Battioni Pagani Vacuum pump MEC II 9000 G LF DX D80, 9030 l/min, Gear
€1,423.29
Series/model:
MEC
Drive:
Gear
Direction of rotation:
right
Capacity (l/min.):
9030
Connection (mm):
80
Version:
MEC II 9000 G LF DX D80 LONG LIFE
Additional information:
Abbreviations:
LF: forced lubrication
LA: automatic lubrication
SX: left-hand rotation
DX: right-hand rotation
STD: standard vane
Longlife: heat-resistant vane
NORMAL LUBRICATION
Lubrication takes place only during the intake phase. The vacuum created in the rotary vane vacuum pump draws oil from the tank. During the compression phase, lubrication is provided by the oil residue from the preceding phase. Normal lubrication is used only on models MEC 1000 and MEC 1600, which are manufactured exclusively with this type of lubrication.
FORCED LUBRICATION (LF)
This is the standard version for slurry tankers. Lubrication takes place during both the intake and compression phases, using a gear pump mounted at the rear and driven by the rotor shaft. The gear pump draws oil from the tank and feeds it to the manually regulated metering tap. Excess oil flows back into the tank from the tap through a hose.
AUTOMATIC LUBRICATION (LA)
With this system, lubrication takes place during both the intake and compression phases using an adjustable-output metering piston pump mounted at the rear and driven by the rotor. Oil is injected directly into the rotary vane vacuum pump, eliminating the need for manual adjustment and ensuring significant oil savings.
Features of B&P vacuum pumps
M
The drive shaft (PTO) is driven by a propeller shaft at 540 rpm. This version can be identified by the gearbox housing on the front of the rotary vane vacuum pump, as well as by the identification plate and the marking on the upper housing section.
MA
The drive shaft (PTO) is driven by a propeller shaft at 1000 rpm. This version can be identified by the gearbox housing on the front of the rotary vane vacuum pump, as well as by the identification plate and the marking on the gearbox housing cover.
P
The drive shaft (PTO) is driven by a belt pulley and belt. This version can be identified by the cylindrical splined drive shaft and the identification plate: .... / P = built-in belt pulley.
D
The drive shaft (PTO) is driven by a propeller shaft connected directly to the press-fitted coupling. This version can be identified by the press-fitted coupling on the front of the rotary vane vacuum pump, as well as by the identification plate: .... / D = direct coupling.
H
The drive shaft (PTO) is driven by a hydraulic gear motor. This version can be identified by the hydraulic motor mounting on the front of the rotary vane vacuum pump, as well as by the identification plate: .... / H = hydraulic power transmission.
HM
With gearbox for drive by hydraulic motor.
G
This version of the rotary vane vacuum pump is mounted on the GARDA or LEDRA unit; it cannot be used on its own. The version can be identified by the external pinion on the front of the rotary vane vacuum pump and by the identification plate: ... / G = equipment for GARDA or LEDRA.
GA
This version of the rotary vane vacuum pump is mounted on the GARDA or LEDRA unit at 1000 rpm; it cannot be used on its own. The version can be identified by the external pinion on the front of the rotary vane vacuum pump and by the identification plate: ... /GA = equipment for GARDA or LEDRA at 1000 rpm.
K
The drive shaft (PTO) is driven by a propeller shaft at 540 rpm and is designed to drive a Group 2 or Group 3 pump. This version can be identified by the hydraulic pump mounting and the identification plate.
KA
The drive shaft (PTO) is driven by a propeller shaft at 1000 rpm and is designed to drive a Group 2 or Group 3 hydraulic pump. This version can be identified by the hydraulic pump mounting, the identification plate and the marking on the upper housing section.
BALLAST
Cooling by air injectors during intake. Continuous pump operation is possible at -0.7 bar. BALLAST pumps are fitted with heat-resistant vanes as standard. Crash Protection System – thanks to the elongated holes, the rotor drops down if it becomes blocked. This minimises the risk of the housing breaking. Heat indicator.
Lubrication system:
Forced lubrication
Pressure safety valve:
2"
Vacuum valve:
1 1/2"
Warning:
Before commissioning, fill with compressor oil 4055070200100 or 21088898 GEB5 and fill the gearbox housing with 210CLP460 GEB20 oil.
Compressor supplied without safety valves!
Every pump undergoes a comprehensive final inspection at the factory, during which vacuum, compression and lubrication are checked, among other things.
A test report is produced for each pump and includes the pump’s serial number.
Weight:
10 g
| Artikelart: | Gerät / Maschine, Vakuumpumpen |
|---|---|
| Baureihe : | MEC |
| Capacity (l/min.): | 9030, 9030 l/min |
| Connection (mm): | 80 |
| Direction of rotation: | rechts, Right |
| Drive type: | Zahnrad |
| Gerätetyp : | Vakuumpumpe |
| Passend für:: | Battioni Pagani |
| Product group: | Pumpentechnik |
| Pump type: | MEC |
| Schmiersystem: | Zwangsschmierung |
| Schmiersystem : | Zwangsschmierung (LF) |
| Series/Model: | MEC |
| Unterdruckventil: | 1 1/2" |
| Version: | MEC II 9000 G LF DX D80 LONG LIFE |
| drive: | Zahnrad |
| Überdruck Sicherheitsventil: | 2" |