ALÖ Quicke Silage cutting bucket L+ 1750 mm - 1.4 m³, BoH 80x80
€6,744.00
Aufnahmen
Zubehör
Scope of delivery
- 1 × silage cutting bucket, working width 1.750 mm
- Cutting edge 150 × 18 mm, hardness 500 HB
- 2 hydraulic cylinders
- Bolt-on hook system 80 × 80
Not included: film and net clamp, hydraulic hoses and couplings.
Note: According to the manufacturer, the hydraulic pusher is intended for the tine versions in this range. Please confirm availability for the bucket version before ordering.
Technical data
| Manufacturer | Ålö AB, Sweden (Quicke brand) |
|---|---|
| Design | Silage cutter in bucket design |
| Size model | 175 |
| Working width | 1.750 mm |
| Overall width | 1.850 mm |
| Working depth | 830 mm |
| Overall length | 1.320 mm |
| Overall height, closed | 1.290 mm |
| Overall height with implement open | 1.810 mm |
| Maximum opening | 1.260 mm |
| Volume | 1,4 m³ |
| Maximum block footprint | 1.750 × 830 mm |
| Cutting edge | 150 × 18 mm |
| Cutting edge hardness | 500 HB |
| Hydraulic cylinders | 2 |
| Maximum hydraulic pressure | 230 bar |
| Mounting | Bolt-on hook system 80 × 80 |
| Weight | 979 kg |
| Carrier machines | large front loaders, telehandlers, wheel loaders |
Product description
This implement does two jobs with one tool: it cuts blocks from the silage clamp and splits silage bales – and, because it is a bucket, it also picks up loose feed and feed components. Three jobs, one attachment, with no need to change implements between feeding tasks.
That is where the economic benefit lies: every implement change during daily feeding costs five to ten minutes – getting out, uncoupling, coupling up and reconnecting hoses. Twice a day, 365 days a year, that adds up to around 60 to 120 working hours.
Block cutting – and why it protects the silage
The implement moves into the silage clamp and cuts out a block with a footprint of up to 1.750 × 830 mm, rather than tearing the material out. The difference is not in the feed removed, but in what is left behind in the clamp.
A torn face is loose and rough. Air penetrates this layer – and air means secondary fermentation, heating, yeasts and mould. When a face remains open for several days until the next layer is removed, this adds up to measurable losses in dry matter and energy content.
A smooth, vertical face is therefore about feed quality, not appearance. The block removed also remains compacted – it heats up more slowly on the way to the feed table than loose material.
The cutting edge: 18 millimetres at 500 HB
The cutting edge is 150 mm wide, 18 mm thick and hardened to 500 Brinell. These three specifications together determine its practical value.
500 HB is in the range of high-strength wear-resistant steels – well above ordinary structural steel, which is around 120 to 200 HB. The reason is simple: a blunt edge no longer cuts; it crushes and tears. This removes precisely the benefit for which the implement was bought – and it happens gradually, so nobody notices until the face starts to go mouldy.
The 18 mm thickness ensures that the edge can also withstand the mechanical forces involved in cutting: when moving into frozen or heavily compacted silage, considerable forces are exerted, and a thin edge will bend before it wears.
Practical tip: Check the edge at the end of every silage season. A worn cutting edge is a wear part, not damage to the implement – but it must be replaced before the next season starts, not afterwards.
Splitting bales with the same machine
Powerful cylinders and an opening width of 1.260 mm allow standard silage bales to be split. This is why the implement makes economic sense on farms that feed both clamp silage and bales from fields that are unsuitable for a forage harvester.
A split bale can be fed out in measured portions – half a portion today, the other half tomorrow – instead of opening a whole bale and leaving the remainder exposed to the air. For dry-cow herds and small groups, this is the difference between a planned ration and leftover feed.
Check your bale diameters: the 1.260 mm opening accommodates standard sizes, but not every oversized bale.
The bucket version – how it differs from the tine versions
This version is a closed bucket, not a tine implement. The practical difference:
- Loose material stays inside. Wilted grass, maize silage, pressed beet pulp, dry feed, mineral feed – anything that would fall through tines can be picked up and moved with the bucket.
- No losses on the way. Nothing falls out between the clamp and the feed table that then needs to be swept up.
- Greater weight. The closed design is heavier than a tine implement of the same working width – reducing the loader's payload.
A fair comparison: If you only remove blocks from the clamp and never handle loose material, a tine version is lighter and can also be fitted with the hydraulic pusher according to the manufacturer. You buy the bucket for its versatility, not just for block cutting.
The film and net clamp
A film and net clamp can be fitted as an accessory. It is mounted on its own frame and holds the film and net securely in a raised position with strong claws while the bale is being split.
It does two things:
- It saves you getting out of the cab. The film and net are held and pulled off without anyone leaving the cab to cut and remove them. With ten bales a day, this is the biggest time saving offered by the whole implement.
- Film does not get into the feed. The raised holding position prevents cut ends of film from falling into the feed mixer. This is the more important point: plastic fragments in the ration are eaten and can cause digestive disorders and foreign-body problems. Every piece of film that does not fall into the mixer is one that does not later have to be removed from an animal.
The clamp is not included and must be ordered separately.
Hydraulics: 230 bar maximum
The maximum permitted hydraulic pressure is 230 bar, and the implement operates with two cylinders on a double-acting spool valve circuit.
Check your machine's system pressure. Large wheel loaders and telehandlers sometimes operate at higher pressures; in this case, a pressure limiter is required in the circuit. A cylinder damaged by overloading is not covered by the warranty.
The load on your loader
979 kg unladen weight plus a 1,4 m³ load. At 650 to 750 kg/m³, grass silage weighs 910 to 1.050 kg – giving a total of around 1.900 to 2.030 kg at the attachment point, with an overall length of 1.320 mm and therefore considerable leverage.
What matters is your machine's lifting capacity at the height at which you fill the feed mixer – not at ground level. Capacity is lowest there, and that is where the work is done.
The Bolt-on hook system 80 × 80
The mounting is a bolted-on hook system measuring 80 × 80. It is designed for large front loaders, telehandlers and wheel loaders – not Euro standard.
Check the mounting on your machine before ordering. The same range is available with other mounting systems; each is a separate item with its own number. The advantage of the bolted-on system is that the hooks are replaceable if they become worn after years of use, so the implement does not have to be written off.
Frequently asked questions
What machine do I need for this implement?
A large front loader, telehandler or wheel loader with the Bolt-on hook system 80 × 80. Allow for around 1.900 to 2.030 kg at the attachment point – 979 kg unladen weight plus 910 to 1.050 kg of silage. What matters is the lifting capacity at working height, not at ground level.
Will the implement fit a Euro standard mounting?
No. This version has the Bolt-on hook system 80 × 80. The same range is available with other mountings, each as a separate item.
Can I also split bales with it?
Yes, this is one of its main functions. The maximum opening of 1.260 mm accommodates standard bale sizes. Check your bale diameters for oversized bales.
What is the difference compared with the tine versions?
The bucket version is closed and also picks up loose feed – wilted grass, maize silage, pressed beet pulp and dry feed. Tine versions are lighter and can be fitted with a hydraulic pusher according to the manufacturer. You buy the bucket for its versatility.
Is a hydraulic pusher available?
The manufacturer specifically lists the pusher for the tine versions in this range. Availability for the bucket version must be confirmed before ordering.
What is the film and net clamp for?
It holds the film and net in a raised position while the bale is being split. This saves you getting out of the cab and, above all, prevents cut ends of film from falling into the feed mixer – plastic in the ration can cause digestive disorders. The clamp is an accessory.
Why is a hard cutting edge important?
Because a blunt edge no longer cuts; it crushes and tears, losing the smooth face that prevents air ingress and secondary fermentation in the clamp. 500 HB is in the range of high-strength wear-resistant steels, well above ordinary structural steel at 120 to 200 HB.
What hydraulic pressure is permitted for my machine?
Maximum 230 bar. If large loaders operate at a higher system pressure, a pressure limiter is required in the circuit. The implement requires a double-acting spool valve circuit for the two cylinders.
Why is a smooth silage face so important?
A torn face is loose, allowing air to penetrate the layer. Air in the clamp means secondary fermentation, heating, yeasts and mould – with losses in dry matter and energy content. These losses add up when a face remains open for several days.
| Gerätetyp : | Silageschneider |
|---|---|
| Recording: | BoH |
| Working width: | 1.75m |