APV Maschinenträger MT2 Dünger mit Fanghaken, Kat. 3, 300 kg
€4,830.00
Scope of delivery
- 1 × APV MT2 M1 fertiliser implement carrier with Category 3 hook ends (tractor side)
- Basic frame with access platform
- 3 rolls of hose bundle (25 m each)
Note: The pneumatic seeder (PS fertiliser edition) is not included in the scope of delivery and must be ordered separately.
Technical data
| Design | Implement carrier for three-point linkage mounting |
|---|---|
| Model | MT2 M1 fertiliser |
| Variant | Fertiliser – corrosion-protected for mineral fertilisers and microgranules |
| Transport dimensions (without seeder) | H 135 × W 195 × D 145 cm |
| Weight (without seeder) | 300 kg |
| Tractor-side mounting | Category 3 hook ends |
| Implement-side mounting | Three-point linkage Cat. 2, 3 or 4 (please specify when ordering) |
| 120 l | PS 120 M1 D |
|---|---|
| 200 l | PS 200 M1 D |
| 300 l | PS 300 M1 D |
| 500 l | PS 500 M2 D |
| 800 l | PS 800 M1 D |
The standard edition (PS 120 M1 to PS 1600 M1 without the D suffix) is not suitable for fertiliser – it has no corrosion protection.
Product description
What the implement carrier does – and why you need one
The APV MT2 implement carrier is an intermediate frame mounted on the tractor's three-point linkage. The pneumatic seeder (APV PS series) sits on the frame; the soil-working implement – cultivator, disc harrow, roller or strip-till share – is coupled behind the frame to the implement-side three-point linkage.
Without an implement carrier, the seeder must be mounted directly on the soil-working implement. This has three disadvantages:
| Issue | Without MT2 | With MT2 |
|---|---|---|
| Weight on the implement | The seeder and fertiliser load the implement frame – with a fully loaded PS 800 M1 D, this can quickly add over 1,000 kg | The weight is carried by the tractor's rear axle – better traction and less strain on the frame |
| Changing implements | The seeder must be removed and refitted every time you change implements | The seeder stays on the MT2; only the hose routing and distribution plates need changing |
| Using the implement on its own | The implement cannot be used without the seeder while it is mounted | The implement can be uncoupled immediately and used on its own |
The MT2 turns any compatible soil-working implement into a seeding combination without modifying the implement itself. Only hose routing and distribution plates are needed on the implement; the entire seed or fertiliser supply, the blower and the metering unit remain on the implement carrier.
The fertiliser variant
Mineral fertilisers – particularly calcium ammonium nitrate (CAN), urea and liquid microgranules – attack unprotected steel surfaces and seals. The fertiliser edition of the APV PS seeders is therefore fully corrosion-protected: the hopper, metering roller, distributor and all surfaces in contact with fertiliser.
The MT2 fertiliser is the matching implement carrier variant. It ensures that the frame and the contact surfaces between the seeder and carrier can also withstand corrosive materials. If you use a PS with the D suffix, you need the MT2 fertiliser version – not the standard MT2.
Category 3 hook ends – what this means
Hook ends are hook-shaped quick couplings on the tractor-side lower link mounting. Instead of inserting the lower link pins one by one, the tractor reverses up to the implement, the lower link balls slide into the hook ends and a locking mechanism secures them.
Category 3 (to ISO 730) fits tractors with lower link ball diameters of approx. 36.5 mm – typically machines from around 80–185 kW (110–250 hp). This is the power range in which most cultivator/disc harrow and seeder combinations are used.
| Category | Lower link pin diameter | Tractor power (guide value) |
|---|---|---|
| Cat. 1 | 22.1 mm | up to approx. 35 kW (48 hp) |
| Cat. 2 | 28.7 mm | approx. 30–75 kW (41–102 hp) |
| Cat. 3 | 36.5 mm | approx. 80–185 kW (110–250 hp) |
| Cat. 4 | 51.0 mm | over 185 kW (252 hp) |
Cat. 3 is not backwards-compatible: If your tractor has Cat. 2 lower links, you cannot use these hook ends. In that case, you need the MT2 with Cat. 2 hook ends or a pin mounting with reducing bushes.
Combination examples
| Application | Seeder on MT2 | Implement on MT2 | Result |
|---|---|---|---|
| Fertilising at sowing | PS 300 M1 D with granular fertiliser | Cultivator or disc harrow | Under-root fertiliser application in a single pass with soil cultivation |
| Cover crop + fertiliser | PS 500 M2 D with 2 chambers | Cultivator + roller | Seed and fertiliser applied simultaneously in separate rows |
| Winter cereal sowing | PS 800 M1 D | Strip-till share | Band placement of seed and starter fertiliser in loosened strips |
For heavy fertilisers (with a high specific weight), APV recommends the hydraulic blower instead of the electric one – it delivers the higher airflow needed to pneumatically convey the heavier material.
Optional accessories
- Ball-head mounting kit – for coupling implements with a ball hitch
- Drawbar eye kit – for trailer-coupled implements
- Lower link lift kit – for implement-side lift control
- Cable and hose extension kit – extensions for 3 double-acting control valves (BG3), compressed air supply, control lines and 7-pin lighting cable
- Hose extension for 4th double-acting control function
- Hose extension for load-sensing line (LS)
- Hose extension for unpressurised return line
Frequently asked questions
What is an implement carrier?
An intermediate frame mounted on the tractor's three-point linkage. It carries the pneumatic seeder, keeping additional weight off the soil-working implement. The weight of the seeder and fertiliser is carried by the tractor's rear axle – improving traction and reducing strain on the implement frame.
Do I need the MT2, or can I mount the seeder directly on the cultivator?
Either is possible. Direct mounting is simpler if you have just one implement that will remain permanently combined with the seeder. The MT2 is worthwhile if you switch between several implements, if the implement cannot withstand the additional load, or if you need better traction from increased rear axle load.
What are hook ends, and why Category 3?
Hook ends are hook-shaped quick couplings on the tractor-side lower link mounting. They allow you to couple and uncouple without manually inserting pins. Category 3 fits tractors with lower link balls of approx. 36.5 mm, typically from 110 hp upwards. If your tractor has Cat. 2 lower links, you need the corresponding MT2 variant.
Which PS seeders fit the MT2 fertiliser?
All APV pneumatic seeders in the fertiliser edition: PS 120 M1 D, PS 200 M1 D, PS 300 M1 D, PS 500 M2 D and PS 800 M1 D. The standard edition (without the D suffix) is not suitable for fertiliser because it lacks corrosion protection.
What about the implement-side three-point linkage mounting?
The MT2 has its own three-point linkage mounting at the rear, to which the soil-working implement is coupled. The category of the implement-side mounting must match the implement and is configured when ordering – Cat. 2, 3 or 4 are available.