Skip to main content Skip to search Skip to main navigation
Menu

Battery Powerwinch 1200 B

Description

Scope of delivery

  • 1 × battery-powered capstan winch with STIHL battery motor
  • Rope brake

⚠ Not included: battery, charger and rope – see note in the text.

Technical data

FeatureValue
ManufacturerEDER Maschinenbau
Product typePortable battery-powered capstan winch
MotorSTIHL battery motor
Power1,7 kW / 2,3 PS
Permissible direct pulling force1.200 kg
Permissible pulling force with pulley2.400 kg
Average rope speed0,22 m/s (approx. 13 m/min)
Rope diameter9,5 – 10 mm
Battery runtime15 – 20 minutes at maximum load
Weightapprox. 12 kg
BrakeAutomatic rope brake
DriveCentrifugal clutch
Battery and chargernot included

Product description

EDER battery-powered capstan winch – 1.200 kg pulling force at a weight of 12 kg

This winch is the battery-powered version of EDER's portable capstan winches – developed in collaboration with STIHL.

The key selling point: 12 kg weight with 1.200 kg pulling force

The manufacturer puts it succinctly: The winch pulls more than 90 times its own weight.

Why this ratio determines where it can be used:

The winch is carried to the work site, not driven there. At 12 kg, one person can carry it – over root plates, through dense woodland and across ditches.

It can reach places inaccessible to vehicles. This is crucial when extracting timber on steep or difficult terrain.

Used with a synthetic rope, the entire set-up can be carried by hand – a steel rope with the same breaking load would weigh many times more.

No need to reposition machinery. When the pulling direction changes, simply move the winch and attach it again.

Battery power – what changes compared with petrol

EDER winches are also available with petrol engines. The battery-powered versions offer their own advantages over these models:

Ready to start immediately. No pull-starting, no choke and no carburettor that plays up after being left unused.

No need to carry fuel. No mixing fuel, no canister in your rucksack and no fuel left in the tank over winter.

Significantly quieter. When working near homes, in parks and in cemeteries, this is often essential for the job to be possible at all.

No exhaust fumes. A safety benefit in enclosed spaces, sheds and ditches – a petrol engine cannot be used there.

Less maintenance. No oil changes, air filters or spark plugs.

Lower weight. Without a fuel tank and exhaust system, the winch is lighter.

⚠ The trade-off with battery power: runtime

This is something you need to understand before buying.

The manufacturer states it openly: 15 to 20 minutes at maximum load.

What this means in practice:

This is actual pulling time at full load – not working time. Between pulls, the rope is attached, the winch repositioned and the rope redirected – the motor is not running during this time.

In practice, one battery charge lasts considerably longer than 20 minutes of working time – how long depends on the ratio of pulling time to set-up time.

Runtime increases with lighter loads – the stated figure is for full load.

⚠ What this means when buying: a second battery is practically essential. A charged spare battery can be swapped in seconds, while a flat one needs time to recharge – and there are no power sockets in the forest.

For a full day's work, allow for three or more batteries – or a charger in the vehicle.

⚠ Battery and charger are not included

This is the most important point before placing your order.

The manufacturer explicitly states that the battery must be purchased directly from STIHL.

What this means:

If you already use STIHL battery-powered tools, you can use your existing batteries – this is the cost-saving advantage of this solution.

If you are new to the system, you will need to buy the battery and charger separately – factor this into your price calculation.

Check which battery type is suitable. The manufacturer lists sets with the STIHL AP 500 S – check which batteries are suitable before ordering.

If you order the winch without a suitable battery, you will have a machine that will not run.

The rope brake – a key safety feature

The manufacturer highlights it: Maximum safety thanks to the rope brake.

How it works: As soon as the operator releases the rope, the winch stops and the rope is clamped by the brake.

Why this is crucial on a capstan winch:

A capstan winch has no drum. The rope runs over the capstan and is kept under tension by the operator – if released, the load would slip back without a brake.

The most dangerous moment is when the load shifts. A log gets caught and the operator reaches to adjust it, corrects its position – at that moment, the load must not slip back.

The brake prevents the load from slipping back unintentionally – while still allowing the operator to lower the load deliberately.

That is the practical benefit: The load is held automatically and lowered only when intended.

Operation from outside the danger zone

This is a feature that affects workplace safety.

The manufacturer describes it as follows: the winch is controlled from outside the danger zone. A light pull on the rope moves the throttle lever on the control unit and starts the winch pulling.

Why this is a significant safety benefit:

The operator does not stand next to the winch, but by the rope – to the side of the pulling direction.

If the rope breaks, the danger zone is along the line of pull. Anyone not standing there is out of danger.

The rope itself controls the winch – no extra cable and no battery-powered radio remote control.

The operator can see the load and can react immediately.

The centrifugal clutch adds to this: as soon as the throttle is released, the capstan stops.

1.200 kg direct, 2.400 kg with a pulley

Using a pulley doubles the pulling force – at the expense of speed and rope length.

How it works: The rope runs from the winch to a pulley attached to the load and back to an anchor point. The load is supported by two sections of rope – each carries half the load, so the winch only has to provide half the force.

The trade-off:

Half the speed. The load moves at half the speed of the rope.

Twice the rope length. A 40-metre rope is needed for a 20-metre pull.

Additional equipment: pulley, shackle and a suitable anchor point.

When is it worth the extra effort? For heavy logs, uphill pulls and loads that have become snagged – whenever 1.200 kg is not enough.

Rope speed: 0,22 m/s

Around 13 metres per minute when pulling directly.

What this means in practice: A 20-metre pull takes just over a minute and a half.

With a pulley, the speed is halved – around 6 to 7 metres per minute.

This is a suitable speed for capstan winches: It needs to be slow enough for the operator to guide the rope under control – a faster winch would be dangerous with this method of operation.

9,5 to 10 mm rope – the benefits of synthetic rope

The manufacturer expressly recommends lightweight synthetic ropes.

Why synthetic rather than steel:

Weight. One person can carry a 100-metre synthetic rope – not a steel rope with the same breaking load.

Handling. It does not unlay, has no protruding wires and poses no risk of hand injuries.

Floats – useful when working near water.

Does not rust.

⚠ Things to bear in mind: Synthetic ropes are susceptible to abrasion on edges and UV exposure. Check them before every use and store them protected from damage.

The manufacturer offers suitable ropes – in 50, 100 and 200 metres, with a breaking load of 3.600 daN at 9,5 mm.

⚠ Rope not included – it must be purchased separately.


Things to bear in mind

⚠ Battery and charger are not included. The battery must be purchased directly from STIHL. Check which battery type is suitable before ordering – if you order the winch without a suitable battery, you will have a machine that will not run.

⚠ Allow for a second battery. 15 to 20 minutes at maximum load – a charged spare battery can be swapped in seconds, while a flat one needs time to recharge, and there are no power sockets in the forest.

⚠ Rope not included. Suitable rope diameter: 9,5 to 10 mm.

Use for ground pulling only. The capstan winch is designed for pulling loads along the ground – not for lifting loads.

Keep the danger zone clear. If the rope breaks, the line of pull is the danger zone – no one must be in it.

Check the rope before every use – for abrasion, damage and deformation. Synthetic ropes are susceptible to abrasion on edges and UV exposure.

Check the slings and anchor point – a pulley arrangement places considerable forces on the anchor point.

Check that the rope brake works correctly.

Keep the battery warm in cold weather. Lithium-ion batteries lose capacity in freezing conditions.

Secure the winch firmly – it must be able to withstand the pulling force.

Wear personal protective equipment in accordance with forestry work requirements.

Ensure that operators are properly trained. Forestry winch work is subject to specific training and instruction requirements.

The relevant accident prevention regulations apply; these include, among others, the requirements of the Social Insurance for Agriculture, Forestry and Horticulture.


Typical applications

Forestry and timber extraction, firewood production, woodland owners and self-employed firewood collectors, difficult and steep terrain, tree care and felling, landscaping, areas near homes and parks, cemeteries, recovery and extraction work, use where vehicles cannot gain access.


Frequently asked questions

What makes this winch special?
The ratio of weight to pulling force. The manufacturer puts it this way: The winch pulls more than 90 times its own weight. At 12 kg, one person can carry it – over root plates, through dense woodland and across ditches. It can reach places inaccessible to vehicles – crucial when extracting timber on difficult terrain.

What are the advantages of battery power over petrol?
Ready to start immediately – no pull-starting and no carburettor that plays up after being left unused. No need to carry fuel. Significantly quieter – often essential when working near homes, in parks and in cemeteries. No exhaust fumes – a safety benefit in enclosed spaces and ditches. It also requires less maintenance and weighs less.

⚠ Is 15 to 20 minutes of runtime enough?
This is actual pulling time at full load – not working time. Between pulls, the rope is attached, the winch repositioned and the rope redirected – the motor is not running during this time. In practice, one battery charge lasts considerably longer than 20 minutes of working time. Runtime increases further with lighter loads.

Do I need a second battery?
Practically speaking, yes. A charged spare battery can be swapped in seconds, while a flat one needs time to recharge – and there are no power sockets in the forest. For a full day's work, allow for three or more batteries or a charger in the vehicle.

⚠ Are the battery and charger included?
No. The battery must be purchased directly from STIHL. If you already use STIHL battery-powered tools, you can use your existing batteries – this is the cost-saving advantage of this solution. If you are new to the system, you will need to buy both separately and factor them into your price calculation.

How does the rope brake work?
As soon as the operator releases the rope, the winch stops and the rope is clamped by the brake. Why this is crucial: a capstan winch has no drum – the rope runs over the capstan and is kept under tension by the operator. Without a brake, the load would slip back. The most dangerous moment is when the load shifts: a log gets caught and the operator reaches to adjust it – at that moment, the load must not slip back. The load can still be lowered deliberately.

How is the winch operated?
From outside the danger zone. A light pull on the rope moves the throttle lever on the control unit and starts the winch pulling. The operator stands by the rope, not next to the winch – to the side of the line of pull. If the rope breaks, the line of pull is the danger zone – anyone not standing there is out of danger.

How do I achieve 2.400 kg of pulling force?
By using a pulley. The rope runs from the winch to a pulley attached to the load and back to an anchor point – the load is supported by two sections of rope, each carrying half the load. The trade-off: half the speed and twice the rope length – a 40-metre rope is needed for a 20-metre pull. You will also need a pulley, shackle and a suitable anchor point.

When is using a pulley worthwhile?
For heavy logs, uphill pulls and loads that have become snagged – whenever 1.200 kg is not enough.

How fast does the winch pull?
0,22 m/s, or around 13 metres per minute when pulling directly – a 20-metre pull takes just over a minute and a half. With a pulley, the speed is halved. This is suitable for capstan winches: the winch needs to be slow enough for the operator to guide the rope under control.

What rope do I need?
9,5 to 10 mm. The manufacturer recommends lightweight synthetic ropes – one person can carry a 100-metre synthetic rope, but not a steel rope with the same breaking load. It also does not unlay, has no protruding wires, floats and does not rust. ⚠ Synthetic ropes are susceptible to abrasion on edges and UV exposure – check before every use and store protected from damage. The rope is not included.

Can I use the winch to lift loads?
No. The capstan winch is designed exclusively for pulling loads along the ground.

Properties
Akku-Laufzeit: 15 - 20 Minuten bei maximaler Last
Artikelart: Kunststoffwindenseile und Zubehör
Motor: Stihl Akkumotor
Motor (kW/PS): 1,7 / 2,3
Product group: Maschinelle Holzernte
für Seil-Ø (mm): 9,5 - 10
mittlere Seilgeschwindigkeit (m/s): 0,22
zul. Zugkraft direkt (kg): 1200
zul. Zugkraft umgelegt (kg): 2400