Alö Precision bucket 200 PC SMS
€1,466.25
Scope of delivery
- 1 × Alö Quicke precision bucket 200 PC SMS, conical design
- Bolted wear edge 500 HB, 150 × 16 mm
- Welded SMS mounting (Quicke quick-attach system)
Note: The bucket fits only front loaders with a Quicke SMS mounting. For front loaders with a Euro-standard mounting, the Euro version is available (model 200 PC Euro, article number 11253148Q).
Technical data
| Manufacturer | Alö / Quicke (JOST Umeå AB) |
|---|---|
| Model | Precision bucket 200 PC SMS (conical) |
| Article number (manufacturer) | 11253145Q |
| Equipment type | Precision bucket / Precision Bucket (Conical) |
| Design | conical – tapers towards the front |
| Mounting | SMS (Quicke quick-attach system), welded |
| Overall width (rear) | 1.140 mm |
|---|---|
| Working width (front opening) | 545 mm |
| Overall depth | 2.080 mm |
| Working depth | 1.985 mm |
| Height | 710 mm |
| Weight | 270 kg |
| Capacity (struck) | 710 litres |
|---|---|
| Capacity (heaped) | 870 litres |
| Hardness | 500 HB (Brinell) |
|---|---|
| Dimensions (W × D) | 150 × 16 mm |
| Attachment | bolted (replaceable) |
Product description
Who this bucket is designed for
The Quicke precision bucket 200 PC is a specialist bucket for controlled, metered discharge of material. It is long and narrow, and tapers towards the front – a design that slows the flow of material and allows the operator to control precisely where and how much material is deposited.
The “200” in the designation does not refer to the width, but to the depth: 2.080 mm. The front opening is only 545 mm wide – narrower than a feed barrier at a feed passage.
Typical applications:
- Distributing feed along the feed passage – accurately and evenly spreading TMR, silage or concentrate
- Metering grain, seed or bulk materials into narrow containers, hoppers or troughs
- Depositing material in narrow channels, ditches or along edges
- Spreading compost, wood chips or fertiliser in strips
Why conical? – The design explained
Quicke offers the precision bucket in two versions:
| Feature | PC – conical (this version) | PS – straight |
|---|---|---|
| Side walls | Taper towards the front | Parallel (same width at the front and rear) |
| Width (rear / opening) | 1.140 / 545 mm | 1.160 / 1.145 mm |
| Capacity (struck / heaped) | 710 / 870 l | 870 / 930 l |
| Weight | 270 kg | 266 kg |
| Discharge precision | Higher – narrow outlet concentrates the material | Good – but spreads material more widely |
| Filling | Slightly more difficult (narrow opening) | Easier – wide opening |
| Article number | 11253145Q | 11253135Q |
Rule of thumb: The conical PC is the right choice when placement needs to be accurate to the centimetre – for example, when distributing feed along narrow feed passages or filling narrow containers. The straight PS is better when the material needs to be spread more widely and the bucket is filled with the front loader more frequently.
The conical bucket back – complete emptying
Both versions (PC and PS) have a conically shaped bucket back. This is a separate design feature: the back tapers downwards, allowing material to slide out of the bucket completely and cleanly when tipping. With conventional buckets with a flat back, material often sticks in the corners – particularly damp feed or sticky soil.
Long floor plate – friction as a control mechanism
The bucket is 2.080 mm deep – more than twice as deep as a conventional general-purpose bucket of the same capacity. The long floor plate creates friction between the material and the bucket floor, slowing the material as the bucket tips. The operator slowly tips the bucket forwards, and the material flows in a controlled, even manner through the narrow opening – instead of falling out in a rush.
500 HB edge – as on the grading bucket
The bolted edge has a Brinell hardness of 500 HB – identical to the Quicke grading bucket. At 150 × 16 mm, the edge is slightly narrower than on the grading bucket (150 × 18 mm), because the precision bucket is not intended for grading hard surfaces. It is bolted and can be replaced without welding.
What the precision bucket does not have – and why
No wide opening: The conical PC has an opening width of just 545 mm. This is intentional – if you need a wide opening, choose the straight PS version (1.145 mm) or a general-purpose bucket.
No grab: A grab would disrupt the controlled flow of material and obstruct the view of the edge.
No large capacity: 870 litres with a bucket weight of 270 kg – this bucket is designed for precision, not maximum loading capacity.
No side cutters: The side walls are smooth – the bucket is designed to deposit material, not to cut into it from the sides or penetrate it.
Front loader vs wheel loader – two depths
Quicke offers the precision bucket in two depths:
| Version | Depth | Mounting | Weight | Capacity (heaped) |
|---|---|---|---|---|
| 200 PC SMS – this version | 2.080 mm | SMS (Quicke) | 270 kg | 870 l |
| 250 PC Volvo BM Large | 2.680 mm | Big BM | 562 kg | 1.540 l |
The 200 front loader version is designed for the limited lifting capacity of tractor front loaders. The 250 wheel loader version is deeper (2.5 m), heavier (562 kg) and holds almost twice as much – but it requires a wheel loader with a Big BM mounting.
Alö / Quicke – background
Alö is the Swedish manufacturer of the Quicke brand – one of the world's largest suppliers of front loaders and front loader attachments for tractors over 50 hp (market share approx. 30%). The company was renamed JOST Umeå AB in 2024 and is part of JOST Werke SE (Neu-Isenburg, Germany). Production continues at the Brännland plant near Umeå, Sweden.
Frequently asked questions
What does “PC” mean on the Quicke precision bucket?
PC stands for the conical version (Precision Conical) of the precision bucket. The side walls taper from 1.140 mm at the rear to 545 mm at the discharge opening. The alternative is the PS version (Precision Straight), with parallel side walls and an opening width of 1.145 mm.
What is a precision bucket used for?
For controlled, metered placement of material: distributing feed along a feed passage, metering grain into containers and filling narrow spaces with bulk material. The long floor plate slows the flow of material, while the narrow opening concentrates it – the operator controls how much material comes out by adjusting the tipping angle.
Can I also use the precision bucket for loading?
To a limited extent. The bucket can pick up and transport material, but the narrow opening (545 mm) makes it harder to fill than a general-purpose bucket. A general-purpose or high-capacity bucket is better suited to regular loading work.
Will the bucket fit my front loader?
Only front loaders with a Quicke SMS mounting. For front loaders with a Euro mounting, the Euro version is available (article number 11253148Q). The two versions are technically identical – only the mounting differs.
Why is the bucket so deep and narrow?
The depth of 2.080 mm creates friction on the floor plate, slowing the material as the bucket tips. The narrow opening (545 mm on the conical PC) concentrates the flow of material. Together, these features allow slow, even emptying – unlike a wide, shallow bucket, from which material falls out uncontrollably.
| Gerätetyp : | Präzisionsschaufel |
|---|---|
| Recording: | SMS |
| Working width: | 2.00m |