Skip to main content Skip to search Skip to main navigation
Menu

Alö VL+ Volume bucket 200 BOH M24

Skip product gallery

Aufnahmen

Montagehalterung, Metall, schwarz, Befestigungslöcher, Querstrebe
Alö Quicke Aufnahme BoH M24 Bobcat/FDI/MF Q
Prod. no.: ALO-11255307Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterung, Metall, Schwarz, Lochplatte, Befestigungswinkel
Alö Quicke Aufnahme BoH M24 CATERPILLAR TELEHANDLER
Prod. no.: ALO-11255269Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterung, Stahlhalter, schwarz, Lochplatten, Verstrebung
Alö Quicke Aufnahme BoH M24 CNH LM Q
Prod. no.: ALO-11255511Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterung, Metallhalter, schwarz, Lochplatten, Gelenkhalterung
Alö Quicke Aufnahme BoH M24 Claas Scorpion Q
Prod. no.: ALO-11255663Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Quicke-Logo, Schwarze Schrift, Wortmarke
Alö Quicke Aufnahme BoH M24 Dieci Medium Q
Prod. no.: ALO-11255265Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterung, Metallhalter, schwarz, Lochplatten, Wandhalterung
Alö Quicke Aufnahme BoH M24 Dieci Small Q
Prod. no.: ALO-11255271Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagewinkel, Metallhalter, Schwarz, Vorgebohrte Löcher, Befestigungsschrauben
Aufnahme Alö Quicke DIY BoH M24 Satz
Prod. no.: ALO-11256823Q
Hersteller:

Regular price: €450.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Metallhalterungen, verstellbar, schwarz, Lochplatten, Entriegelungshebel
Aufnahme Alö Quicke BoH M24 Euro
Prod. no.: ALO-11255468Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagewinkel, Metallhalterung, schwarz, vorgebohrte Löcher, Wandhalterung
Aufnahme Alö Quicke BoH M24 JCB Q-fit Q
Prod. no.: ALO-11255311Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stahlhalter,  Wandhalterung,  Regalträger,  Metallständer,  Befestigung
ALÖ Quicke Mounting bracket BoH 80x80 JCB TC Compact A
Prod. no.: ALO-11255141A
Hersteller:

Regular price: €410.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Quickie-Logo, Schriftzug, schwarz
Aufnahme Alö Quicke BoH M24 Kramer High Q
Prod. no.: ALO-11255413Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Quickie-Logo, Schwarzer Schriftzug, Markenlogo, Kursive Schrift
Aufnahme Alö Quicke BoH M24 Kramer Short Q
Prod. no.: ALO-11255274Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalter, Befestigungswinkel, schwarzer Kunststoff, Lochplatte, Verstärkungsrippen
Aufnahme Alö Quicke BoH M24 MX Q
Prod. no.: ALO-11255121Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Quicke-Logo, schwarzer Schriftzug, Wortmarke, weißer Hintergrund
Aufnahme Alö Quicke BoH M24 Manitou MLT Q
Prod. no.: ALO-11255308Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterung, Metallrahmen, schwarz, Befestigungslöcher, verstellbare Halterung
Aufnahme Alö Quicke BoH M24 Merlo ZM2 Q
Prod. no.: ALO-11255570Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Befestigungshalter, Metall, schwarz, Montagewinkel, Lochbohrungen
Aufnahme Alö Quicke BoH M24 Pin and Cone Q
Prod. no.: ALO-11255306Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Quickie-Logo, schwarzer Schriftzug, weißer Hintergrund
Aufnahme Alö Quicke BoH M24 SMS Q
Prod. no.: ALO-11255124Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterung, Metallhalter, schwarz, Lochblech, Doppelpack
Aufnahme Alö Quicke BoH M24 Schäffer Typ KR Q
Prod. no.: ALO-11255263Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterungen, Metall, schwarz, Lochplatten, orange Gelenke
Aufnahme Alö Quicke BoH M24 Volvo BM für Telelader Q
Prod. no.: ALO-11255354Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterung, Metall, Schwarz, Lochplatte, Gelenkhalterung
Aufnahme Alö Quicke BoH M24 Volvo BM Large Q
Prod. no.: ALO-11255310Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Montagehalterung, Metallhalterung, schwarz, Lochplatte, Befestigungswinkel
Aufnahme Alö Quicke BoH M24 Weidemann HT (Standard)
Prod. no.: ALO-11255264Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Metallhalterung, Montagewinkel, schwarz, Lochplatten, orange Schutzauflagen
Aufnahme Alö Quicke BoH M24 Zettelmeyer 602 - Standard 6°
Prod. no.: ALO-11255270Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Regalhalterungen, Metall, schwarz, Lochplatten, 2er-Set
Aufnahme Alö Quicke BoH M24 Zettelmeyer 602 - JCB
Prod. no.: ALO-11255470Q
Hersteller:

Regular price: €525.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Skip product gallery

Optionen

AUFPREIS Quicke Wendemesser HB500 für GM+, GL+, GXL+, VL+, SM+ 200
Prod. no.: QUI-11255494Q
Hersteller:

Regular price: €420.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Wendemesser gezackt für GM+, GL+, GXL+, VL+, SM+ 200
Prod. no.: QUI-11255501Q
Hersteller:

Regular price: €442.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Wendemesser Kunststoff 200
Prod. no.: QUI-11257165Q
Hersteller:

Regular price: €595.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schürfleisten-Stopfen M+ bis XL+ 23,4 mm, 18 Stück
Prod. no.: QUI-11256497Q
Hersteller:

Regular price: €21.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Rieselschutz für VL+
Prod. no.: QUI-11257000Q
Hersteller:

Regular price: €174.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Überlaufschutz L und XL
Prod. no.: QUI-11256106Q
Hersteller:

Regular price: €174.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Sichtschlitzabdeckung aus Metall
Prod. no.: QUI-11257115Q
Hersteller:

Regular price: €97.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Wall Saver Kit für VM+, VL+, VXL+
Prod. no.: QUI-11257162Q
Hersteller:

Regular price: €242.25
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Ladeschaufel, Metall, grau, orange Schutzgitter, Frontlader-Anbaugerät
AUFPREIS Alö Quicke Gitteraufsatz für VL+ 200-220
Prod. no.: ALO-11256999Q
Hersteller:

Regular price: €370.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Scope of delivery

  • 1 × volume bucket, size model 200, prepared for the bolted BoH M24 hook system
  • Bolt-on reversible cutting edge, 150 × 20 mm, hardened to 500 HB
  • Viewing slots in the back of the bucket, supplied as standard with transparent polycarbonate

Not included and essential: the BoH M24 hook set to suit your telehandler. The bucket cannot be fitted without it. Tell us your machine and attachment interface and we’ll include the correct set.

Please note: BoH M24 and BoH M16 are two different systems. Existing M16 hooks will not fit. If you already use Alö equipment with M16 hooks – such as an M-class universal bucket – please contact us before ordering.

Technical data

TypeVolume bucket, geometry optimised for telehandlers
Size model200
Working width1.960 mm
Overall width2.000 mm
Depth1.770 mm
Working depth1.630 mm
Height1.180 mm
Struck volume2,0 m³
Heaped volume2,4 m³
Max. bulk density of load1.000 kg/m³
Cutting edge150 × 20 mm, 500 HB, bolt-on reversible cutting edge
Viewing slotsstandard, polycarbonate (steel plate available as an accessory)
Attachment interfaceprepared for bolted BoH M24 hook system (hook set sold separately)
Weight655 kg
Recommended carrier vehiclesTelehandlers with 3 to 5,5 t lifting capacity
Other widths220, 240, 260

Product description

This volume bucket holds 2,4 m³ when heaped and is not simply a large bucket, but a bucket designed specifically for telehandlers. That is an important difference, and it comes down to one figure: 1.630 mm working depth.

Why the long bucket floor makes all the difference on a telehandler

Telehandlers have a limited rollback angle – they cannot roll an attachment back as far as a front loader or wheel loader. With a normally proportioned bucket, this means you can fill it, but when lifting and travelling some material spills out over the top. With free-flowing material such as grain, that is no small amount.

The manufacturer’s answer is a bucket floor that is considerably longer in relation to its height: 1.630 mm working depth at a height of 1.180 mm. By comparison, a universal bucket of the same width has a working depth of around 1.045 mm, so this bucket is 56 % deeper. This keeps the load flatter and further back, where it belongs, even with a telehandler’s limited rollback angle. In addition, specially developed hook sets provide the best possible crowd and dump angles for the leading telehandler brands.

The result: you can make full use of the bucket when handling grain – rather than only filling it three-quarters full, as is usually the case with a bucket not designed for a telehandler.

We should also be clear about the trade-off of the long floor: A working depth of 1,63 m moves the load centre a long way forwards. Your loader’s rated capacity applies at a 500 mm load centre – so the load chart for your machine with this attachment is what matters, not the rated figure on the data plate. Tell us your machine model and lifting capacity and we’ll work it out with you.

2,4 m³ is a volume – density sets the limit

The manufacturer specifies a clear upper limit: max. bulk density 1.000 kg/m³. This calculation shows what that means for your material – the total load includes the bucket’s own weight of 655 kg:

MaterialApprox. bulk densityLoad at 2,4 m³Total load on loader
Freshly fallen snow100 kg/m³240 kg895 kg
Sawdust200 kg/m³480 kg1.135 kg
Wood chips225 kg/m³540 kg1.195 kg
Grass silage650 kg/m³1.560 kg2.215 kg
Rapeseed680 kg/m³1.630 kg2.285 kg
Grain750 kg/m³1.800 kg2.455 kg
Cattle manure800 kg/m³1.920 kg2.575 kg
Manufacturer’s limit1.000 kg/m³2.400 kg3.055 kg
Damp soil1.450 kg/m³not permitted – exceeds the density limit
Gravel and sand1.650 – 1.800 kg/m³not permitted – exceeds the density limit

Soil, gravel, sand and construction rubble must not be handled with this bucket – this is a manufacturer’s limit, not a recommendation. Heavy-duty buckets are available for these materials; they are shorter, narrower and more robust. Tell us what you need to load and we’ll recommend the right bucket, even if it is a different one from this.

What lifting capacity do you really need?

The manufacturer recommends machines with a lifting capacity of 3 to 5,5 t. The table above shows that the right capacity depends on the material:

  • 3 t is easily enough for wood chips, sawdust, snow and biomass – the total load is under 1,2 t.
  • For grain the total load is 2.455 kg. This is within the nominal capacity of a 3 t loader, but with the load centre so far forwards at a working depth of 1,63 m, you will be working at the limit. From 4 t upwards, there is plenty of capacity.
  • At the density limit of 1.000 kg/m³ the filled bucket weighs 3.055 kg – more than a 3 t loader can nominally lift. You will need at least 4 t, preferably 5 t.

In short: At the lower end, lifting capacity is the limiting factor; at the upper end, it is density. In all cases, the load chart for your machine with this attachment is what matters.

Viewing slots: see what you are loading

Like all Quicke “+” volume buckets, this bucket comes with viewing slots in the back as standard, backed with transparent polycarbonate. On a 1,63 m-deep bucket fitted to a telehandler, this is not just a comfort feature: from the driver’s seat, you can see how full the bucket is and judge your approach to the pile. Without this, you either stop too soon and only half-fill the bucket, or go too far and push the material ahead of you.

The viewing slots are also available with steel plates as an accessory. This is the right choice if the bucket is used hard and often – free-flowing grain will gradually dull polycarbonate, which can also break under impact. Steel lasts, but it removes the very advantage the viewing slots are designed to provide. Polycarbonate is the right choice for most users.

Accessories that really make a difference

AccessoryWhat it doesWhen it is worthwhile
Grain guardSeals the first third and the transition from the reversible cutting edge to the scraper bar against grain leakageEssential for grain handling – prevents grain from spilling out underneath
Mesh extensionExtension across the full bucket width, open design, with side wings to reinforce the structureFor biomass, wood chips and sawdust – retains light material while keeping visibility clear
L–XL spill guardPrevents spillage backwards over the attachment carrierWhen loading high silos and reception pits, where the bucket is tilted well back
Wall Saver HDPEPlastic skids that let you work close to a concrete wallGrain stores, silo floors and drive-over silos – protects the wall and bucket
Reversible cutting edge options500 Brinell replacement, serrated edge, HDPE plasticSerrated for rolled silage and solid manure; HDPE for concrete and shed floors

The reversible cutting edge is bolted on and reversible: when one side is worn, turn it over and carry on with the fresh edge. This doubles its service life, and it can be changed on the farm with a spanner, without welding equipment.

Which width is right for your machine?

The bucket is available in four widths: 200, 220, 240 and 260. Choose according to the width of your machine; the manufacturer gives clear guidance:

  • The wider models suit the width of most telehandlers. This is the usual choice.
  • The narrower models are a good fit for articulated telehandlers, which are often narrower, even when fitted with wider agricultural tyres.

The basic rule remains: the bucket should be slightly wider than the tyre track, otherwise you will drive through your own material on every pass. Tell us your machine and tyre size and we’ll advise which of the four widths is right.

The M24 hook system: one bucket, many telehandlers

The bucket is supplied with the flexible M24 BoH system and can therefore be used on all common telehandlers on the market – it is the hook set, not the bucket, that provides the fit. The practical advantage is that if you change machines, you replace the hooks, not the bucket. Welded attachment interfaces cannot offer this.

The hook set is not included and must be ordered to suit your machine. And once again, because this is the most common mistake: M24 is not M16. M24 is for the carrier class of telehandlers, wheel loaders and large front loaders; M16 is for the class below. Existing M16 hooks will not fit.

Frequently asked questions

How much can I load into the bucket?

2,4 m³ heaped or 2,0 m³ struck, with a maximum permitted bulk density of 1.000 kg/m³. This gives around 540 kg for wood chips, 1.800 kg for grain and 2.400 kg at the density limit. Including the bucket’s own weight of 655 kg, that is up to 3.055 kg on the loader.

Can I use it to load soil, gravel or sand?

No. The manufacturer limits bulk density to 1.000 kg/m³; soil is around 1.450, gravel 1.650 and sand 1.800 kg/m³. These materials are not permitted with this bucket. You will need a heavy-duty bucket for them – tell us what you need to load and we’ll recommend the right one.

What lifting capacity does my telehandler need?

The manufacturer recommends 3 to 5,5 t, and the right capacity depends on the material: 3 t is easily enough for wood chips and biomass. For grain, the total load is 2.455 kg – within the nominal capacity of a 3 t loader, but 4 t or more gives you plenty of capacity. At the density limit of 1.000 kg/m³, the load is 3.055 kg, so you need at least 4 t. The load chart for your machine with this attachment is what matters.

Why is the bucket so deep?

Because telehandlers have a limited rollback angle. A bucket floor that is longer in relation to its height – here, 1.630 mm working depth at a height of 1.180 mm – keeps the load in place even when the bucket cannot be rolled back very far. Specially developed hook sets also provide the best possible crowd and dump angles for the leading telehandler brands. This is why the bucket can be used to its full capacity when handling grain.

Is the hook set included?

No. The bucket is prepared for the bolted M24 BoH system, and the hook set must be ordered separately to suit your machine. The bucket cannot be fitted without it. Existing M16 hooks will not fit – M24 is for the heavier carrier class.

What else do I need for handling grain?

The grain guard. It seals the first third of the bucket and the transition from the reversible cutting edge to the scraper bar against grain leakage, preventing grain from spilling out underneath. It is practically essential for grain handling – without it, you lose material on every pass and end up with it all over the yard.

Are the viewing slots made of plastic or steel?

They are supplied as standard with transparent polycarbonate, so you can see from the driver’s seat how full the bucket is. Steel plates are available as an accessory – useful for heavy, continuous use, as free-flowing grain can dull polycarbonate and impact can cause it to break. However, you will lose the visibility the slots are there to provide.

Which width should I choose?

The bucket should be slightly wider than your machine’s tyre track; otherwise, you will drive through your own material. The wider models (240, 260) suit the width of most telehandlers, while the narrower models (200, 220) are also a good fit for articulated telehandlers, which are often narrower. Tell us your machine and tyre size and we’ll check which one is right for you.

How long does the cutting edge last?

It depends on the surface – but it lasts twice as long as many people expect: the reversible cutting edge is bolted on and reversible. When one side is worn, unbolt it, turn it over and carry on with the fresh edge. Options include a 500 Brinell replacement, a serrated edge for rolled silage and solid manure, and HDPE plastic for concrete and shed floors.

Properties
Gerätetyp : Volumenschaufel
Recording: BoH
Working width: 2.00m