Skip to main content Skip to search Skip to main navigation
Menu

Battioni Pagani Vacuum pump BALLAST 13500 D LA SX ULD100, 13845 l/min

Description
Version:

PTO connection 1 3/8", Z6, 1000 rpm, anticlockwise
BALLAST 13500 D LA SX UL D100 Long Life br with air injector cooling

Drive:

1 3/8" 6 teeth

Capacity (l/min.):

13845

Speed (rpm):

1000

Direction of rotation:

anticlockwise

Lubrication system:

automatic lubrication

Connection (mm):

100

Pressure relief safety valve:

2"

Vacuum valve:

1 1/2"

Warning:

Before commissioning, fill with compressor oil 4055070200100 or 21088898 GEB5 and fill the gearbox with oil 210CLP460 GEB20.

Compressor supplied without safety valves!

Every pump undergoes a comprehensive final inspection at the factory, during which vacuum, compression and lubrication are checked, among other things.
A test report is produced for each pump, containing the pump's serial number.

Additional information:

Abbreviations:
LF: forced lubrication
LA: automatic lubrication
SX: anticlockwise
DX: clockwise
STD: standard vane
Longlife: heat-resistant vane

NORMAL LUBRICATION
Lubrication takes place only during the intake phase. The vacuum created in the rotary vane vacuum pump draws oil from the tank. During the compression phase, lubrication is provided by the oil remaining from the previous phase. Normal lubrication is used only on the MEC 1000 and MEC 1600 models, which are manufactured exclusively with this type of lubrication.

FORCED LUBRICATION (LF)
This is the standard version for slurry tankers. Lubrication takes place during both the intake and compression phases, using a gear pump mounted at the rear and driven by the rotor shaft. The gear pump draws oil from the tank and feeds it to the manually adjusted metering tap. Excess oil flows back from the tap to the tank through a hose.

AUTOMATIC LUBRICATION (LA)
With this system, lubrication takes place during both the intake and compression phases using an adjustable-output metering piston pump mounted at the rear and driven by the rotor. The oil is injected directly into the rotary vane vacuum pump, eliminating the need for manual adjustment and ensuring significant oil savings.

Features of B&P vacuum pumps

M
The drive shaft (PTO) is driven by a propeller shaft at 540 rpm. This version can be identified by the gearbox housing at the front of the rotary vane vacuum pump, as well as by the identification plate and the marking on the upper part of the housing.

MA
The drive shaft (PTO) is driven by a propeller shaft at 1000 rpm. This version can be identified by the gearbox housing at the front of the rotary vane vacuum pump, as well as by the identification plate and the marking on the gearbox housing cover.

P
The drive shaft (PTO) is driven by a belt pulley and belt. This version can be identified by the cylindrical splined drive shaft and the identification plate: .... / P = built-in belt pulley.

D
The drive shaft (PTO) is driven by a propeller shaft connected directly to the pressed-on coupling. This version can be identified by the pressed-on coupling at the front of the rotary vane vacuum pump, as well as by the identification plate: .... / D = direct coupling.

H
The drive shaft (PTO) is driven by a hydraulic gear motor. This version can be identified by the hydraulic motor mount at the front of the rotary vane vacuum pump, as well as by the identification plate: .... / H = hydraulic power transmission.

HM
With gearbox for drive by hydraulic motor.

G
This version of rotary vane vacuum pump is mounted on the GARDA or LEDRA unit; it cannot be used on its own. The version can be identified by the external pinion at the front of the rotary vane vacuum pump and by the identification plate: ... / G = equipment for GARDA or LEDRA.

GA
This version of rotary vane vacuum pump is mounted on the GARDA or LEDRA unit at 1000 rpm; it cannot be used on its own. The version can be identified by the external pinion at the front of the rotary vane vacuum pump and by the identification plate: ... /GA = equipment for GARDA or LEDRA at 1000 rpm.

K
The drive shaft (PTO) is driven by a propeller shaft at 540 rpm and is designed to drive a Group 2 or Group 3 pump. This version can be identified by the hydraulic pump mount and the identification plate.

KA
The drive shaft (PTO) is driven by a propeller shaft at 1000 rpm and is designed to drive a Group 2 or Group 3 hydraulic pump. This version can be identified by the hydraulic pump mount, the identification plate and the marking on the upper part of the housing.

BALLAST
Cooling by air injectors during intake. Continuous pump operation is possible at -0.7 bar. BALLAST pumps are fitted with heat-resistant vanes as standard. Crash Protection System – the rotor drops down through the elongated holes if it becomes blocked. This minimises the risk of the housing breaking. Heat indicator.

Series/model:

Ballast

Weight:

180,25 kg

Product description

Ballast/D compressor, speed 1000 rpm, with direct drive

• Direct drive without gearbox
• Drive: 1 3/8" 6 teeth
• Anticlockwise rotation
• Compressors supplied without safety valve!
• Longlife vanes
• Heat indicator

Properties
Artikelart: Gerät / Maschine, Vakuumpumpen
Baureihe : Ballast
Capacity (l/min.): 13845, 13845 l/min
Connection (mm): 100
Direction of rotation: Left, links
Drehzahl: 1000 U/min
Drehzahl (U/min.): 1000
Drive type: 1 3/8" 6 Zähne
Gerätetyp : Vakuumpumpe
Passend für:: Battioni Pagani
Product group: Pumpentechnik
Pump type: Ballast
Schmiersystem: automatischer Schmierung
Schmiersystem : automatische Schmierung (LA)
Series/Model: Ballast
Unterdruckventil: 1 1/2"
drive: 1 3/8" 6 Zähne
Überdruck Sicherheitsventil: 2"