Alö Bale fork M 140 Euro
€475.00
Scope of delivery
- 1 × Alö Bale Fork M 140 with Euro mounting (welded on)
- Tines are not included – order Conus 2 tine sets (820 mm or 1,240 mm) separately
Technical data
| Model | Bale Fork M 140 Euro |
|---|---|
| Series | Bale Fork M – Medium (front loader) |
| Mounting | Euro (welded on) |
| Overall width | 141 cm |
|---|---|
| Working width | 130 cm |
| Overall depth | 32 cm |
| Working depth | 32 cm |
| Height | 58 cm |
| Weight (without tines) | 62 kg |
| Tine type | Conus 2 (Q-Tines) – Ø 44 mm, M28 × 1.50 thread |
|---|---|
| Tine mounting | Fixed (screwed in) |
| Max. number of tines | 5 |
| Tine spacing | 80 or 130 cm (adjustable, two positions in the box frame) |
| Available tine lengths | 820 mm or 1,240 mm |
| Tine sets (sold separately) | Sets of 2, 3, 4 or 5 |
Product description
Who this bale fork is designed for
The Alö Bale Fork M 140 is a simple, robust attachment for front loaders for transporting round and square bales – straw, hay, silage and wrapped bales. It is designed for farmers, agricultural contractors and local authorities who transport bales from the field to storage, from storage to the livestock shed or onto a trailer.
Typical carrier machines: tractors with mid-range front loaders (approx. 600–2,000 kg lift capacity) with Euro mounting – i.e. machines of approx. 60 to 150 hp. Specific examples: John Deere 6R series, Fendt 300/500, Massey Ferguson 5700/6700, Deutz-Fahr 6 series, Kubota M7, New Holland T6/T7 with Quicke, Stoll or factory-fitted front loaders.
What the bale fork can do – and how it works
The M 140 can handle up to two bales at once – either two round bales side by side or two square bales stacked (with the rear frame). The tines pierce the bale from underneath; the box frame supports it from behind.
Tine positioning: The tines can be set in the lower box frame at 80 or 130 cm spacing. A single tine can also be fitted in the centre position – improving stability with wide round bales or heavy square bales. The maximum configuration is 5 tines.
Conus 2 – the tine system
Conus 2 is a standardised screw-in system for bale tines, used by Kverneland, Quicke/Alö and many third-party manufacturers, among others. The tines have a diameter of 44 mm and an M28 × 1.50 thread (square). They are screwed into the tapered mounting in the box frame and secured with a locknut.
Advantage: Conus 2 tines are interchangeable between manufacturers. Worn or bent tines can be replaced individually without changing the fork. Replacement tines are available from specialist dealers and spare parts suppliers (e.g. Sparex).
| Tine length | Suitable for | Not suitable for |
|---|---|---|
| 820 mm | Round bales up to approx. 120 cm Ø, small square bales (80 × 90 cm) | Large bales over 150 cm Ø |
| 1,240 mm | Large round bales up to approx. 180 cm Ø, square bales (120 × 130 cm and larger) | – |
Rule of thumb: The tine should penetrate the bale by at least two-thirds of the bale diameter. For a round bale with a diameter of 150 cm, this means a penetration depth of at least 1,000 mm – so use the 1,240 mm tine.
Euro mounting – welded on
The bale fork has a permanently welded Euro mounting (Euro frame). Euro is the most widely used standard for front loaders in Europe. If your front loader has Euro mounting, the fork fits directly – no adapter required.
The M 140 is also available as an MX version (Art. 11254003Q) and a Skidsteer version (Art. 11251692Q). There is also a version with +8° rollback (Art. 11256323Q) for loaders that need a greater tipping angle.
Extension Frame – the optional rear frame
The clip-on rear frame (Extension Frame, Art. 11215019Q) extends the fork's rear wall upwards. It is used to secure a second bale on top of the first – particularly important for:
- Non-self-levelling front loaders – the bale can slide backwards when the loader is raised or lowered
- Tractors without a cab – a falling bale poses a safety risk
- Transport on public roads – load securing requires rear support
Note: The Extension Frame is not compatible with the +8° version (11256323Q) – it would collide with the front loader's tipping cylinders.
Where the M 140 fits in the Alö bale fork range
| Range | Width | Max. load | Weight (without tines) | For |
|---|---|---|---|---|
| S+ 115 | 115 cm | 1,000 kg | approx. 99 kg | Yard loaders, small front loaders |
| M 140 | 141 cm | ⚠ enquire | 62 kg | Front loaders, mid-sized tractors |
| M 180 | 180 cm | 2,000 kg | 102 kg | Front loaders, larger tractors |
| L 200 | 200 cm | 2,500 kg | 170 kg | Three-point linkage / front loader, large bales |
| L+ 150 | 152.5 cm | 2,000 kg | 99–122 kg | Large front loaders, telehandlers |
| XL+ 200 | 200 cm | 2,500 kg | 157 kg | Telehandlers, wheel loaders |
The M 140 is the narrower of the two M sizes. It suits front loaders that are not designed for the M 180 in terms of width or lift capacity. The M 180 offers greater working width (170 cm vs. 130 cm) and carries heavier bales – but it is also heavier (102 vs. 62 kg) and wider.
What the M 140 does not have – and why
The M 140 has no folding tines. Folding tines (as on the L+ and XL+) reduce transport height on the road, but add weight and complexity. For a 62 kg fork designed for mid-range front loaders, simplicity is the design priority.
The M 140 has no hydraulic top-bale grab. If you need to secure bales from above, use the mechanical Extension Frame (clip-on frame) or upgrade to the L+ or XL+ with an optional Top Grab.
The M 140 has no provision for bolt-on hooks. It is not a “+” model. The mounting is permanently welded and cannot be converted to other systems.
Frequently asked questions
Are tines included with the Bale Fork M 140?
No. The tines (Conus 2, 820 mm or 1,240 mm long) are ordered separately as a set – in packs of 2, 3, 4 or 5. Choose the tine length to suit your bales: 820 mm for small round bales, 1,240 mm for large round and square bales.
Will the M 140 fit my front loader?
If your front loader has Euro mounting, the fork fits directly. Euro is the most common standard on front loaders in Europe. For MX mounting, the MX version is available (Art. 11254003Q); for Skidsteer mounting, the Skidsteer version is available (Art. 11251692Q).
How many tines do I need?
It depends on the bales. For round bales, 2–3 tines are usually sufficient. For square bales (especially large HD bales), 4–5 tines are recommended to distribute the weight evenly and prevent the bale from breaking.
What is the difference between the M 140 and M 180?
The M 180 is wider (180 vs. 141 cm, working width 170 vs. 130 cm) and heavier (102 vs. 62 kg). It is designed for larger front loaders and wider bales. The M 140 suits narrower front loaders and tractors where every kilogram of implement weight matters.
Do I need the Extension Frame (rear frame)?
The Extension Frame is recommended if you transport two bales stacked, have a non-self-levelling front loader or travel on public roads. It prevents the upper bale from falling backwards. Not compatible with the +8° version.
| Gerätetyp : | Ballengabel |
|---|---|
| Recording: | Euro borrowing |
| Working width: | 1.40m |