Skip to main content Skip to search Skip to main navigation
Menu

Alö CL Bucket 170 Euro

Description

Scope of delivery

  • 1 × Alö CL bucket 170 with Euro mounting (welded on)

Technical data

ModelCL bucket 170 Euro
Article number11254830Q
Bucket rangeCompact Large (CL) – compact tractors
MountingEuro (welded on)
Dimensions
Overall width174 cm
Working width172 cm
Overall depth (including Euro mounting)73 cm
Working depth66,5 cm
Overall height (including Euro mounting)62 cm
Capacity and weight
Heaped capacity0,44 m³ (440 litres)
Struck capacity0,36 m³ (360 litres)
Weight121 kg
Cutting edge
Cutting edge width100 mm
Cutting edge thickness16 mm
Cutting edge hardness170 HB (Brinell)
Design
Side wallConcave gable shape – makes it easier to penetrate bulk material
Bolt-on Hooks preparationno (not a “+” model)
Accessory interfacenot available

Product description

Who this bucket is designed for

The Alö CL 170 is a general-purpose bucket for compact tractors with front loaders – machines in the approximately 25 to 75 hp class, as used on hobby farms, in municipal services, landscaping and smaller businesses. Typical carrier vehicles are compact tractors from Kubota, Iseki, John Deere, Branson, LS, Kioti or Solis with front loaders in the 300–800 kg lifting capacity class.

Lightweight design is the goal: At just 121 kg, the CL 170 leaves as much lifting capacity as possible for the actual payload. With a compact tractor front loader rated at 600 kg, after deducting the bucket’s weight, 479 kg remains for the material – enough for a heaped bucket of compost, wood chips or loose soil, but not wet sand or gravel.

What fits in the bucket?

Bulk density table – 0,44 m³ heaped
MaterialBulk density (approx.)Weight per heaped bucketFeasible with 600 kg lifting capacity?
Wood chips250 kg/m³approx. 110 kgyes
Loose compost400 kg/m³approx. 176 kgyes
Grain750 kg/m³approx. 330 kgyes
Loose soil1.200 kg/m³approx. 528 kgmarginal – struck only
Dry sand1.500 kg/m³approx. 660 kgno – partially filled only
Gravel1.800 kg/m³approx. 792 kgno – partially filled only

Rule of thumb: Light bulk materials up to approx. 1.000 kg/m³ can be loaded heaped with the CL 170. For heavy materials over 1.200 kg/m³, you must underfill the bucket so that the total weight does not exceed your front loader’s lifting capacity. The lifting capacity stated in your loader’s operating manual is authoritative.

Euro mounting – welded on

The bucket has a permanently welded-on Euro mounting (also known as a “Euro frame” or “SMS mounting”). Euro is the most widely used standard for compact and mid-range front loaders in Europe. If your front loader has a Euro mounting, the bucket fits directly – no adapter required.

No interchangeable frame: The Euro mounting is welded on, not bolted on. This saves weight and play, but means the bucket cannot be converted to other mounting systems (e.g. Skid Steer, BoH M16 or carrier-specific mountings).

Concave side walls – why this matters on compact tractors

The CL’s side walls have a concave gable shape. This shape makes it easier to penetrate bulk material because the cutting edge encounters less resistance when entering the pile. On heavy tractors with high breakout force, this is a minor detail; on a compact tractor with limited weight and hydraulic pressure, it can make the difference between the “bucket digging in” and the “rear axle lifting off the ground”.

What the CL 170 doesn’t have – and why

The CL range does not have a “+” in its name. In the Alö system, “+” means that Bolt-on Hooks mountings are provided, allowing accessories such as ripper teeth, grabs and wall protectors to be bolted on. The CL does not have these mountings – deliberately, because each mounting adds weight, and on a 121 kg bucket for a loader that may have a lifting capacity of just 600 kg, that is not an acceptable compromise.

If you need accessories, consider a GS+ or GM+ – but only if the front loader can handle the extra weight of 50–100 kg.

Cutting edge: 170 HB

The cutting edge is 100 mm wide and 16 mm thick and has a hardness of 170 HB (Brinell). This is a soft to medium-hard cutting edge – suitable for soil, compost, silage and light bulk materials. With highly abrasive materials (road stone, crushed rock), it wears faster than hardened cutting edges with 400+ HB, as commonly used on earthmoving buckets. Worn cutting edges can be replaced.

Where the CL 170 fits in the Alö bucket range

RangeLetter codeForCapacity (example)Weight (example)
CS / CMCompact Small / MediumSmallest compact tractors, yard loaders0,24–0,35 m³72–105 kg
CLCompact LargeLarger compact tractors0,34–0,44 m³99–121 kg
GS / GS+General Purpose SmallSmall to medium front loaders0,32–0,71 m³88–212 kg
GM / GM+General Purpose MediumMedium to large front loaders0,54–0,95 m³158–279 kg
SM / SM+Soil MediumMedium front loaders, heavy soils0,60–1,26 m³225–395 kg
VL / VL+Volume LargeWheel loaders, telehandlers1,80–3,60 m³430–860 kg

The CL bridges the gap between the yard loader class (CS/CM) and the standard front loader class (GS/GM). If you have a compact tractor with a front loader in the 600–1.000 kg class, this is the right choice. If you have a mid-range tractor from around 80 hp with a loader rated above 1.000 kg, choose the GS+ or GM+.

Frequently asked questions

Will the CL 170 fit my front loader?

If your front loader has a Euro mounting, the bucket fits directly. Euro is the most common standard on compact and mid-range front loaders in Europe. Check your loader’s identification plate or operating manual. This bucket will not fit a Skid Steer mounting or manufacturer-specific systems.

Does my loader have enough lifting capacity?

The bucket weighs 121 kg. Subtract this weight from your front loader’s lifting capacity – the remainder is available for the payload. For light bulk materials (compost, wood chips, grain), a front loader rated at around 400 kg or more is sufficient. For heavy materials (soil, sand), you need at least 700–800 kg lifting capacity, and even then you must underfill the bucket.

Can I retrofit accessories such as ripper teeth or a grab?

Not without welding. The CL does not have Bolt-on Hooks preparation (it is not a “+” model). If you need accessories, consider a GS+ or GM+ bucket – provided the front loader can handle the extra weight.

What does a cutting edge hardness of 170 HB mean?

170 HB (Brinell) is a soft to medium-hard cutting edge. It is suitable for soil, compost, silage and light bulk materials. With highly abrasive materials such as road stone, it wears faster than hardened cutting edges with 400+ HB. Worn cutting edges can be replaced.

What is the difference between CL, GS and GM?

All three are general-purpose buckets, but for different machine classes. The CL is the largest bucket in the compact range (up to 0,44 m³, 121 kg). The GS is for standard front loaders on mid-range tractors (up to 0,71 m³, 212 kg), while the GM is for larger front loaders (up to 0,95 m³, 279 kg). As you move up the range, capacity, weight and material thickness increase – as do the demands on the front loader’s lifting capacity.

Properties
Gerätetyp : Universalschaufel
Recording: Euro borrowing
Working width: 1,70m