housing.
MA
The drive shaft (PTO) is driven by a propeller shaft at 1000 rpm. This version can be identified by the gearbox housing on the front of the rotary vane vacuum pump, as well as by the identification plate and the marking on the gearbox cover.
P
The drive shaft (PTO) is driven by a belt pulley and belt. This version can be identified by the cylindrical splined drive shaft and the identification plate: .... / P = belt pulley fitted.
D
The drive shaft (PTO) is driven by a propeller shaft connected directly to the press-fitted coupling. This version can be identified by the press-fitted coupling on the front of the rotary vane vacuum pump, as well as by the identification plate: .... / D = direct coupling.
H
The drive shaft (PTO) is driven by a hydraulic gear motor. This version can be identified by the hydraulic motor mount on the front of the rotary vane vacuum pump, as well as by the identification plate: .... / H = hydraulic drive.
HM
With gearbox for drive by hydraulic motor.
G
This version of rotary vane vacuum pump is fitted to the GARDA or LEDRA unit; it cannot be used on its own. The version can be identified by the external pinion on the front of the rotary vane vacuum pump and by the identification plate: ... / G = equipment for GARDA or LEDRA.
GA
This version of rotary vane vacuum pump is fitted to the GARDA or LEDRA unit at 1000 rpm; it cannot be used on its own. The version can be identified by the external pinion on the front of the rotary vane vacuum pump and by the identification plate: ... /GA = equipment for GARDA or LEDRA at 1000 rpm.
K
The drive shaft (PTO) is driven by a propeller shaft at 540 rpm and is designed to drive a Group 2 or Group 3 pump. This version can be identified by the hydraulic pump mount and the identification plate.
KA
The drive shaft (PTO) is driven by a propeller shaft at 1000 rpm and is designed to drive a Group 2 or Group 3 hydraulic pump. This version can be identified by the hydraulic pump mount, the identification plate and the marking on the upper part of the housing.
BALLAST
Cooling by air injectors during intake. Continuous pump operation is possible at -0.7 bar. BALLAST pumps are supplied as standard with heat-resistant vanes. Crash Protection System – the rotor drops down through the elongated holes if a blockage occurs. This minimises the risk of the housing breaking. Heat indicator.
Lubrication system:
Forced lubrication
Pressure relief safety valve:
2"
Vacuum valve:
1 1/2"
Warning:
Before commissioning, fill the compressor with oil 4055070200100 or 21088898 GEB5 and the gearbox with oil 210CLP460 GEB20.
Compressor supplied without safety valves!
Every pump undergoes a comprehensive final inspection at the factory, during which vacuum, compression and lubrication are checked, among other things.
A test report is produced for each pump and includes the pump’s serial number.
Weight:
10 g
| Artikelart: | Gerät / Maschine, Vakuumpumpen |
|---|---|
| Baureihe : | Star |
| Capacity (l/min.): | 10680, 10680 l/min |
| Connection (mm): | 80 |
| Direction of rotation: | Left, links |
| Drehzahl: | 1000 U/min |
| Drehzahl (U/min.): | 1000 |
| Drive type: | 1 3/8" 6 Zähne |
| Gerätetyp : | Vakuumpumpe |
| Passend für:: | Battioni Pagani |
| Product group: | Pumpentechnik |
| Pump type: | Star |
| Schmiersystem: | Zwangsschmierung |
| Schmiersystem : | Zwangsschmierung (LF) |
| Series/Model: | Star |
| Unterdruckventil: | 1 1/2" |
| Version: | Star60 MAV LF SX D80 STD |
| drive: | 1 3/8" 6 Zähne |
| Überdruck Sicherheitsventil: | 2" |