Skip to main content Skip to search Skip to main navigation
Menu

ALÖ Quicke Grab bucket S+ 1360 mm, 0.53 m³, 6 grab tines, BoH M16

Skip product gallery

Zubehör

AUFPREIS Quicke Seitenplatten geschraubt Multibenne S+
Prod. no.: QUI-11256791Q
Hersteller:

Regular price: €63.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz Volvo BM 1/2", 2 x 2250 mm, G1/2" - G3/4"
Prod. no.: QUI-60002021
Hersteller:

Regular price: €144.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz Quicke 1/2", 2 x 750 mm, G1/2" - G1/2"
Prod. no.: QUI-60016632
Hersteller:

Regular price: €114.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz MX 1/2", 2 x 750 mm, G1/2" - M22x1,5
Prod. no.: QUI-60016633
Hersteller:

Regular price: €114.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz Quicke 1/2", 2 x 1250 mm, G1/2" 90C - G1/2" ISO A
Prod. no.: QUI-60016634
Hersteller:

Regular price: €114.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz MX 1/2", 2 x 1250 mm, G1/2" - M22x1,5
Prod. no.: QUI-60016635
Hersteller:

Regular price: €114.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz 360
Prod. no.: QUI-11256964Q
Hersteller:

Regular price: €306.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke DBV Ventil 200 bar für Geräte mit Greifer
Prod. no.: QUI-60002029
Hersteller:

Regular price: €280.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Skip product gallery

Aufnahmen

Montagerahmen, Metallhaltewinkel, verstellbares Glied, Metallbügel, mechanische Baugruppe
ALÖ Quicke Mounting bracket BoH M16 L Euro/3PL
Prod. no.: ALO-11256944Q
Hersteller:

Regular price: €425.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Trägerrahmen, Montagehalter, Metallteil, Schwerlastträger, Schwarz
ALÖ Quicke Mounting bracket BoH M16 L tractor triangle
Prod. no.: ALO-11256217Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Halterung, Wandmontage, Lagerung, Metallhalter, Klemmvorrichtung
ALÖ Quicke Mounting bracket BoH M16 L Alo HD
Prod. no.: ALO-11255989Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Bänderöse, Löcher, Wandhalterung, Metallwinkel, Garderobenhalterung
ALÖ Quicke Mounting bracket BoH M16 L Alo Type 3
Prod. no.: ALO-11255624Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
rack mount bracket, wandhalter, stahlbügelausleger, orange roller, verstellbare stützen
ALÖ Quicke Mounting bracket BoH M16 L Atlas 35 - 15°
Prod. no.: ALO-11256502Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Halterung, Montage, Rahmen, Metall, Orangener Clip
ALÖ Quicke Mounting bracket BoH M16 L Atlas 65 - 29°
Prod. no.: ALO-11256505Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
stahlrahmen, grillhalter, motorradhalter, rohrstab, montagekit
ALÖ Quicke Mounting bracket BoH M16 L Bobcat/FDI/MF 10°
Prod. no.: ALO-11256764Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
kupferfarbener Haken, Hakenhalterung, Metallhalterung, Lagerhalterung, schwarzgrau
ALÖ Quicke Mounting bracket BoH M16 L CATERPILLAR TELEHANDLER
Prod. no.: ALO-11255577Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
wandhalter, Halterung, Metallhalter, orange Akzent, Gehäusehalter
ALÖ Quicke Mounting bracket BoH M16 L CNH LM
Prod. no.: ALO-11255607Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Lagerung, Klemmbock, Träger, Halterung, Rädchenhalterung
ALÖ Quicke Mounting bracket BoH M16 L Dieci Small
Prod. no.: ALO-11255629Q
Hersteller:

Regular price: €340.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
bracket, montageplatte, Winkelblech, Panel mit Bolzen, Befestigungsmaterial
ALÖ Quicke Mounting bracket DIY BoH M16 L set
Prod. no.: ALO-11256821Q
Hersteller:

Regular price: €290.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Scope of delivery

  • 1 × grab bucket, working width 1.360 mm
  • Grab with 6 hardened, replaceable tines, spacing 200 mm
  • Cutting edge 100 × 14 mm, hardness 500 HB
  • 2 hydraulic cylinders
  • Prepared for M16 S and M16 L hook systems

Not included – please order separately:

  • Hook set to suit your machine – the attachment cannot be fitted without it
  • Hose set to suit your loader
  • Side plates, if you want to handle loose bulk material
  • Pressure relief valve, 200 bar, if your hydraulics deliver more than 200 bar

Technical data

ManufacturerÅlö AB, Sweden (Quicke brand)
DesignGrab bucket with hydraulic tine grab
Size model140
Working width1.360 mm
Overall width1.400 mm
Working depth640 mm
Overall length670 mm
Overall height, closed840 mm
Overall height with grab open1.285 mm
Maximum opening1.210 mm
Volume0,53 m³
Grab tines6, spacing 200 mm, hardened and replaceable
Cutting edge100 × 14 mm
Cutting edge hardness500 HB
Side wallsOpen, side plates can be bolted on as an option
Hydraulic cylinders2
Max. hydraulic pressure210 bar
MountingBolt-on hook system M16 S or M16 L
Weight196 kg

Product description

A grab bucket combines two tools in one frame: the bucket below and the tine grab above. Together, they grip material that a bucket alone would only push – manure with straw, silage from the clamp, bulky waste, green waste and construction rubble containing long pieces.

This attachment is deliberately designed to be compact and lightweight: 1.36 m working width, a weight of just 196 kg and a depth of only 67 cm. It is made for smaller tractors and yard loaders – so these machines can still lift the bucket when it is full.

Why the short design does more than a large capacity

At 0.53 m³, the capacity looks modest on paper. But it is worth taking a closer look at the reasoning behind it.

The load centre of a bucket is roughly halfway along its depth. At 67 cm deep, the load sits around 34 cm in front of the mounting point – compared with 65 cm for a 1.30 m-deep bucket. A loader's lifting capacity decreases significantly as the distance to the load centre increases.

In practice, this means a small loader can lift this bucket when full. A large-capacity bucket on the same machine can only be half-filled; it then holds the same amount but weighs 80 kg more and extends 60 cm further forwards. The short bucket floor is not a compromise; it is what makes the attachment work on small machines.

For comparison: 0.53 m³ of manure or silage weighs around 350 to 400 kg; with the bucket's own weight of 196 kg, that makes around 550 to 600 kg at the mounting point. Any yard loader or small front loader can handle this.

Open sides – by design, not to cut costs

The side walls are open by design, allowing the attachment to penetrate dense, matted material. Anyone who has tried to drive a closed bucket into a compacted layer of manure knows the difference: a closed bucket pushes the heap ahead of it, while an open one cuts into it.

The trade-off is that loose bulk material spills out at the sides. Sand, grain, wood chips, sawdust – anything that flows will escape through the open sides.

Bolt-on side plates are available. They turn the grab bucket into a closed bucket when needed and can be removed again for manure and silage. If you really want to use the attachment as a multi-purpose bucket, order them with it – they are the most affordable accessory and the one that makes the biggest difference to the range of applications.

The cutting edge: 14 millimetres at 500 HB

The cutting edge is 100 mm wide, 14 mm thick and hardened to 500 Brinell. 500 HB is in the range of high-strength wear-resistant steels, well above ordinary structural steel at around 120 to 200 HB.

The reason is the surface it works on: a bucket edge wears faster on concrete than on any other ground surface. Cattle shed passageways, feed tables, silage clamps and farmyards – this attachment works in exactly these places. A soft edge would be rounded off after one season, and a rounded edge pushes instead of cutting: manure is left on the passageway and the operator has to make several passes.

Six hardened grab tines

The grab uses six tines spaced 200 mm apart. They are hardened and individually replaceable – the right design for a part that works in manure and on concrete every day: a bent or broken tine is a spare part costing just a few euros, not damage to the attachment.

With a maximum opening of 1.210 mm, the grab can handle bulky material too. The 20 cm tine spacing is designed for strawy manure and silage – close enough to hold the material, but wide enough for it to come free when the grab opens rather than getting caught.

Controlled unloading

As the grab moves independently of the bucket, the load can be released in portions rather than all at once. This is a key advantage in confined spaces: filling a feed mixer, spreading bedding into individual pens or unloading into a container beneath a roof.

A fixed bucket can only tip – all or nothing. Here, you can open the grab as far as needed to release the material.

The bolt-on hook system – the real advantage

The mounting consists of bolted-on hooks selected to suit the machine. This may sound like extra work, but in reality it is the attachment's biggest advantage:

  • The same bucket fits many makes. Hook sets are available for, among others, Euronorm, Euronorm -13°, Alö Typ 3, Kramer, Weidemann and Zettelmeyer. You are buying the attachment, not committing to one machine.
  • Changing machines only costs you the hook set. If you have a different loader on the farm in five years' time, you replace the hook set – not the bucket. An attachment with a welded-on mounting would be worthless.
  • Worn hooks can be replaced. The hooks are the parts subject to the most movement and wear. Because they are bolted on, they can be replaced as spare parts.

Important: the hook set is not included. It must be ordered to suit your machine – size S or L, depending on the carrier machine. Please state the make and model of your loader when ordering.

Hydraulics

Two cylinders operate the grab; a double-acting spool valve is required. The maximum permitted pressure is 210 bar.

A pressure relief valve is required if your hydraulics deliver more than 200 bar. It is available as an accessory. Check your machine's system pressure before ordering – a cylinder that has been overloaded is not covered by the warranty. Hose sets are available for each loader type.

Frequently asked questions

Is the hook set included?

No. The attachment is prepared for M16 S and M16 L hook systems; the hook set to suit your machine must be ordered separately. The bucket cannot be fitted without it. Please state the make and model of your loader when ordering.

Which loaders does the bucket fit?

Many – that is precisely the advantage of the bolted-on hook system. Hook sets are available for, among others, Euronorm, Euronorm -13°, Alö Typ 3, Kramer, Weidemann and Zettelmeyer. If you change machines later, you only need to replace the hook set.

Why is the capacity only 0.53 m³?

Because the compact design, with a depth of 67 cm, keeps the load centre close to the mounting point. This allows a small loader to lift the bucket when full, whereas it could only half-fill a large-capacity bucket – which would also weigh more and have a longer lever arm.

What lifting capacity does my loader need?

Around 550 to 600 kg: 196 kg of bucket weight plus around 350 to 400 kg of manure or silage at 0.53 m³. More for heavy bulk material – in that case, the fill height, not the volume, is the deciding factor.

Can I use it to load sand or grain?

Only with the bolt-on side plates. The side walls are open as standard so the attachment can penetrate dense material – loose bulk material will therefore spill out at the sides. The side plates are available as an accessory and can be removed.

Do I need a pressure relief valve?

Yes, if your hydraulics deliver more than 200 bar. The maximum permitted pressure is 210 bar. The valve is available as an accessory. Check your machine's system pressure before ordering.

Why does the cutting edge have a hardness of 500 HB?

Because this attachment works on concrete – in cattle shed passageways, on feed tables, silage clamps and farmyards. An edge wears faster there than on any other ground surface. 500 HB is in the range of high-strength wear-resistant steels; a soft edge would be rounded off after one season and would push instead of cut.

Can the grab tines be replaced individually?

Yes. The six tines are hardened and individually replaceable. A bent or broken tine can therefore be replaced as a spare part, rather than being damage to the attachment.

Can I unload the material in controlled portions?

Yes. The grab moves independently of the bucket, so the load can be released in portions rather than all at once. This is useful when filling feed mixers, spreading bedding and unloading in confined spaces.

Properties
Gerätetyp : Greifschaufel und Greifer
Recording: BoH
Working width: 1.40m