Skip to main content Skip to search Skip to main navigation
Menu

Alö Multibenne S+ 120 BOH M16S

Skip product gallery

Optionen

AUFPREIS Quicke Seitenplatten geschraubt Multibenne S+
Prod. no.: QUI-11256791Q
Hersteller:

Regular price: €63.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz Volvo BM 1/2", 2 x 2250 mm, G1/2" - G3/4"
Prod. no.: QUI-60002021
Hersteller:

Regular price: €144.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz Quicke 1/2", 2 x 750 mm, G1/2" - G1/2"
Prod. no.: QUI-60016632
Hersteller:

Regular price: €114.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz MX 1/2", 2 x 750 mm, G1/2" - M22x1,5
Prod. no.: QUI-60016633
Hersteller:

Regular price: €114.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz Quicke 1/2", 2 x 1250 mm, G1/2" 90C - G1/2" ISO A
Prod. no.: QUI-60016634
Hersteller:

Regular price: €114.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz MX 1/2", 2 x 1250 mm, G1/2" - M22x1,5
Prod. no.: QUI-60016635
Hersteller:

Regular price: €114.75
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke Schlauchsatz 360
Prod. no.: QUI-11256964Q
Hersteller:

Regular price: €306.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
AUFPREIS Quicke DBV Ventil 200 bar für Geräte mit Greifer
Prod. no.: QUI-60002029
Hersteller:

Regular price: €280.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Scope of delivery

  • 1 × Alö Quicke Multibenne S+ 120, grab bucket body with 6 grab tines
  • Bolted wear edge 500 HB, 100 × 14 mm
  • BoH M16S hooks (Bolt-On-Hook, M16 Small) – loader-specific
  • 2 hydraulic cylinders

Note – check the mounting system: The BoH M16S hooks are loader-specific. Before ordering, you must specify which compact loader the hooks need to fit (e.g. Giant, Kramer Compact, Schäffer, Thaler, Weidemann). Not all loader models are compatible.

Technical data

ManufacturerAlö / Quicke (JOST Umeå AB)
ModelMultibenne S+ 120 BoH M16S
Part number (base unit)11255717Q *
Equipment typeGrab bucket / Bucket Grab
SeriesMultibenne S+ (for compact and yard loaders)
Mounting systemBoH M16S (Bolt-On-Hook, M16 Small)

* The BoH M16S version may have its own part number. Please confirm with the supplier.

Dimensions and weight
Overall width1,200 mm
Working width1,170 mm
Depth880 mm
Working depth830 mm
Height (closed)900 mm
Maximum height (open)approx. 1,290 mm
Maximum opening1,270 mm
Weight224 kg (base unit, possibly without hooks)
Capacity
Capacity520 litres (0.52 m³)
Grab head
Grab tines6, hardened, replaceable
Tine spacing200 mm
Hydraulic cylinders2
Max. hydraulic pressure210 bar
Wear edge
Hardness500 HB (Brinell)
Dimensions (W × D)100 × 14 mm
Attachmentbolted (replaceable)

Product description

Who this grab bucket is designed for

The Quicke Multibenne S+ 120 is a grab bucket for compact and yard loaders with a lifting capacity of up to approx. 2 tonnes. It combines a closed bucket body with a hydraulic grab head, making it a versatile tool for manure, silage, feed and loose bulk materials.

“S+” denotes the current series, featuring a shorter bucket floor designed for the lower breakout force of smaller machines. The shorter floor reduces resistance when penetrating compacted material, allowing even light loaders to fill the bucket completely.

Typical applications:

  • Clear solid manure from the barn and load it onto manure spreaders
  • Remove silage from the clamp – grab tines hold the material in place
  • Transport pelleted feed, concentrates or minerals (closed bucket body)
  • Handle wood chips, compost or bark mulch
  • Clean out livestock buildings – collect the last remnants along the wall (the grab design allows work right up against the wall)

BoH M16S – what the mounting system means

BoH stands for Bolt-On-Hook – a modular bolt-on system from Quicke. The hooks are bolted to the bucket body using M16 bolts. This means:

  • The hooks are loader-specific – a matching pair of hooks is available for each loader type
  • One bucket body can be adapted to different loaders by changing the hooks
  • No welding required – simply undo the bolts and fit a new pair of hooks

M16S = M16 Small – the smaller hook version for compact and yard loaders. The larger M16L (Large) version is for tractor front loaders from approx. 50 hp.

Available BoH M16S hooks (selection)
Loader brandCompatible models / mounting system
GiantGiant mounting system
KnikmopsModels 80–100, 120–140, 180–250
KramerKramer Compact
Quicke / AlöSMS mounting system (including −9° version for Flexitrac)
SchäfferType SWH, Square 336/442
ThalerStandard and Compact
WeidemannMV and HV

Before ordering: Specify the exact loader type and model so that the correct hooks can be supplied.

Cut-away side plates – improved penetration

The side plates of the Multibenne S+ are heavily cut away. This reduces resistance when the bucket penetrates compacted material, particularly compacted manure or silage. The downside is that loose materials (pellets, fine bulk materials) may spill out at the sides. Quicke offers optional bolt-on plates to close the side openings.

Grab head – open design for working against walls

The grab head, with 6 replaceable, hardened tines, is designed to let the bucket work right up against a wall, both with the grab fully open and closed. This is particularly important for cleaning livestock buildings: the last remnants along the pen wall or feed barrier can be collected without leaving a gap.

The maximum opening of 1,270 mm is greater than the bucket width of 1,200 mm – the tines extend beyond the bucket edge, making it easier to fill.

Closed bucket body – more than just a grab bucket

Unlike a dedicated silage grab, the Multibenne has a fully enclosed bucket body. This means:

  • Pelleted feed and fine materials stay in the bucket
  • Liquids can be transported to a limited extent
  • The bucket also works without the grab as a standard bucket for pushing and loading

The Multibenne S+ series for compact loaders – where the 120 fits

Multibenne S+ for compact/yard loaders (BoH M16S)
ModelWidthWeightCapacityGrab tines
90900 mm146 kg300 l4
1001,000 mm176 kg430 l5
120 – this version1,200 mm224 kg520 l6
1401,400 mm274 kg620 l7

All models have the same depth (880 mm), height (900 mm) and wear edge (100 × 14 mm, 500 HB). The larger series (160–220) is designed for tractor front loaders and has a wider wear edge (150 × 14 mm).

What the Multibenne S+ 120 does not have – and why

No Euro mounting system: The 120 model is designed for compact loaders with the BoH M16S system. Euro mounting systems are only available from the larger series (160–220).

No side plates as standard: The cut-away side plates are intentional (for improved penetration). If you transport loose materials, you will need the optional bolt-on plates.

No pressure relief valve as standard: The maximum hydraulic pressure is 210 bar. If the loader delivers more than 210 bar, an optional pressure relief valve must be fitted in the circuit to protect the cylinders.

Alö / Quicke – background

Alö is the Swedish manufacturer of the Quicke brand – one of the world’s largest suppliers of front loaders and front-loader attachments for tractors over 50 hp (approx. 30% market share). The company was renamed JOST Umeå AB in 2024 and is part of JOST Werke SE (Neu-Isenburg, Germany). Production takes place at the Brännland plant near Umeå, Sweden.

Frequently asked questions

What does BoH M16S mean?

BoH = Bolt-On-Hook – a modular bolt-on system from Quicke. The hooks are bolted to the bucket body using M16 bolts and are loader-specific (for Giant, Kramer, Schäffer, Weidemann and others). S = Small – the version for compact and yard loaders with a lifting capacity of up to approx. 2 t.

Which loaders is the Multibenne S+ 120 compatible with?

Compact and yard loaders for which a BoH M16S hook pair is available: Giant, Knikmops, Kramer Compact, Schäffer, Thaler, Weidemann and Quicke loaders with an SMS mounting system. The exact loader type must be specified before ordering.

Can I fit the Multibenne S+ 120 to a tractor front loader?

The 120 size is designed for compact loaders. The larger 160–220 series is available for tractor front loaders, with a Euro mounting system or BoH M16L (Large). Suitable M16L hooks could theoretically be fitted, but the 120 model’s capacity and width are generally too small for tractors.

What are the optional side plates?

Bolt-on plates that close the cut-away side openings. They prevent loose materials (pellets, grain, fine bulk materials) from spilling out at the sides. They can be fitted with one tool in just a few minutes.

Do I need a pressure relief valve?

Only if your loader delivers more than 210 bar hydraulic pressure. The optional pressure relief valve is fitted between the loader and grab bucket and limits the pressure to a safe level. Check your loader’s hydraulic pressure in the operator’s manual.

Properties
Gerätetyp : Greifschaufel und Greifer
Recording: BoH
Working width: 1.20m