Alö Levelling bucket 200 SMS
€1,309.00
Scope of delivery
- 1 × Alö Quicke grading bucket 200 SMS, working width 2,040 mm
- Bolted-on wear edge 500 HB
- Welded-on SMS mounting (Quicke quick-attach system)
Note: The bucket fits only front loaders with a Quicke SMS mounting – it is not compatible with Euro-standard brackets. Before ordering, check whether your front loader uses the SMS system.
Technical data
| Manufacturer | Alö / Quicke (JOST Umeå AB) |
|---|---|
| Model | Grading Bucket 200 SMS |
| Manufacturer's part number | 11252415Q |
| Equipment type | Grading bucket / Grading Bucket |
| Mounting | SMS (Quicke quick-attach system), welded on |
| Overall width | 2,050 mm |
|---|---|
| Working width | 2,040 mm |
| Overall depth | 1,180 mm |
| Working depth | 1,090 mm |
| Height | 720 mm |
| Weight | 312 kg |
| Capacity (struck) | 490 litres |
|---|---|
| Capacity (heaped) | 700 litres |
| Hardness | 500 HB (Brinell) |
|---|---|
| Dimensions (W × D) | 150 × 18 mm * |
| Attachment | bolted on (replaceable) |
* The manufacturer's product description specifies a 20 mm edge thickness, while the specification table states 18 mm. Please check with the supplier.
| Mounting plates | 20 mm, welded on |
|---|---|
| Reinforcing bars | 10 mm angle iron, welded beneath the mounting plates |
| Back plate | flat / low (Low Back Plate) |
| Bottom plate | long and reinforced (Long Bottom Plate) |
Product description
Who this bucket is designed for
The Quicke Grading Bucket 200 SMS is a specialist tool for grading and levelling work with a front loader. It is not designed for loading heavy bulk materials – it has neither a grab nor the capacity for that – but for accurately spreading, scraping and levelling material over surfaces.
Typical applications:
- Levelling farmyards – spreading crushed stone, gravel and sand evenly
- Grading farm tracks and access roads – removing ruts and uneven patches
- Levelling silage clamp floors – spreading material over the surface
- Levelling paddocks and riding arenas – grading sand or woodchip evenly
- Preparing construction sites – thoroughly levelling the ground
Low-profile design with clear visibility – why it matters
The grading bucket has a low back plate and a long, reinforced bottom plate. The operator can see over the low back plate and view the top edge of the cutting edge – the most important reference line when grading.
Many general-purpose buckets have high back plates (for capacity) and short bottoms (for strength). This is ideal for loading, but when grading, visibility of the cutting edge is restricted and the short bottom tends to tip. The grading bucket reverses this balance: less height, more depth – giving more contact area with the ground and more stable control when scraping.
500 HB cutting edge – the hardest in the Quicke range
The bolted-on cutting edge has a Brinell hardness of 500 HB – harder than the cutting edges on many earthmoving and general-purpose buckets, which typically have a hardness of 400–450 HB. There is a reason for this: when grading, the cutting edge slides over crushed stone, gravel and compacted surfaces. The load is spread over a wide area and continuous, rather than concentrated at a point as when digging into a manure heap.
The cutting edge is bolted on – when it is worn, undo the bolts and fit a new edge. No welding or workshop visit required.
10 mm angle iron – reinforcement in the right place
A 10 mm-thick piece of angle iron is welded beneath the 20 mm mounting plates on the back of the bucket. It stiffens the connection between the bucket body and the mounting exactly where the greatest bending forces occur during grading – when the cutting edge meets resistance and the full force is transferred through the mounting plates to the front loader.
SMS mounting – what it means
SMS is Quicke/Alö's proprietary quick-attach system. It is not compatible with the Euro-standard mounting (ISO 23206). Quicke front loaders use either SMS or Euro; most older Quicke loaders have SMS, while newer models offer both options.
Check before ordering: Which mounting does your front loader have? The Quicke grading bucket is also available in a Euro version (separate model). If you use a front loader from another manufacturer (Stoll, MX, John Deere), you need the Euro version.
The grading bucket range – where the 200 SMS fits
| Model | Overall width | Weight | Capacity (heaped) | Cutting edge (W × D) |
|---|---|---|---|---|
| 180 SMS | 1,850 mm | 286 kg | 620 l | 150 × 18 mm |
| 200 SMS – this version | 2,050 mm | 312 kg | 700 l | 150 × 18 mm |
| 220 SMS | 2,250 mm | 337 kg | 780 l | 150 × 18 mm |
| 240 SMS | 2,470 mm | 407 kg | 860 l | 200 × 18 mm |
The 200 SMS is the second size in the range – wide enough for most farmyards and tracks, yet still light enough for front loaders with a lifting capacity of around 1,500 kg or more. The 240 has a wider cutting edge (200 rather than 150 mm), increasing its service life during heavy grading work, but adding 95 kg to its weight.
All models have the same depth (1,180 mm) and height (720 mm) – the design stays the same; only the width changes.
What the grading bucket does not have – and why
No grab: A grab would obstruct visibility over the back plate and compromise the low-profile design. If you need to load by grabbing, you need a grab bucket.
No teeth: Teeth would gouge furrows into the ground when grading – the exact opposite of the desired result.
No large capacity: A heaped capacity of 700 litres is small for a 2-metre bucket. This is intentional: the grading bucket is designed to spread material in a thin layer, not transport large quantities.
No hydraulic function: The bucket is operated entirely mechanically via the front loader – no additional hydraulic connections are needed.
Alö / Quicke – background
Alö is the Swedish manufacturer of the Quicke brand – one of the world's largest suppliers of front loaders and front-loader attachments for tractors over 50 hp (market share approx. 30%). The company was renamed JOST Umeå AB in 2024 and is part of JOST Werke SE (Neu-Isenburg, Germany). Production continues at the Brännland plant near Umeå, Sweden.
Frequently asked questions
Will the 200 SMS grading bucket fit my front loader?
Only front loaders with a Quicke SMS mounting. The SMS mounting is not compatible with the Euro-standard mounting (ISO 23206). If your front loader has a Euro mounting (Stoll, MX, John Deere and many others), you need the Euro version of the grading bucket.
What is a grading bucket better suited to than a standard bucket?
It is designed for grading and levelling work: scraping farmyards, spreading gravel, levelling tracks and grading riding arenas. Its low-profile design gives the operator a clear view of the cutting edge, the long bottom plate provides more stable ground contact, and the 500 HB cutting edge withstands continuous abrasion. For loading manure, silage or soil, a high-capacity or general-purpose bucket is a better choice.
Can I use the grading bucket to clear snow?
To a limited extent. The low-profile design and wide cutting edge are suitable for clearing thin layers of snow from paved surfaces. A snow blade or a snow bucket with a higher back plate is better suited to heavy, wet snow or larger quantities.
Do I need to replace the cutting edge regularly?
Yes – the cutting edge is a wear part. Its 500 HB hardness significantly extends its service life, but any cutting edge will wear down through continuous contact with crushed stone and gravel. Replacement is straightforward: undo the bolts, remove the old edge and bolt on the new one – no welding required.
How much does the 200 SMS grading bucket weigh?
312 kg. This makes it lighter than most general-purpose buckets of the same width, as the low back plate requires less material. However, you should check the lifting capacity of your front loader: it must be able to safely lift the 312 kg bucket plus its load.
| Gerätetyp : | Planier- und Räumschaufel |
|---|---|
| Recording: | SMS |
| Working width: | 2.00m |